Can't get 2 XBOX 360's to open NAT on new E1000

I'm at my wits end and about to take this back. I had a Linksys WRT54GS that worked PERFECTLY with 2 360's, but even after using my old settings, using portforward.com's settings, and trying something I saw someone recommend here for someone having the same problem with an e3000, I simply cannot get both of them to open NAT. Can someone help?

I'm having the same problem also.  I have both Xboxs on static IPs and I put one on port forwarding and the other on DMZ but it doesn't seem to make any differences.  It's getting me frustrated because I've tried everything and it seems to work sometimes so I backup the configurations, but the next day it goes back to strict. 
I use to have a WRT54G v8 and it would work flawlessly, but this new E1000 model is giving me many problems.

Similar Messages

  • I can not get itunes to install and open on my new laptop i am so frustrated i have uninstalled and reinstalled at least a dozen times in the last month

    i can not get itunes to install and open on my new laptop i am so frustrated i uninstalled and reinstalled at least a dozen times in the last month
    i got a error 7 this time but have had diff ones befpre please help

    Will iTunes open in safe mode? Hold down CTRL+SHIFT as, or immediately after, you click the icon that starts iTunes and keep holding until you see this prompt.
    Click Continue.
    Assuming iTunes has opened, enable the menu bar, if necessary, with CTRL+B. Then go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Press OK, close iTunes, wait until it has had a chance to fully close then reopen.
    Will iTunes open normally now?
    If not, see Troubleshooting issues with iTunes for Windows updates for genral advice.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2
    tt2
    Message was edited by: turingtest2

  • I can't get a web site to open on my new iMac?

    I can't get a web site to open on my new iMac?

    Are you using Safari? Have you tried an alternative browser - Chrome, Firefox?
    Edit: What's the website - maybe it's down.

  • Can't get Xbox 360 Media Center Extender to work

    I am using Windows 7 Ultimate x64.  This is a retail copy.  I had previously set up Windows Media Center and successfully set up my Xbox 360 as a Media Center Extender.
    After a long hiatus of using Windows Media Center, I went to watch a movie in my media library through my Xbox 360.  It would appear to initially connect and then show the Windows Media Center loading screen and say "Contacting..."  After about 30 seconds, it would display an error asking me to make sure my Windows Media Center PC is turned on (it is).  I ran the Windows Media Center network test in the Xbox 360 and it tested fine.
    I attempted to delete the Media Center Extender in WMC and set it up again, but it always fails with an error "An error was encountered while configuring your computer for use with this Extender" at the part where it says "Configuring your Extender".
    I looked in the Event Viewer under the Media Center section and found event ID 543:
    Log Name:      Media Center
    Source:        Microsoft-Windows-Media Center Extender
    Date:          3/3/2010 10:13:20 PM
    Event ID:      543
    Task Category: Configuration
    Level:         Error
    Keywords:     
    User:          WILL7\swsander
    Computer:      WILL7
    Description:
    Media Center Extender Setup failed to create the PnP device with ID: uuid:10000000-0000-0000-0200-00125AC6E86F (timed out after 120000ms).
    Error: Element not found.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
        <EventID>543</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>4</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-03-04T03:13:20.805493500Z" />
        <EventRecordID>333</EventRecordID>
        <Correlation />
        <Execution ProcessID="9408" ThreadID="9760" />
        <Channel>Media Center</Channel>
        <Computer>WILL7</Computer>
        <Security UserID="S-1-5-21-2626302321-2836749625-3976135476-1001" />
      </System>
      <EventData>
        <Data Name="ID">uuid:10000000-0000-0000-0200-00125AC6E86F</Data>
        <Data Name="Timeout">120000</Data>
        <Data Name="Error">-2147023728</Data>
      </EventData>
    </Event>
    I also tried turning off the Windows firewall on the Windows Media Center PC, but this had no effect on the outcome.  I also tried deleting the Microsoft Windows Media Center Extender Host certificate and restarting the Network List Service, but these steps to did nothing to fix the issue.
    I am using the same computer with the same NIC with the same Ethernet cable with the same SOHO router (Linksys WRT54GL) with the same Xbox 360.  Any advice would be welcome at this point.

    Log Name:      Media Center
    Source:        Microsoft-Windows-Media Center Extender
    Date:          12/10/2010 9:51:55 PM
    Event ID:      592
    Task Category: Configuration
    Level:         Warning
    Keywords:     
    User:          Eric-PC\Eric
    Computer:      Eric-PC
    Description:
    Your Media Center Extender was set up successfully, but failed to connect (timed out after 180000ms).
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
        <EventID>592</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>4</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-12-11T02:51:55.176149000Z" />
        <EventRecordID>428</EventRecordID>
        <Correlation />
        <Execution ProcessID="16004" ThreadID="15676" />
        <Channel>Media Center</Channel>
        <Computer>Eric-PC</Computer>
        <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
      </System>
      <EventData>
        <Data Name="Timeout">180000</Data>
      </EventData>
    </Event>
    Log Name:      Media Center
    Source:        Microsoft-Windows-Media Center Extender
    Date:          12/10/2010 9:48:54 PM
    Event ID:      506
    Task Category: Configuration
    Level:         Information
    Keywords:     
    User:          Eric-PC\Eric
    Computer:      Eric-PC
    Description:
    Media Center Extender account Mcx1-ERIC-PC has been created for the Extender with ID: uuid:10000000-0000-0000-0200-001DD847D7F4.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
        <EventID>506</EventID>
        <Version>0</Version>
        <Level>4</Level>
        <Task>4</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-12-11T02:48:54.615896200Z" />
        <EventRecordID>427</EventRecordID>
        <Correlation />
        <Execution ProcessID="16004" ThreadID="9024" />
        <Channel>Media Center</Channel>
        <Computer>Eric-PC</Computer>
        <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
      </System>
      <EventData>
        <Data Name="User">Mcx1-ERIC-PC</Data>
        <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
      </EventData>
    </Event>
    Log Name:      Media Center
    Source:        Microsoft-Windows-Media Center Extender
    Date:          12/10/2010 9:48:49 PM
    Event ID:      500
    Task Category: Configuration
    Level:         Information
    Keywords:     
    User:          Eric-PC\Eric
    Computer:      Eric-PC
    Description:
    Media Center Extender Xbox 360 Media Center Extender 'uuid:10000000-0000-0000-0200-001DD847D7F4' discovered at address 192.168.1.2.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
        <EventID>500</EventID>
        <Version>0</Version>
        <Level>4</Level>
        <Task>4</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-12-11T02:48:49.155888500Z" />
        <EventRecordID>426</EventRecordID>
        <Correlation />
        <Execution ProcessID="16004" ThreadID="9024" />
        <Channel>Media Center</Channel>
        <Computer>Eric-PC</Computer>
        <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
      </System>
      <EventData>
        <Data Name="DeviceName">Xbox 360 Media Center Extender</Data>
        <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
        <Data Name="Address">192.168.1.2</Data>
      </EventData>
    </Event>
    Log Name:      Media Center
    Source:        Microsoft-Windows-Media Center Extender
    Date:          12/10/2010 9:48:36 PM
    Event ID:      573
    Task Category: Configuration
    Level:         Information
    Keywords:     
    User:          Eric-PC\Eric
    Computer:      Eric-PC
    Description:
    Media Center Extender found:
    ID: uuid:10000000-0000-0000-0200-001DD847D7F4
    IP Address: 192.168.1.2
    Interface GUID: {d8f53a92-8e85-4d1e-bde0-ba30d9b14449}
    NHED type: X02
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
        <EventID>573</EventID>
        <Version>0</Version>
        <Level>4</Level>
        <Task>4</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-12-11T02:48:36.095870300Z" />
        <EventRecordID>425</EventRecordID>
        <Correlation />
        <Execution ProcessID="16004" ThreadID="15608" />
        <Channel>Media Center</Channel>
        <Computer>Eric-PC</Computer>
        <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
      </System>
      <EventData>
        <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
        <Data Name="Address">192.168.1.2</Data>
        <Data Name="GUID">{d8f53a92-8e85-4d1e-bde0-ba30d9b14449}</Data>
        <Data Name="NhedType">X02</Data>
      </EventData>
    </Event>
    Log Name:      Media Center
    Source:        Microsoft-Windows-Media Center Extender
    Date:          12/10/2010 9:48:35 PM
    Event ID:      581
    Task Category: Configuration
    Level:         Information
    Keywords:     
    User:          Eric-PC\Eric
    Computer:      Eric-PC
    Description:
    Media Center Extender Setup has determined that the Windows Firewall is enabled in the Home profile.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
        <EventID>581</EventID>
        <Version>0</Version>
        <Level>4</Level>
        <Task>4</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-12-11T02:48:35.555869500Z" />
        <EventRecordID>424</EventRecordID>
        <Correlation />
        <Execution ProcessID="16004" ThreadID="14828" />
        <Channel>Media Center</Channel>
        <Computer>Eric-PC</Computer>
        <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
      </System>
      <EventData>
      </EventData>
    </Event>
    Log Name:      Media Center
    Source:        Microsoft-Windows-Media Center Extender
    Date:          12/10/2010 9:48:35 PM
    Event ID:      575
    Task Category: Configuration
    Level:         Information
    Keywords:     
    User:          Eric-PC\Eric
    Computer:      Eric-PC
    Description:
    Media Center Extender Setup started with the following settings:
    Affiliation code: 159
    Username: Eric
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
        <EventID>575</EventID>
        <Version>0</Version>
        <Level>4</Level>
        <Task>4</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-12-11T02:48:35.485869400Z" />
        <EventRecordID>423</EventRecordID>
        <Correlation />
        <Execution ProcessID="16004" ThreadID="14828" />
        <Channel>Media Center</Channel>
        <Computer>Eric-PC</Computer>
        <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
      </System>
      <EventData>
        <Data Name="AffCode">159</Data>
        <Data Name="User">Eric</Data>
      </EventData>
    </Event>

  • Can only get XBOX 360 to work by unplugging and then plugging in ethernet cable?

    I have 2 desktop computers, 1 laptop computer and 1 Xbox 360 using this WRT54GS ver 6 router.  The desktops and the xbox are wired and the laptop is wireless.  I replaced my old linksys router which I never had a problem with for this one.  If my desktop computer is turned off and I turn on my XBOX, the router does not recognize the Xbox.  I mean the XBOX is plugged into port 3 and that light does not flash on the router.  Now, if I turn on my computer and then turn on my xbox, it still doesn't work.  If I turn on my computer, turn on my XBOX and then unplug the xbox ethernet cable from the back of the router and then plug it back in, then the router recognizes it and it works great.  I have had 2 chat sessions and I phone session with linksys and they cannot figure it out.  They had me go into my xbox and set a static IP address, gateway and DNS.  Then she had me go into forward a few ports on the router.  I never had to do any of this stuff with the old router by the way.  The last guy I talked to on the phone said I need to figure out a way to turn off "MAC Address cloning" in the xbox.  I checked  and there is no way to do this, so I think he is wrong about this.  Does anyone have ANY ideas as to why this problem is happening? 

    I had the same problem and I just typed my settings in manually on my xbox 360's network settings.(IP, and DNS).
    Message Edited by JustaGamer on 02-03-200703:02 PM

  • WRT160N V2 - Connecting TWO Xbox 360's with OPEN NAT...a nightmare. :(

    Need to run two Xbox 360's on a WRT160N V2 both with open NAT.
    This must be possible...somehow.
    I've tried a few times through the linksys support chat (which seems to be gone now?) to get this working properly but always fails. I've got my http://192.168.1.1/ open, so please if anyone knows how this works that'd be just awesome.
    Both 360's are connected via wire. We want to be able to play the same games at the same time in the same party while both having an open NAT. Right now only one of us can have an open NAT while the other has a Moderate or Strict. We have plenty of speed, but that stupid NAT makes it nearly impossible for us to connect to games together. Then even when we DO connect to a server/lobby it takes forever for that lobby to fill up with other players as they can't connect to US. Painfully annoying.
    I DID do a search of this very forum and found a thread or two, but they are very long and I am having a hard time filtering what is correct or not. Too many people saying different things with no reponses as to whether or not their solution worked. I'm still reading through them, I'm not a technician in any sense and don't want to mess it up more than it already seems to be. I am capable of reading/following instructions, so if anyone knows I'll give you all my "One Free Internet" coupons.

    You can try this link and it will help you in setting up your XBOX with your Router. And for your 2nd XBOX Enable DMZ and assign a Static IP to your XBOX.

  • I can't get my mail app to open! Im new to this please help!

    I have just been deleting emails which don't seem to be deleted first of all but now i can't even open my mail app. I forced it to close and now i can't get it to open again!

    Hi af32,
    Welcome to the Apple Support Communities!
    I understand how concerning it must be to not be able to open the Mail application. In this situation I would read over the first small article attached.
    OS X Mavericks: If you can’t open an app
    http://support.apple.com/kb/PH13849
    If you still cannot open Mail, it may be necessary to reinstall OS X.
    OS X Mavericks: Reinstall apps that came with your Mac
    http://support.apple.com/kb/PH14193
    Have a great day,
    Joe

  • How can I get my bookmarked sites to open in a new tab by clicking on them, like the old Netscape?

    Every time I click on a bookmark, it overrides the current tab. How do I get it to open in a new tab? Or at least have an option like the old Netscape used to do.

    Bookmarks act the same as links on a webpage. If you want to open them in a new tab either right-click and 'open in a new tab' or middle-click (ie click with the scroll wheel).

  • How can I get embedded advertising links to open in a new window?

    I am working with Muse and have tried editing the HTML but it didn't work.
    Thanks, Sandy

    If you are inserting links as text and then through Hyperlink adding external link , then you can setup the link to open in a  new window.
    http://helpx.adobe.com/muse/using/creating-hyperlinks.html#id_29862
    In case the link is included in any html frame , you can declare target="_blank" which would open the links with a new window.
    Thanks,
    Sanjit

  • I can't get pages 5.01 to open pages files from iCloud, although they open in iCloud Pages without difficulty.

    I can't get Pages 5.01 to open Pages files from iCloud, although they open in iCloud Pages without difficulty.
    I am using the most up to date version of Mavericks and Pages and can log into iCloud without any problems.  Is this just a glitch?  The files all behaved properly under previous versions and the initial release of the new version of Pages.

    Pages for iCloud beta is a weird beast and as it says "beta".
    I think it is the least compatible of all the many different .pages files floating around out there.
    Peter

  • With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window.  Can I go back to just double clicking ?

    With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window.  Can I go back to just double clicking ?

    Of course. To do it, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and untick "Open folders in tabs instead of new windows".

  • Inspire 5200 5.1 - Can it run Xbox 360??

    I have the Inspire 5200 5.1 system on my PC.
    I can run the Xbox 360 through the PC by running the audio outputs through the 'Line In' port on my sound card. This is probably not 5.1 but it is good enough for what little I use the Xbox.
    However I would lke to use the Inspire 5200 direct to the Xbox without going through the PC if it is possible WITHOUT an expensive decoder.
    Is the Inspire capable of doing this?
    Is it a stand alone speaker system or does it need power from another source?
    If I hook the audio out from the Xbox into the 'Front' input on 'Audio Input' will this work?

    This should work as the 5200s are powered speakers. However you'll need a phonox2 to stereo mini-plug adapter so you can plug it into your speakers (the green jack on the speakers (Front L/R)).

  • How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?

    Hi
    How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?
    None of the normal mechanisms of setting an application to be the DEFAULT application for the .HTML file type seem to work...
    Extremely irritating.
    J

    Jon Fritz II wrote:
    So when you right-click an .html file and choose Open With, what are you seeing?
    Is the check box for "Always use the selected program to open this kind of file" checked?
    A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
    >Is the check box for "Always use the selected program to open this kind of file" checked?
    Jon Fritz II wrote:
    So when you right-click an .html file and choose Open With, what are you seeing?
    Is the check box for "Always use the selected program to open this kind of file" checked?
    A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
    > Is the check box for "Always use the selected program to open this kind of file" checked?
    Yes.
    J

  • I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

    I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

    This tech doc should help. Simply try out each step one at a time until it works.
    Error: Waiting for Bridge | Mini Bridge panel
    Gene

  • How can I get Mail to stop automatically opening on startup of my MacBook?

    How can I get Mail to stop automatically opening on startup of my MacBook Pro? It's not in my startup items folder. But it auto-opens every time I boot up

    In System Preferences / General make sure the Restore Windows ...... is unchecked.
    Also uncheck in the shutdown dialog box

Maybe you are looking for

  • Creation of view and use it as internal table

    dear community,                My questions is taht i am write a select quary in that data is very huge so that it cant inserted in to internal table(memory size of internal table) so i thing that i create aview same as data base table and when write

  • How do I make Restore Session work better?

    Using version 18.0 I just tried to Restore a session and ended up with one from yesterday. The other day I got one that was several hours old. These both cost me a lot of productivity. If the browser keeps crashing and its not going to restore proper

  • How do i get the apps on my i phone 5 on my mac book pro

    how do i get the apps on my iphone 5 on to me macbook pro

  • Search takes 3 times to recognise internet connection after update

    Hi - after updating to iTunes 7.1.1 the Search works only after 3-4 attempts. The error is that it doesnt recognise that I am connected to the Internet and asks me to check my network settings. Only after I press Search 3-4 times does it work. Occass

  • XMII Query Selected tags not working

    I am using a query template for tag list against a UDS PI server and the "Selected Tags" dos not seem to wok. It retuns all tags or masked ones even when the check box "Use Group.Mask .....'  is unchecked. The UDS does not have groups since the alias