Can't format external hard drive enclosure

I connected a 250gb external hard drive enclosure to my mac osx 10.3.9. I was told that it was formatted to windows and that i would have reformat it to mac.
I was given instructions to go to Disk Utility, select the volume and click on the partition tab, but a partition tab didn't appear when i pressed it.
I checked out the info for the volume and this is what it gave me:
Name : New Volume
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/New Volume
File System : Winows NT Filesystem
Connection Bus : USB
IO Content : Windows_NTFS
Writable : No
Capacity : 232.9 GB (250,056,705,024 Bytes)
Free Space : 232.8 GB (249,976,606,720 Bytes)
Used : 76.4 MB (80,097,792 Bytes)
Number of Files : 48
Number of Folders : 0
Permissions Enabled : Yes
Can Turn Permissions Off : No
Can Repair Permissions : No
Can Be Verified : No
Can Be Repaired : No
Can Be Formatted : No
Bootable : No
Supports Journaling : No
Journaled : No
Disk Number : 1
Partition Number : 1
Final Cut Pro wouldn't let me use it as a sratch disk because it says it is on write-protected.
Does anyone know what i have to do to get the volume to work.
Thank you.

Jayden:
Here are some directions for formatting and partitioning a HDD:
Partitioning a Hard Disk Drive
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel.
Select # of partition in pulldown menu above Volume diagram.
Select 1 partition at a time and resize. (you can type size in the size field in main pane).
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Select each volume, in turn, under Manufacturer ID.
Select on Security Options button.
Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
Quit Disk Utility.
Dr. Smoke's FAQ Backup and Recovery has some hints on partitioning.
Please don't hesitate to post back with further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

Similar Messages

How can I format external hard drive for both Mac

Hi, I want to use my Seagate external Hard Drive 1 TB on both Mac & Windows. I go to know that FAT 32 supports both but it can not transfer more than 4 GB data at a time. Is there some better alternative? Please suggest.

As said above Use exFAT but do the formatting on a Windows PC as I have had problems of Windows seeing the drive when done on a Mac. Once done on a PC it was seen by both platforms.
Also if you are running XP on the PC you may need an update for XP to see and use exFAT drives. It may be included with XP SP3, i'm not sure, but Microsoft has an update for both XP SP2 and SP3 so that exFAT drives are usable.

Can't format external hard drive.

Hello, i just recently bought a western digital my essential 500gb.
but i am having some trouble reformatting it for my mac, i goto the "disk utility" application and goto "erase" but when i try to reformat it there i am unable to interact with the drop down menu and other fields.

Do this:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list.Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Can't Format external Hard drive Toshiba

Just got awesome toshiba 1tb usb3.0 canvio! very very excited.
Running 10.04 ubuntu netbook remix. Trying to format using disk utility and then gparted. The drive is not accessed in any programs but gives an error that it can't be partitioned because in use:
GParted 0.5.1
Libparted 2.2
Create Primary Partition #1 (ntfs, 600.00 GiB) on /dev/sdc  00:00:01    ( ERROR )
create empty partition  00:00:00    ( SUCCESS )
path: /dev/sdc1
start: 695228940
end: 1953520064
size: 1258291125 (600.00 GiB)
set partition type on /dev/sdc1  00:00:01    ( SUCCESS )
new partition type: ntfs
create new ntfs file system  00:00:00    ( ERROR )
mkntfs -Q -v -L "" /dev/sdc1
/dev/sdc1 is mounted.
Refusing to make a filesystem here!
libparted messages    ( INFO )
WARNING: partition(s) 1 on /dev/sdc could not be modified, probably because it/they is/are in use. As a result, the old partition(s) will remain in use until after reboot. You should reboot now before making further changes.
WARNING: partition(s) 1 on /dev/sdc could not be modified, probably because it/they is/are in use. As a result, the old partition(s) will remain in use until after reboot. You should reboot now before making further changes.

Jayden:
Here are some directions for formatting and partitioning a HDD:
Partitioning a Hard Disk Drive
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel.
Select # of partition in pulldown menu above Volume diagram.
Select 1 partition at a time and resize. (you can type size in the size field in main pane).
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Select each volume, in turn, under Manufacturer ID.
Select on Security Options button.
Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
Quit Disk Utility.
Dr. Smoke's FAQ Backup and Recovery has some hints on partitioning.
Please don't hesitate to post back with further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

Can i use windows migration assistant to transfer files from my windows formatted external hard drive to my mac?

I have a windows formatted external hard drive and a macbook pro. I was wondering if i could use the windows migration assistant to transfer files from my external hard drive to the mac

No.
Just connect the drive to your Mac. The Mac can read most Windows formats (it cannot WRITE Windows New Technology File System (NTFS) formatted drives.

Can I install my time machine back up onto a properly formatted external hard drive?

I have a MacBook Pro with a 750GB harddrive, with 500+ Gb of data on it. Just before I traverse to Europe, I did a TimeMachine back up.
I now want to give my Mac to a friend, and buy a AirMac when I get home. Even if I get the one with the largest drive it will not hold the full 500+'back up.
I have an 8 year old Mac Book pro at home as well. It will be a few months before I can buy the new AirMac. So my question is ....
Can I install my current backup on a properly formatted external hard drive, and will it then run like a computer --until I get my new AirMac?
Thanks for your help (and please don't be too tough on me for what may see to de a dumb question)
Soper777

The Time Machine backup is not bootable
You will have to install Leopard first

Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

If what doesn't work?
If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
You can then do any of several things:
1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

What are these files you are trying to copy over?
If they are program specific and there is no program on a Mac to read them then you'll have to find either a Mac version of that program or one that does the same thing and can read those files.
The file extension should not change just because you connect a NTFS formatted drive to a Mac computer. A Word Document is still a .doc/.docx ad the same for all other office type programs. Music files with an extension of .MP3, or whatever, should read the same on both system. Same goes for all other files like images with a .JPG extension.
Yes I would network them.
I would not use Migration Assistant. There is nothing on your Windows PC that can be used on the Mac other than your personal data files. No programs or settings can be carried over from Windows to OS X.
marimbapony1 wrote:
Also, when I view the files from the external hard drive, they show up as .nbz and are not recognized by any program on the Mac. Should I just abandon the hard drive option and start sharing files through the LAN approach?

External Hard Drive Enclosure won't mount

Hi
I have a Western Digital Caviar WD3200JD 1TB SATA hard drive inside an external startech enclosure
http://www.startech.com/item-download/SAT3510U2B-35in-USB-to-SATA-External-Hard- Drive-Enclosure-with-One-Button-Backup.aspx
It won't mount on my mac, it won't recognise it in disk utility either
I mounts fine on a PC running Vista. I have formatted it as NTFS but it will still not shoe on my mac
Anything else I can try?
Thanks!

my 12 inch powerbook laptop body was no good, but the hard drive was. I had a powermac g4 tower with a bad harddrive. After researching, I found this site and I mounted the laptop harddrive into the desktop and boom! my old laptop drive booted up on the desktop powermac. here is the link. a 3 yr old can install this it is way too easy, plus it cost 99 Cents. way cheaper than buying an enclosure.
http://www.b2cshop24.com/en/hard-drive-ide-25-to-35-adapter-converter-for-laptop .html

HT1338 I was backing up my MacBook with Time Machine on my new (correctly formatted) external hard drive. It was going fine when my 2 yo knocked the hard drive. Now TM said "failed" and the Mac refuses to recognize the external hard drive. Help please?

I was backing up my MacBook with Time Machine and using my new (correctly formatted) external hard drive. All was going well when my 2 yo knocked the disk leading to a "failure" by time machine (Latest Backup: Failed). Now the MacBook will not even recognize the hard drive. I have rebooted, tried all I can think of, but no acknowledgement of the drive. The drive itself makes noise and vibrates as if working, but nothing from the Mac. Please help or $100 down the drain... Thank you.

You may have already done these resets in the "tried all I can think of " portion of your post.....if not then here they are.....
PRAM
support.apple.com/kb/HT1379
SMC
support.apple.com/kb/HT3964
.....hopefully that is all that is required.....

FAT formatted external hard drive is not 'readable by this computer'

Hello support community
The problem: when I insert my 'FAT' formatted external hard drive (Samsung M3) into my mac book pro it comes up with the error message that says "the inserted disk is not readable by this computer" and I therefore cannot access the files.
The story (potential further details):
1. I had a problem with my mac where it took hours to load each time I turned it on, would only work when power was plugged in etc. so I had to reformat my mac hard drive (when I tried to veriify it said repair, that wouldn't work). So i'm starting with a recently reformatted, clean mac.
2. Before doing this I reformatted my external hard drive (whilst on windows machine) to FAT32 (so I can use on both windows and mac) so that I could back up my files.
3. I then transferred files from mac onto external hard drive and then also put them on a windows machine.
4. After reformatting mac hard drive when I then tried to transfer files back onto the mac I get the 'not readable' error.
The technical details:
Thank you very much indeed anyone who can help or can try and help
Cheers
Andy

Erase the drive and reformat using your Mac (Disk Utility)

PowerBook G4 can't see external hard drive

All of a sudden, my PowerBook G4 can no longer see my external hard drive (Maxtor 160 GB drive). The drive doesn't appear in the Finder, and it doesn't mount on the desktop. Thus, I have no way of accessing the files on my external hard drive.
I can see the external hard drive when I launch Disk Utility (and also when I launch TechTool Pro), so I know the hard drive and the USB connections are working.
Can someone please help on this?? I've tried unplugging everything and rebooting with no results. Thank you.
PowerBook G4 Titanium 1ghz processor Mac OS X (10.4.2)
PowerBook G4 Titanium 1ghz processor Mac OS X (10.4.2)

Everything looks clean, as far as I can tell.
Disk Utility says:
"The volume External Hard Drive appears to be OK.
Mounting Disk.
1 HFS volume checked.
No repairs were necessary."
TechTool Pro volumes test says:
Volume Structures
Thursday, March 29, 2007 6:24:26 PM US/Pacific
Passed
Volume: External Hard Drive
Mount Point: /dev/disk1s3
Format: HFS+ (Mac OS Extended)
Journaling: Enabled
Case-sensitive: No
Created: 03/26/07 01:26:09 AM
Modified: 03/26/07 01:26:09 AM
Capacity: 152.54 GB
Used: 49.81 GB
Available: 102.74 GB
Files: 86,074
Folders: 16,342
Writable: Yes
Ejectable: No
Removable: No
There are a variety of invisible files, settings, and parameters that the Macintosh file system uses to locate files, free disk space, and for other maintenance and management routines. Damage to these critical data structures can result in lost or damaged files and may even necessitate a complete reformat of the volume.
Precheck Structures
This test checks the readability of the various volume structures.
Boot Blocks
This test validates the Boot Blocks portion of the volume. This block of data is created when the volume is blessed.
Boot Blocks <Passed>
Master Directory Block
This test validates the Master Directory Block portion of the volume. This block of data is created when the volume is created and contains important data about the rest of the volume.
Master Directory Block <Passed>
Volume Header
This test validates the Volume Header portion of the volume. This block of data is created when the volume is created and contains important data about the rest of the volume like number of files and folders, and the amount of free space available on the volume.
Volume Header <Passed>
Allocation File (Bitmap)
This test checks the Allocation file. This file indicates which blocks are allocated for use and which blocks are free.
Allocation File (Bitmap) <Passed>
Extents File (B-Tree)
This test checks the Extents file. This file contains the extent data for the entire volume. Extents are the separate components of a fragmented file.
Extents File (B-Tree) <Passed>
Catalog File (B-Tree)
This test checks the Catalog file. This file keeps track of all the files and folders on the volume.
Catalog File (B-Tree) <Passed>
Attributes File
This test checks the Attributes file. This file tracks all of the attributes of each file and folder on a volume. Some attributes include whether the file is locked or not and the last time the volume was backed up.
Attributes File <Passed>
Startup File
This test checks the Startup file. The parameters within this file contain the information used by the computer ROM to determine what program will boot the computer as well as other system-specific aspects.
Startup File <Not Present>
Completed
Passed
Tech Tool Pro File structure says:
File Structure
Thursday, March 29, 2007 6:30:25 PM US/Pacific
Passed
Volume: External Hard Drive
Mount Point: /dev/disk1s3
Format: HFS+ (Mac OS Extended)
Journaling: Enabled
Case-sensitive: No
Created: 03/26/07 01:26:09 AM
Modified: 03/26/07 01:26:09 AM
Capacity: 152.54 GB
Used: 49.81 GB
Available: 102.74 GB
Files: 86,074
Folders: 16,342
Writable: Yes
Ejectable: No
Removable: No
This test checks for file resource corruption on the volume 'External Hard Drive'. If any damaged files are found, TechTool Pro will let you know which files have corrupted resources.
Analyzing File Structures
Passed
I'll let you know if Tech Tool Pro's surface scan of the drive turns anything up (it's running right now - takes several hours to run), but hopefulyl this provides a good starting point into painting a picture of my system...
Thx - Bob

Recommended SCSI to SATA converter for older external hard drive enclosure?

I have a SCI external hard drive enclosure that I would like to be able to use a with a SATA drive. Can anyone suggest an inexpensive, reliable SCSI to SATA bridge board?

Those are both good points. It's a really nice enclosure (its a red FW400 drive that instead of being a rectangular box, it has this funky wave shape). I could just use the drive with an existing SCSI drive and make it for something that doesn't need high r/w speeds like documents.

Finder can't see external hard drive

All of a sudden, my PowerBook G4 can no longer see my external hard drive (Maxtor 160 GB drive). The drive doesn't appear in the Finder, and it doesn't mount on the desktop. Thus, I have no way of accessing the files on my external hard drive.
I can see the external hard drive when I launch Disk Utility (and also when I launch TechTool Pro), so I know the hard drive and the USB connections are working.
Can someone please help on this?? I've tried unplugging everything and rebooting with no results. Thank you.
PowerBook G4 Titanium 1ghz processor Mac OS X (10.4.2)

By the way, here are my test results from running Disk Utility and Tech Tool Pro. Everything looks clean, I think?
Disk Utility says:
"The volume External Hard Drive appears to be OK.
Mounting Disk.
1 HFS volume checked.
No repairs were necessary."
TechTool Pro volumes test says:
Volume Structures
Thursday, March 29, 2007 6:24:26 PM US/Pacific
Passed
Volume: External Hard Drive
Mount Point: /dev/disk1s3
Format: HFS+ (Mac OS Extended)
Journaling: Enabled
Case-sensitive: No
Created: 03/26/07 01:26:09 AM
Modified: 03/26/07 01:26:09 AM
Capacity: 152.54 GB
Used: 49.81 GB
Available: 102.74 GB
Files: 86,074
Folders: 16,342
Writable: Yes
Ejectable: No
Removable: No
There are a variety of invisible files, settings, and parameters that the Macintosh file system uses to locate files, free disk space, and for other maintenance and management routines. Damage to these critical data structures can result in lost or damaged files and may even necessitate a complete reformat of the volume.
Precheck Structures
This test checks the readability of the various volume structures.
Boot Blocks
This test validates the Boot Blocks portion of the volume. This block of data is created when the volume is blessed.
Boot Blocks <Passed>
Master Directory Block
This test validates the Master Directory Block portion of the volume. This block of data is created when the volume is created and contains important data about the rest of the volume.
Master Directory Block <Passed>
Volume Header
This test validates the Volume Header portion of the volume. This block of data is created when the volume is created and contains important data about the rest of the volume like number of files and folders, and the amount of free space available on the volume.
Volume Header <Passed>
Allocation File (Bitmap)
This test checks the Allocation file. This file indicates which blocks are allocated for use and which blocks are free.
Allocation File (Bitmap) <Passed>
Extents File (B-Tree)
This test checks the Extents file. This file contains the extent data for the entire volume. Extents are the separate components of a fragmented file.
Extents File (B-Tree) <Passed>
Catalog File (B-Tree)
This test checks the Catalog file. This file keeps track of all the files and folders on the volume.
Catalog File (B-Tree) <Passed>
Attributes File
This test checks the Attributes file. This file tracks all of the attributes of each file and folder on a volume. Some attributes include whether the file is locked or not and the last time the volume was backed up.
Attributes File <Passed>
Startup File
This test checks the Startup file. The parameters within this file contain the information used by the computer ROM to determine what program will boot the computer as well as other system-specific aspects.
Startup File <Not Present>
Completed
Passed
Tech Tool Pro File structure says:
File Structure
Thursday, March 29, 2007 6:30:25 PM US/Pacific
Passed
Volume: External Hard Drive
Mount Point: /dev/disk1s3
Format: HFS+ (Mac OS Extended)
Journaling: Enabled
Case-sensitive: No
Created: 03/26/07 01:26:09 AM
Modified: 03/26/07 01:26:09 AM
Capacity: 152.54 GB
Used: 49.81 GB
Available: 102.74 GB
Files: 86,074
Folders: 16,342
Writable: Yes
Ejectable: No
Removable: No
This test checks for file resource corruption on the volume 'External Hard Drive'. If any damaged files are found, TechTool Pro will let you know which files have corrupted resources.
Analyzing File Structures
Passed
I'll let you know if Tech Tool Pro's surface scan of the drive turns anything up (it's running right now - takes several hours to run), but hopefulyl this provides a good starting point into painting a picture of my system...
Thx - Bob

Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5

can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
I can hear them running but I can not get them on the computer any more. They did work at one time.
Can any one PLEASE help?

Nothing appear on my desktop.
I did Repair and Verify the HDDs in Disk Utility>First Aid from the
Utilites App about a dozen times ans they all said everything was good
except for the last time there were erors found and I ran the
Disk Utility from the Start Up Disk and the repairs were made and everything
was subposed to te good and still Nothing on the desk top.
Ginger

Can't format external hard drive enclosure

Similar Messages

Maybe you are looking for