Can't get a hot-key assigned to a Mail submenu

This is in 10.5.2. by the way...
I have a sub-menu of Get New Mail called "Gmail" where I fetch email from (you guessed it) my Gmail account.
In the keyboard shortcut panel I can't assign a key to this. Anything I set in the panel doesn't show up in the Mail sub-menu. I have tried restarting Mail after making the setting in the keyboard panel, but that doesn't help.
Is this possible?
Thanks,
doug

I have that same SSD that I've tried for the last 18 hours to get Lion installed via Network Recovery. In various spots along the download, it will error out and say "could not download all..." -- forget the rest of the sentence off the top of my head. But it basically says it can't finish downloading Lion. I currently have it on the 6th attempt after trying the partition resize trick as well as deleting and reformatting the drive too. So far I can't get the Lion download to actually finish.
Also, the download for Lion is incredibly slow, and it's not a network connection issue. I've tried on 3 separate ISPs with a connection speed of no less than 12 Mbps and the fastest time I've seen for a completed download based on the figure within Network Recovery is 9 hours.
I remember using Network Recovery on my mid-2011 Air to try out the (at the time) new feature and it downloaded Lion in ~3 hours max. Not sure why it's now 10+ hours for the same file I downloaded in July.

Similar Messages

Got a new keyboard and can't get dashboard hot-key to work

Hi. I have a 24" IMac from Dec 2007 and I'm running Lion.
Yesterday, I had to replace my keyboard. I got a new one at the Apple Store near me.
The new keyboard seems to be the same, except the F4 function key is different. In my previous keyboard, the F4 function key had a little icon for the Dashboard.
On the new keyboard, there is a different icon and I'm not sure what it's of.
Anyway, I opened the Mission Control preferences (from System Preferences) and F4 is assigned to Show Dashboard.
However, when I hit F4, nothing happens at all. The Dashboard only shows up when hiy Fn-F4.
So, is there any way to get the Dashboard to open when I hit just F4?
Thanks!

I am using photoshop CS6, but I was also running CS6 on my last iMac and
the contact sheet worked with no problem. I can get contact sheet to work
through Bridge but not photoshop, it's very frustrating.
On Tue, Sep 9, 2014 at 8:29 AM, Lauren Parsells <[email protected]>

How to decrypt data when you can't get the private key in Windows?

I'm very confuse. My english is poor, but I try to say my question clearly.
When browser connects to a https website which needs client certificate to authenticate the identity, the browser will send client certificate to web server.
Then the web server will use the certificate to encrypt some data and send it to browser.
Then broswer should have private key to decrypt that.
But as I know, if I install a pfx format personal certificate, I can set can't export private key, which means you can't get the private key to use it. So how can
the browser decrypt the data without private key?
By the way, what is CSP, use CSP's interface can we use CryptoAPI
to decrypt data without private key?

Answer for question is "you cant"..
"How to decrypt data when you can't get the private key in Windows?"
Read more
http://msdn.microsoft.com/en-us/library/windows/desktop/aa387460(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/bb427432(v=vs.85).aspx
http://technet.microsoft.com/en-us/library/dd277320.aspx
http://en.wikipedia.org/wiki/Public-key_cryptography

I bought an application in itunes. When i opened the application, it asked me the access key that was sent throught my email address. But when i open my email address, there was no message from apple. how was that? where can i get the access key?

i bought an application in itunes. When i opened the application, it asked me the access key that was sent throught my email address. But when i open my email address, there was no message from apple. how was that? where can i get the access key?

Apple doesn't send access keys for apps. Which app was this?

A friend send me a gift from itunes, i fortgot my key to discharge the gift (song). Please how can I get my discharge key again?

A friend send me a gift from itunes, i fortgot my key to discharge the gift (song). Please how can I get my discharge key again?

a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

HT2240 i already bought a quicktime pro version but lost the key some how. how can i get back that key, without buying a new one?

i already bought a quicktime pro version but lost the key some how. how can i get back that key, without buying a new one?

thank you Malcolm J. Rayfield for your replay. but this didn't help, because i bought the "pro" bevore that.

Can Safari create a hot key about "Merge All Windows"?

Well, I am now using Safari for Windows Public Beta, and it is really a fantastic browser. But there is one thing that I am not satisfied with. Although I set "open in new tabs in the same window" in the preference, when I click a link, the browser does not open a new table in the same window, like the Firefox does. So I have to select the "Merge All Windows" item , which has not a hot key. Is it a bug of the browser？ Or can Apple set a hot key to this function?

At the moment, there's no hotkey for this function, but you can make a feature request at bugreport.apple.com

[ID 365563 daemon.error] can't get stderr port: Cannot assign requested add

Hello friends, i m getting the messages bellow in error logs, please suggest me what i have to do
" [ID 365563 daemon.error] can't get stderr port: Cannot assign requested add"

Hi Tom,
     Thanks, but at this point, I've rebooted, checked and double-checked more times than I'd care to count...:(
     Since I can see the NMEA strings when the GPS module is hooked-up to the USB port, I guess I'll assume there's some reason why the
     AMA0 UART has not been released, or that the GPS receives some different signals through the TTY that it's not seeing through the AMA0.
      As I mentioned, when I use 'cat /dev/ttyAMA0', it just hangs, like it's getting no data. I'll keep looking...
     Thanks for your help,
          Dave

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
currently I am trying to verify how many users Lines are missing , Emp numbers , Phones from AD with HR list available to me.
I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
any’twhenCreatedtAcctEnabled’tGroups
Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
Can you modify this script to help me out :)
Hi,
Depending on what attributes you want.
Import-Module ActiveDirectory
#From a txt file
$USERS = Get-Content C:\Temp\USER-LIST.txt
$USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
#or from a csv file
$USERS = Import-CSV C:\Temp\USER-LIST.csv
$USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
Regards,
Dear
Gautam Ji<abbr class="affil"></abbr>
Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
| Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blue yonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.

Hot key assignment for exposure control

Hi
I'm running 100s - 1000's of sequentially exposed images in LR and as a finishing step I'm ajusting exposure (+/_ 1/3 step) to various images in the quick develop module. Can I assign hot keys to these controls? Do they aready exist?
Thanks!

I can't find standard key shortcuts that work in Quick Develop. But if you go into Develop and click on the word "Exposure" in the Basic panel, you can then use the + and - keys to adjust Exposure in small increments, and shift/+ and shift/- to use larger increments, then use the right arrow key to move to the next image - so the Exposure slider retains the keyboard focus. The . (dot) and , (comma) keys step this keyboard focus up and down through the various sliders.
Or, if you specifically want to use Quick Develop for its relative adjustment behaviour (for example, across several images highlighted) you might check out something like this:
http://photographers-toolbox.com/products/keyboardtamer.php
or there's one called RPG Keys with the option of a separate keypad or similar (though I don't know whether either meets your specific requirement)
or more radically, this:
https://sites.google.com/site/dorfl68/

How Can you get your hot mail.

How can I use mail on my Mac to get my hot mail like i did with outlook on my PC.?
Mac Minni Mac OS X (10.4.7)

Hello,
If you want to use MSN / Hotmail with Apple's mail, check out the program HTTPMail Plugin at:
http://www.automagic-software.com/downloads.php
You can also download it from SourceForge:
http://sourceforge.net/projects/httpmail-plugin
And, strangely, while both the developer's site and SourceForge lists the latest version as 1.47 - Tiger release 2005-11-25, I found a 1.48 release at:
http://mac.softpedia.com/get/Internet-Utilities/httpmail-plugin.shtml
And also:
http://www.macupdate.com/info.php/id/10842
And also:
http://www.versiontracker.com/dyn/moreinfo/macosx/18189
I just downloaded the 1.48 version, and it is in-fact a 1.48 release. So, that would appear to be the most current version. Perhaps the normal / direct sites just haven't been updated yet.
You can see a screen-shot and brief description of the older 1.46 version at:
http://www.apple.com/downloads/macosx/email_chat/danielshttpmailplugin.html
The 1.47 version of the httpmail plug-in was released in November of 2005. But, the 1.48 version was apparently released in March of 2006.
It is not a "universal binary". It is a PowerPC only program / plug-in.
This is not an issue if you are using a PowerPC Mac. You can just install it and use it.
As for Intel Macs, it will install, but not run in a Intel Native program.
If you want to use a PowerPC plug-in with Mail on an Intel Mac, then you have to set Mail to run in PowerPC mode through Rosetta.
That will enable the plug-in to work. But, that means running mail through Rosetta which may be slower.
Just to be safe, you might actually want to set mail to run in Rosetta before you install the plug-in. That would probably be the safest route.
Here's a document about forcing a program to run in Rosetta.
http://docs.info.apple.com/article.html?artnum=303120
Give this a try and see if it works for you.
Hope this helps.

How do you get the hot keys / keyboard shortcuts to work?

I have the free trial version of Photoshop. I am new to Photoshop, I am just starting to learn how to use it. I notice that some of the shortcuts/hot keys don't work.
For example, one basic hot key that does not work is the F7-key. The F7-key opens and closes the layers palette.
Another hot key that does not work is the spacebar. My teacher taught me to hold the spacebar down when you want to move the canvas around. When I am in handtool mode I hold the spacebar down, I then apply pressure on my laptops touchpad, I then slide my finger across my laptops touchpad in order to try and move the canvas, but the canvas does not budge.
Some shortcuts work. For example, tapping the F-key multiple times will expand and reduce the size of Photoshop.
Closing my web browser did not resolve the problem. Updating the software did not resolve the problem.
I am eager to learn Photoshop, but it's hard, and probrably a waste of time, to try and learn Photoshop when some of the softwares hot keys don't work. Anyone have a solution they can offer?
Thank you,
Jennifer
Toshiba X75 / Windows 8 / i7-4700MQ / GeForce GTX770M / 32GB RAM

hello.. i want to ask your something about your laptop... i am actually planing to buy new laptop.Toshiba X75 or MSI GS70 .. i am not gammer. never play game on laptop last 6 years... my laptop 24hrs on.. and i do design... so how is your Toshiba X75 performance for designing.. i read on internet. Toshiba X75 have overheating problem.. but the people complain most of them gammer... as i don't play game on laptop.. will i face same thing ?

How can we get the Latest Resource Assigned in the Approval Form

I was wondering if there is any way to get the Latest Assigned Resources to a User in my Approval Form.
I tried this <ref>waveset.resourceAssignments</ref> but it returned all the Resources assigned to a User. While creating a User with Resource Assigned it won�t be problem. While Update when a User is assigned a Resource & it comes for Approval to the owner, all the Previously assigned resources shows up. How can I get only the Latest Resource Assigned.
Can anyone provide some hints on this..

idm_guy, if you could elaborate more on what you mean with latest resource assigned it would help - but there are a number of options (if i interprent you correctly to solvethis). My guess is that the easiest way would be to determine if:
waveset.accounts[<iterate through resources>].created = true or false
and if
waveset.accounts[<resource>].lastPasswordUpdate = <last updated date>
The latter is of course only applicable to resource where you set a password. This value will be updated whenever you set the password and could be a possible value to check against.
If the account is not created yet but assigned it might be another possibility to check, but again - clairfy a bit about what you mean with "Latest Resource Assigned".
/Anders

Ethernet card issue...can't get rid of self-assigned IP

Hi folks,
I am using an circa 2005 iMac G5 PPC desktop with 10.5.8. I am trying to connect the iMac to my Time Capsule via ethernet cable, but seem to be having problems with my ethernet card. When I plug into the TC ethernet port, the TC drive, does not mount and I cannot access the worldwide web.
When I go to System Preferences --> Networking, the tab on the left for ethernet connection shows a green dot, says "self-assigned IP" and the status says "connected" PRIOR TO CONNECTING THE ETHERNET CABLE TO THE TIME CAPSULE. It shows a "self-assigned" IP (DHCP selected) of 169.254.69.249, even though I know my TC is 10.0.1.1. Turning the ethernet off then back on, renewing the DHCP lease, nothing seems to be able to make this 169 IP address go away. The wireless connection to the TC is just fine... everything does what it should, I just can't get the ethernet cable connection to work.
Out of curriosity, I went to the System Profiler, and on the network tab it shows ethernet IPv4 169.254.69.249 (name en0).
I know it's not the Time Capsule, as I connected my laptop to it just fine via ethernet. The TC was IP 10.0.1.1 and it assigned 10.0.1.5 to my laptop (I have a variety of devices on my network), and I was able to transfer data and access the internet with no issues whatsoever.
I live in an 32 story apartment with a built-in ethernet network and ISP included in my rent. It's pretty nice, high speed. I connect from the wall to the Time Capsule via ethernet (circle dot connection port, so I know I have the right port), and then wirelessly out to a couple of laptops, a couple of Airport Express, and of course my desktop.
Bottom line, I think the ethernet card on iMac G5 desktop has gone bad: A few questions:
(1) Any ideas what may be wrong? Has anyone seen this self-assigned IP thing that won't go away?
(2) Any ideas how to fix it?
(3) How much will it cost? It may be time to replace my 6-year old desk top computer.
Thanks, Andy

I've swapped out several cables still with no luck, and the current cable definitely has 8 pins and worked with my laptop, so I'm confident it's not the cable. Also, the Time Capsule seems to be OK, because it too worked with my laptop using the same port. The only variable that doesn't seem to be cooperating is my desktop computer.
Also, I have tried to manually assign an IP consistent with the network & appropriate subnet mask. It seems to take the IP address manually, but still I can't get internet access, and can't ping the Time Capsule in network utility either.
Finally, when I connect the desktop directly to my wall outlet, taking the router out of the equation entirely, network diagnostics shows ethernet failure...
Does that sound like a bad ethernet card?
What does it take to replace an ethernet card in an iMac G5?
Cheers, Thanks, Andy

Can't get a hot-key assigned to a Mail submenu

Similar Messages

Maybe you are looking for