Can't get a 3G connection on my new iphone

I am told that there is a 3G outage in many areas due to the wildfires in Colorado. I just got my new iphone two days ago and have not been able to get 3G internet connection, only wifi. Is anyone else without a 3G connection?

I have a 3G signal (on my BlackBerry), but no data is flowing. 6 different email accounts, 5 are POP, one is Enterprise/BES. I can send, but I am not receiving. Last message received around 2:00 Central Time.

Similar Messages

HT1414 Can't get past set up page with new iPhone

Just got a new iPhone from Apple store. Tried to restore from backup, but can't get past the "connect to iTunes" screen on my phone. I can see my phone in iTunes, have synched it to my computer, installed phone updates from my computer, but still can't get past the "connect to ITunes" screen. I am connected...I can't figure out what's wrong that I can't get past this screen to my home screen.

I went into the Apple store and the guy fixed it somehow using icloud (strange since I backed up to itunes not icloud) but I'm not complaining!

Can't get Imac to connect to Ipad or iphones

I just got an Imac running version 10.6.7... Intel Quad
It came with Facetime and Im getting frustrated.
I have set it all up, even verifying email to connect with me.
I have connected / facetimed with my daughters I phone and ipad 2, but t 15min later and i can't get connected with anyone or any devise.
My daughters see the call or facetime come in, try to connect and it wont.
If it is a modem thing, then why does it work sometimes then stop later.
I have looked all over the internet for support and cant find anything, yet i am new to looking.
Please help
Darin

can you believe this...
I call support,,,,facetime connects with my ipad2 fine...right away ( the old take car to mechanic)
call daughter it connects with her iphone4...
say goodbye to support chat with daughter a little while...
hang up try and call duaghter back right away and no luck... Her we go again...it wasnt 1 minute ... it was a test
she see call (facetime) come in but we dont connect ...
she tries to facetime me....nothing comes through..
Help help!!!
another call to support. this is getting old

I can't get itunes to bring up my new iphone 4 to where I can transfer stuff from my account or even back up the stuff from my 3GS to it. Help please...

I have been trying to sync my new iPhone 4 to my itunes account. I want to transfer stuff from my 3GS to this phone. Any suggestions would be appreciated. I have uninstalled itunes and all apple components and reinstalled and no success. It shows the phone sync when itunes comes up and then when I click on the phone on the right side it will just disappear and I want to get to the menu where I can I back up info from 3gs to this new phone.
Thanks for all the help and suggestions.

I have little idea what this is all about but unless you are sure it is an iTunes question and not anything to do with the receiver you are better off trying to get support for a hardware specific issue on the manufacturer's support services. You'll get a lot of people here who know iTunes but you're going to have to be fortunate to get one with that specific model receiver.
http://usa.yamaha.com/products/audio-visual/av-receivers-amps/rx/rx-v575_black_u /
iTunes: Using AirPlay - https://support.apple.com/en-us/HT202809 - "Learn how to use AirPlay to stream videos, music, and photos wirelessly from iTunes on your computer."

Can I get Apple to block a brand new iPhone 5S?

I sold a brand new phone (still in its original box, unopened) on eBay only to find out the persons account was hacked. I have reported it to the police here in England, UK. Thing is I dont want the scammer to be able to use this phone and I want it blocked. Only issue is the phone was never taken out of its box and registered to any network here in England.
How can I get Apple to block the IMEI of the phone? I thought with IOS 7, Apple brought in new technology that allows it to track where each of their units are. Surely they can deactivate it.

Sorry, Apple can't help you, & Activation Lock only kicks in AFTER the phone is first activated, not before.
Sorry, but it appears the scammer got away free & clear, unless you can get a carrier to Blacklist the phone. Although that's doubful.

I recently backed up my iPhone using iCloud and now can not get my camera roll onto my new iPhone or my Mac. Did I lose all the photos from my old phone?

I recently picked up a new iPhone6. Before i handed in my old phone(iphone5), I backed it up using iCloud.
Now I can't seem to get the photos from my old camera roll onto my new phone or my Mac. Did I lose all
the photos from my old phone?

1. Create a backup of your iPad to iTunes on your computer or to iCloud
2. Transfer any and all photos & videos on your iPad to your computer.
3. Erase the iPad and restore the iPhone's iCloud backup to the device.
4. Transfer any and all photos & videos on your iPad to your computer.
5. Restore the iPad backup you reated in step #1 back to the iPad.

HT1766 How can I get my iTune files to my new iPhone 5S, I have many albums that I would like snyced

Hello, is there anyone that can help me with this question?

Open itunes, connect iphone, select what you want, sync

Can't copy some songs from old to new iphone

I have some songs on my old Iphone that are listed on my computers itunes, but aren't actually on my computer (they have a small exclaimation mark by them). I can't get these particular songs onto my new iphone. I get a message that could not transfer because the original file could not be found.

Of course you cannot get them onto the phone, as you stated, they are not on the computer.
It is impossible for iTunes to sync content to an iDevice that does not actually exist on the computer.
Restore the missing files from the backup of your computer. You do have a backup of your important data, correct?

Hey my brother just got an ipod touch and i can't get it to connect to itunes what to i do he's really excited HELP!! :)

hey my lil brother just got an ipod touch and its saying connect to itunes and its plugged into my computer and im at the itunes website but i can't get it to connect can anyone HELP ME??!! my mom said that she wants his ipod to be connected so that its on my itunes account so i can see if he buys anything.
PLEASE HELP ME !!!
~Maddie

iOS: Device not recognized in iTunes for Windows
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar

Just brought home my IPad. I have the MIFI on and it is bringing in a signal to my IMAC but I can't get it to connect to my IPad. Any suggestions?

I just brought my IPad home but can't get it to connect to my MIFI. The MIFI is on and working as it's sending a signal to my IMac. How do I get it to recognize the MIFI so I can go online with my IPad?

Does your iPad see you network? If no, are you broadcasting its SSID?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

I can't get a database connection.

Background: I've already built two sites with databases using DW CS6, PHPMySQL, and the same hosting company, so I know they allow remote connections. (I'm developing using the remote host because I've never found a tutorial for how to move it all from local XAMPP to my host - but hey, it's been working fine so far.)
I set up the database using CPanel Databases, added the user and password, no problem. Went into PHP MySQL and added a table, logged out and back in, the table is there as defined.
In DW, I double-checked the testing server, tested the connection, and it connected successfully.
Then I opened a page for editing and added a database connection (all as I had done on the previous two sites that work fine). I named the connection, entered the user, the password and tried to SELECT a database. No luck. HTTP Error 404. I manually added the database (the only one) and clicked test. Again no luck. HPPT Error 404.
I double checked the testing server, double checked the DB information, and nothing seems to work.
Any clue what I'm doing wrong? Thanks so much if you can help.

UPDATE:
Okay, this is really getting weird. As a typcial computer nerd, I know there are many roads to success, so if one doesn't work, try another.
Trying a different solution, I opened a test.php page and wrote the following code:
<?php
echo "<p>Now testing database connection.</p>\n";
$db_server = "localhost";
$db_username = "mcsb831_mbradmin";
$db_password = "***(redacted)***";
$link = mysql_connect($db_server, $db_username, $db_password);
if (!$link) {
    echo "Could NOT connect.<br />\n";
}else{
    echo "Connected Successfully.<br />\n";
    mysql_close($link);
I loaded the page to the server and guess what? I got the message "Connected Successfully."
Hooray! Now I know the database server is running, and the database and user name and password are valid.
I went to the DW MbrConnect01.php file (the name of the CONNECTION file that Dreamweaver creates when I tried to make the connection through DW), and verified the database name, user name, and password were correct -- I copied and pasted them from the code above to make absolutely certain there were no transcription errors. Here's that file:
<?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_MbrConnec01 = "localhost";
$database_MbrConnec01 = "mcsb831_members";
$username_MbrConnec01 = "mcsb831_mbradmin";
$password_MbrConnec01 = "***(redacted)***";
$MbrConnec01 = mysql_pconnect($hostname_MbrConnec01, $username_MbrConnec01, $password_MbrConnec01) or trigger_error(mysql_error(),E_USER_ERROR);
?>
And guess what?
I GOT THE STINKING ERROR MESSAGE AGAIN!!
(See previous post for the full text of the message.
Yes, I checked the server using an FTP browser for the presence of the required files, and they are there.
Does anyone have a clue what's going on here? I would absolutely love to use DW's DB automation tools, but none of them will work if I can't get a DW connection to work.
I notice that my code uses mysql_connect while the DW-generated code uses mysql_pconnect (which is deprecated), could that be the culprit? How do I fix it if so?
PLEASE, can someone help?

How can I get an automatic connection to wifi on startup?

We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

An 'uninterruptible power supply' that automatically steps in and takes your computer
off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
a certain degree, depending on model and should there be a valid reason to do so.
An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
for less than a replacement logic board or an hour of authorized Apple repair, the UPS
is a fairly good investment. Backup battery is user-replaceable in the better made units.
Most of them offer extra ports that do not use the battery-backup power feature. If you
need to have more items run when the power switches up/down or out, you'd need to
consider a larger capacity backup power unit. In some instances, the makers of these
(for a time, perhaps even now) did caution users to not install more than one UPS per
room when the same leg may have inadequate grounding, since these can dump the
excess surge power from several different UPS units and overload the ground.
That said, the gamble is yours. I've found to have and use these is some protection
and when away from the computer. Most settings for controlling them appear in OS X.
No additional software is required. Other settings may be on the UPS front panel.
Good luck & happy computing!

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Can't get a 3G connection on my new iphone

Similar Messages

Maybe you are looking for