Can't get a internet lease. Dhcpcd and manual

After two different problems with my wireless card i have finally almost gotten it to work. I am capable of connecting to my router, but every time i run dhcpcd eth1 it times out at broadcasting for a lease
rc.conf Network part
eth1="dhcp"
eth0="dhcp"
interfaces=(eth1 eth0)
gateway="default gw 192.168.2.1"
ROUTES=(gateway)
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11bg ESSID:"sputnik"
Mode:Managed Frequency:2.457 Acces Point:00:25:3C:**:56:** (stars are to hide what i think is mac address...)
Bit Rate:54Mb/s Tx-Power=20 dBm Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Encryption key:yadda yadda yadda Security mode:open
Power Management:off
Link Quality=86/100 Signal level=-44 dBm Noise level=-85 dBm
Rx invalid nwid:0 Rx invalid crypt:1443 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Miseed beacon:8
I've also tried the
ifconfig wlan0 192.168.0.2
route add default gw 192.168.0.1
example from https://wiki.archlinux.org/index.php/Wi … nual_setup but after when i ping google i get unknown host. So maybe im just missing a step. Also if you need any command outputs just ask and i'll respond once i notice.
Last edited by Foxhead (2010-12-28 07:36:36)

Hi,
Just after a quick read:
gateway="default gw 192.168.2.1"
and
ifconfig wlan0 192.168.0.2
Check - perhaps it can help - the two last entries in the IP addresses. As an example 192.168.1.2 and 192.168.2.1 may not be able to "see" each other...one of the two needs to be changed...the choice is yours
Had the same with a print server, it came with IP address 192.168.0.1, my LAN is at 192.168.1.x, noticed the diffrerence?
Possibly a networking thing...
Wellness
Thor
Last edited by Thor@Flanders (2010-12-28 13:42:02)

Similar Messages

  • How can I get safe internet for protect my phone and PC

    How can I get safe internet for protect my phone and PC. l lose all internet account I've three year. i lose my phone all app for a day even I safe all informating and apps in ICloud  but I lose all my phone information . Like I have new phone and I do not have all my date . For new phone i can not use over 10 apps for my phone

    You can't. But if you backed up your computer prior to wiping it out, you should be able to restore your iTunes library, contacts, photos, etc. from that backup. Once you do, you can set the phone up again and just sync everything from your library back to it.
    If you didn't back the computer up either, you can transfer items purchased on the phone into iTunes, and if you set up at least one contact in whatever application you sync your contacts to on the computer, it will offer to merge the address books on the first sync, saving those.  Any media you'd acquired from sources other than the iTunes store will have to be re-downloaded from the source or re-ripped.
    The iPhone is NOT a backup device.

  • Can I get an Ipad with wifi and cellular but no contract with a carrier in the US?  I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

    Can I get an Ipad with wifi and cellular but no contract with a carrier in the US?  I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet. 

    Yes you can.  All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries

  • IPad 2 and iPhone 4 - can't get an internet connection while tethered

    I have an iPad 2 and an iPhone 4. Been using the iPhone to tether my iPad for a few weeks and all of a sudden when it's tethered I can't get an internet connection. Both iPhone and iPad are updated with latest software.

    Hello Emma I presume your in the UK.
    In the UK PPPoA is the standard PPPoE is not supported by many ISP's.
    On your Mac just use DHCP in your Network settings. Do not use PPPoE.
    Then login to your router's web configuration page. http://192.168.0.1 or http://192.168.1.1. Admin and Password are the usual login details for netgear routers.
    use the following details
    PPPoA
    VC-Mux
    Chap authentication
    vpi and vci are 38,0
    and of course use your isp username and password.
    Post edited. I just noticed you had already figured out the correct details.
    Message was edited by: Tim Haigh

  • Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV

    Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV. Whenever I try to put my info in it says to try later. When I test network it says network time has not been set. It has worked previously.

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • Can we get satellite internet on ipod 4th generation?

    can we get satellite internet on ipod 4th generation?

    What happens when you try?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • I can't get the internet to work on my blackberry

    I got my new blackberry today after my previous one had software problems and even with the same contract i can't get my internet to work, its says "This is a wif-fi service.please ensure your device has an active wi-fi connection and try again." After checking the "manage connections" option it said my wif-fi was on but instead of having the usual tick it had this symbol "-" Can anyone guide me in the way to fix this?

    You need to call Orange and ask them to make certain that your BlackBerry Data plan is on your account.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need to reinstall, but can't get on internet to try.....

    I click on Mozilla icon to get on internet, and i get this error message:
    XUL Runner: Error Platform 1.9.2.12 is not compatible 1.9.2.13....
    I googled a fix, and it says to reinstall Mozilla, and it should be fine...
    Only problem is that i don't have IE, and Mozilla was the only way i was able to get online. If I can't get on internet to go to site to do the fix, is there any other way i can do this?
    Pleaseeeee help :)

    Can anyone please reply from support team? I'm still having the above issue - thanks :)

  • Can´t get mobile internet function on ZTE OPEN C

    Wi-fi functions fine. But I can´t get mobile internet running. My provider gave me following settings:
    Internet
    APN: Click
    IP Address: assigned by the network
    DNS 1 Adresse: 213.055.128.001
    DNS 2 Adresse: 213.055.128.002
    Benutzername: -
    Passwort: -
    Proxy: deactivated
    But there are not such fields in data settings. There is only APN, Identifier, Password, HTTP proxy host/port and authentication.
    Thank you for your advice
    regards
    JL

    hi JL,
    I would try putting click in as the APN in Settings > Cellular & Data > Data Settings and also in A-GPS settings under APN. Then enable the Data connection. Otherwise I might also try gprs.swisscom.ch or internet as the APN.
    thanks!Michelle

  • I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

    I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

    You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

  • My ipod reset itself it would not let me log into my old itunes account so  I made a new one how can I get to all my music and stuff.

    My ipod reset itself it would not let me log into my old itunes account so  I made a new one how can I get to all my music and stuff.

    To recovery yoyr existing account:
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
    If necessary:
    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

  • I was trying to sync my 120GB iPod Classic earlier and it said it couldn't sync as the iPod disk could not be "read" or "written to". I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location.  Select the location of your on external hard drive. 

  • I have an ipod nano 4th generation.  I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano.  How can I get rid of his shuffle and re-add my nano

    have an ipod nano 4th generation.  I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano.  How can I get rid of his shuffle and re-add my nano?

    Hi lundjj,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting steps in this article helpful if your iPod nano does not appear in iTunes:
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    This information can also help if you are using multiple devices with a computer:
    iPod for Windows: Connecting multiple iPod devices to iTunes
    http://support.apple.com/kb/ht3622
    Although FireWire and USB connections will allow multiple iPod devices to be connected to the computer at the same time, iTunes for Windows works best with only one iPod connected at a time. If you plan to connect multiple iPod devices to the same computer, eject any iPod devices that you are not using from iTunes.
    All the best,
    Jeremy

  • My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk.
    http://support.apple.com/kb/PH5836
    Reset PRAM.
       http://support.apple.com/kb/PH14222

  • How can i get best practice for SD and MM

    Please, can any body tell me how can i get best practices for SD and MM for functional approach?
    Thanks
    Utpal

    Hello Utpal,
    I am really surprised, in just 10 minutes you searched that site and found it not useful. <b>Check out my previous reply "you will not find screen shot in this but you can add it in this"</b>
    You will not find readymade document, you need to add this as per your requirement.
    btw, the following link gives you some more link for new SAP guys, this will be helpful. <b>Check out HOW to BASIC transaction</b>
    New to Materials Management / Warehouse Management?
    Hope this helps.
    Regards
    Arif Mansuri

Maybe you are looking for

  • How do I pass a null value to the reportDocument?

    I'm using CR 2008 and VS 2005.  I am using a stored procedure as the datasource for one of my report, which we run using the C# API.   The stored procedure is expecting a NULL in certain cases and I find I cannot pass a NULL with my current code: //

  • Exception in thread "main" java.lang.NoClassDefFoundError: java/sql/Savepoi

    I am getting the following exception described below: Exception in thread "main" java.lang.NoClassDefFoundError: java/sql/Savepoint at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java, Compiled C

  • Color is weird with DirectX rendering in acrobat 3D

    Hi all,    I am trying to use 3D capture tool to get the model from another program into acrobat pro extended. Importantly, I would like the color to transfer to acrobat too. The 3D capture tool does transfer the geometry well but the color looks ver

  • Developing custom translator for converting xml to edi

    Hi Gurus, I am trying to justify using Oracle B2B if my only requirement is to be able to translate data from flat files to EDI and vice versa. My use case is Application Data ------------> ESB ---------------------------------------> Custom Translat

  • Problem with EP 7.0 insatllation

    Hi ALL, 1)     Our servers are IBM AIX 6.1 and P6 570 2)     Now I must install EP 7.0. 3)     What is my problem I am not having any experience in UNIX platform till now. But now I must install EP 7.0 on operating system AIX 6.1 4)     Can any one h