Can't get 5510 to talk to SSM-10

Hi
I click on the IPS tab, give it's ip address, but it never comes talks to the ssm-10 card and never has.
What am I missing? :)
Any help guys?
Thanks
Kevin

You can either session to the SSM from the adaptive security appliance (by using the session 1 command) or you can connect directly to the SSM using SSH or Telnet on its management interface. Alternatively, you can use ASDM.
take a look at this link:
http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/ssm.html#wp1052040
I hope it's usefull,
Cheers

Similar Messages

  • Outlook 2010 Office 365 and Exchange -- can't get them to talk to each other

    I saw similar question posted with no answer.  
    Have Office Outlook 2010 on HP Pavillion dv7 running Windows 7 Premium and Office 365 on HP Envy x 2 running Windows 8 and can't get either of the Outlook programs to talk to Exchange.  They both ask for passwords and none of the ones I try seem to
    work. Yet the email program that came with the HP Envy x2 (part of Windows 8?) manages my Exchange emails as well as my gmail and bellsouth.net accounts.   
    If for some reason I can't link Exchange to more than one version of Outlook (I'd like to connect to both), suggestions for connecting Exchange to Outlook 365 would be welcome.  
    Suggestions?  

    Make sure you have installed the latest SP for Office 2010 and all the other updates. It also requires the PRO PLUS version of Office for all features to work as expected, if you are using Standard or Home this might be the problem. Check here for more info:
    https://support.office.com/en-us/article/Outlook-license-requirements-for-Exchange-features-46b6b7c5-c3ca-43e5-8424-1e2807917c99?ui=en-US&rs=en-US&ad=US
    Other than that, make sure you use the full [email protected] credentials

  • I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

    I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have.  would love some good tips.

    Try this:
    Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

  • I can't get Fox News talk everywhere on iTunes radio

    I use to be able to get this radio station thru iTuned not it just says getting playlist then nothing.  Anyone have a suggestion? thanks

    You can't get Fox News? I should count your blessings

  • How can I get firefox to talk to a second network on my computer?

    I have 2 NICs in my computer. I want to connect to a server on the second NIC. However, firefox must be only trying to connect thru the first NIC to the internet. When I enter the IP address from firefox (which Windows would route to the second NIC) all I get is a timeout. It will not connect. How do I fix this problem?

    Everything on the subnet is used for animated lighting control. The "servers" on the other end of the network are controllers for controlling RGB lighting. The software/ servers communication using a protocol called E1.31 which is a specialized protocol for lighting control. It uses Ethernet as the transport. The controlling software encodes the control signals and addresses them to a specific address (such as 10.10.10.151). The addresses used are setup in the software itself. Other than addressing the data, the software does no routing and has no knowledge of how the signal arrives at its destination. I know that the software, network, routing table, and controllers are all working properly because the software properly controls the lights.
    However, I need to be able to "talk" with the controller, via my browser, in order to adjust the controller's settings. And Firefox (and Internet Explorer) will not connect to the controller under this network configuration. If I disconnect the network on NIC 1 (home network and internet connection), then Firefox will connect with the controller on NIC 2 with no problem. That has been the problem that started this question.
    I am assuming that Firefox is sending the address request straight to the internet instead of Windows actually routing the request to the proper NIC. But I don't know enough about how Firefox works to correct this. Of course, I am just guessing about how Firefox is routing the address. I could be way off.
    I hope this helps in the understanding of my problem.
    Thanks for your interest.
    Jim W

  • How can I get someone to talk me through a problem?

    I tried syncing iPad on computer and it changed all my apps & worse, I can't seem to get the book I was reading back on pad.  Can anyone help?  I'm definitely computer/iPad challenged!

    This is how you set your sync preferences for anything that you want to sync to your iPad. This uses apps as the example but this is the way that you can select all content to sync to your device.
    "Click on" in the instructions below means to put a "tick" in the boxes next to the names of the apps in the apps list.
    Connect the iPad to the Mac and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Apps Tab on the right.
    Click on all of the apps that you want to sync,
    Click on the Sync Apps Heading.
    Click on Apply in the lower right corner of iTunes
    You can go into the Music tab, the Photos tab, Movies, books and so on and select all of the content that you want to sync, just like you did here. You can make all of your selections in all of the different tabs in iTunes and then Click on Apply when you are finally ready to sync the device.
    You also have the option of turning off auto sync if you like so that you can make the selections or make changes every time that you sync your iPad. Launch iTunes and go to iTunes>Preferences>Devices and check the box at the bottom - Prevent iPods, iPhones and iPads from syncing automatically. Click OK and quit iTunes. Then connect the iPad, launch iTunes and go through the priced up outlined above.
    If you prefer to leave auto sync turned on, you can still go back and make the changes as described above, after the iPad auto syncs.
    Read the first four support articles (or more if you like) in this Google search for more information about syncing with iTunes.
    https://www.google.com/search?q=syncing%20with%20iTunes

  • Camera RAW and CS4 32 bit.  Can I get them to talk?

    Hi all,
        Can anyone tell me how to get Camera RAW to open 32 bit CS4 instead of 64 bit?   I prefer to work in 32 bit for my legacy filters.
    Thanks you.

    Semaforic,
          Thanks for the idea.
          Unfortunately, changing file associations in Bridge to the (x86) phtotshop.exe didnt change anything.  Bridge calls up ACR which then opens the image in 64 bit  CS4.
       I swore that one was gonna work.
      It may just be that I have to go in through 32 bit.  Not a big deal really but still.
      Thanks again.
    Anyone else??

  • I can't seem to sync my current email with my iCloud account,  how can I get these to talk to each other?

    My wife is cruising me everyday about her email not being sync with her MacBook and iPhone.  I can't seem to match/sync them up.   Any suggestion?  I am using a none Mac.com, iCloud.com email address,  is this allowable?

    See Empty/corrupt library after upgrade/crash...
    tt2

  • How can I get iPhoto to talk to Aperture?  Or, probably more accurately, Aperture to talk to iPhoto?

    I have reconstructed my Aperture library--and, finally, replaced it with an older version from my back-up drive and then worked that one over.  Still, Aperture only occasionally shows up in my iPhoto media option pane, and rarely in some other iLife programs.  When it does, changes in Aperture don't show up in iPhot when they should (this makes pulling photos or versions over to iPhoto, then, impossible).  None of the tech guys at Apple could get me so far as I was able to get myself last week.
    Help!

    As this affects iPhoto and other apps, it's not an iPhoto problem. It's on the Aperture end. I think you'll get best results on the Aperture forum.
    Regards
    TD

  • Can't get safari to talk to any web site except mobileme on winxp

    Safari 3.1.2 for first time on Windows XP looks like it's not getting out to net. "Safari could not open the page “http://www.apple.com/” because the server is not responding." for all sites except to MobileMe login ("auth.apple.com..." with an HTTPS URL)
    Using LAN to hi-speed broadband modem connection from Optimum Online. IE and new Firefox work fine. Proxy (Preferences) off, tried on/off combinations without success. CA firewall settings look good. Works fine through LAN/WIFI/router from other machines, e.g. Powerbook/Leopard and MacBook Pro/Tiger, etc. Any suggestions?

    Windows Firewall should automatically get disabled when you did install the CA firewall.
    If not then disable the Windows Firewall right now,
    Since having 2 firewalls enabled at the same time will just lead too problems.
    Message was edited by: J~G
    Message was edited by: J~G

  • I can't get iphoto to talk to itunes or my iphone

    When I used my pc with my iphone i plugged it in and itunes popped up on my screen then another screen asked if I wanted to upload any new photos it found...easy. Now I have a mac it , annoyingly, takes some photos not all and has only ever offered to upload photos to my iphone I don't think it knows how to do it the other way or that that is the whole point...... anyone? I already know I'm stupid.

    Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

  • How can I get the screen to lock on my iPhone 4, so I don't press buttons while talking?

    I just upgraded to the iPhone 4.  When I am talking on the phone, the screen doesn't lock, so I am constantly pressing buttons or hanging up on the person I'm talking to.  How can I get the screen to lock while I'm talking?  It's driving me NUTS.

    The otterbox is one of the culprits. Take the phone out of the case and see if it still happens. If so it is not the case. If the problem goes away, then you may need to make the hole slightly larger. My family has three iPhone 4's in otterboxes and none have this problem. Other users on this forum have reported success with the above methods.

  • Can you get an iphone 5 at target that uses AT&T or Verizon network and use the Straight Talk plan from Walmart?

    Can you get an iphone 5 at target that uses AT&T or Verizon network and use the Straight Talk plan from Walmart? I don't have AT&T or Verizon network and I don't want to get them but I was just wondering if you can get the iphone 5 that is at target and use it for the straight talk plan. I will be getting the straight talk plan but I would like to do some research on the iphone 5 first for straight talk. At walmart the phone is $544.99 and I think it will be a lot cheaper to buy it at target.
    Thank You!

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • My computer had to be restored at the apple store. When they did it my Microsoft word, powerpoint, and excel were all deleted! How can I get them back? Who do I talk to, Apple or Microsoft?

    My computer had to be restored at the apple store. When they did it my Microsoft word, powerpoint, and excel were all deleted! How can I get them back? Who do I talk to, Apple or Microsoft?

    you are responsible for reinstalling any apps.  It is not Apples responsibility as outline the the service agreement.  Do you have the product key? 

  • How can i get my iphone on straight talk to send and receive mms?

    I have an iPhone 4 on straight talks network. I have never been able to send or receive mms messages to anyone other than a device with iMessage.  How can I get it to work?  I dont want to change to a Galaxy or any other kind of phone, but I will if this doesnt get figured out.  Straight talk says its an issue with Apple products. Please help!!

    Hey Jstugelmeyer,
    First, I would go through these three steps:
    Restart your device.
    Update to the latest iOS Software.
    If you are trying to send a message to multiple recipients and you type in each contact manually instead of using the contacts list, make sure you tap return instead of space to separate each one.
    Then, if you still can't send or receive MMS messages:
    To send and receive MMS messages on your iPhone, verify that your wireless carrier supports MMS2.
    Ensure that MMS Messaging is turned on in Settings > Messages.
    Verify that your phone is able to access cellular data.
    Some carriers allow you to edit your APN (Access Point Name), which may prevent MMS from working.
    If you are roaming outside your calling area, make sure you have Data Roaming turned on in Settings > General > Cellular to send or receive MMS content.
    While on a phone call, you will be unable to send or receive MMS messages when using an EDGE, GPRS, or any CDMA cellular data network. After the phone call ends, you will receive any incoming messages. If you tried to send an MMS message, you may need to send it again.
    If the issue persists and your wireless carrier has confirmed that your wireless account is provisioned2 for MMS, restore the iPhone.
    via: iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

Maybe you are looking for

  • Background image  for JPanel using UI Properties

    Is there any way to add background image for JPanel using UI Properties, code is if (property.equals("img")) { System.out.println("call image file in css"+comp); //set the background color for Jpanel comp.setBackground(Color.decode("#db7093")); here

  • Deployment : Exporting and importing a ABAP code to other SAP Server

    Hello Expert, I am very new to SAP ABAP. My query is , If we write a code in user exit on one SAP server and if we need to deploy the same on other SAP server who are not tightly coupled with each other , How should we do?? Is there any way to export

  • Premiere Pro CC will not open any prproj files.

    I'm working on a feature length.  We have a premiere in 2 weeks!  My PC computer shut down yesterday afternoon so I did not restart.  (It sometimes does this)  When I switched it on this morning, I tried to start Premiere Pro but it moved at a crawl

  • Unable to set tabbing order for a typedef

    Attached is a .CTL file that is for a typedef in my project. I'd like to set the tabbing order. I'm using the "Array to Cluster" VI (is it a VI?) to fill it with data, however because the controls are not in the correct order, the data is no being pu

  • How can I read several avi files in single DVD with FRONT ROW?

    Hi! Is it possible to make Front Row read several movie files in a single DVD? I burned 6/7 avi files in each DVD, but Front Row can't even read the DVD itself! Thanks!