Can't get a network aggregate/bond to work properly

*I am trying to accomplish network teaming in the Windows world*
I have my Mac Pro wired with two Ethernet cables to my Time Capsule. In Network preferences I show Ethernet 1 and Ethernet 2 connected. I go and create a new aggregate called "Bond1" and select both interfaces. The two existing connections are disabled, but the Bond1 never acquires an IP address. I am going directly to my Time Capsule with both cables.
I want to have both interfaces going inbound and outbound. What am I missing? I assume the Time Capsule supports aggregating, teaming, trunking, etc. Whatever the term of the week is.
Hope I'm not all confused on what's doable and not doable.
If I can't team the interfaces, I guess the only other valid option would be to setup one for Time Capsule backups and the other for Internet access, but something tells me that won't work either.
Thanks and hope everyone had a good Christmas!
Jason

Dont waste your time with this.
Willam is right - you need a switch, which supports bonding.
But, even I you go an buy a $200 Gigabit switch which will support this, you most likely will not see any difference compared to a single Gigabit link (at least not, if you connect this to a Time Capsule).

Similar Messages

  • How can I get the CC desktop app to work properly?

    Hi,
    I purchased a subscription and now I'm trying to install Adobe CC applications on my computer.
    Unfortunately NOTHING is working the way it should…
    I have tried calling support but they haven't called me back anymore.
    Today I finally managed to get the Creative Cloud Desktop app installed, but it keeps giving me this message:
    "The Creative Cloud installation is no longer functioning, please uninstall and download again from…"
    I think I have tried all suggestions I found; uninstalling the app, repairing disk permissions, shutting down and starting up again, using the cleaner tool, renaming the OOBE folder in my Library… All steps in all order and with a restart and repairing disk permissions in between.
    Also I followed all steps mentioned here: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    The only thing I can think of that didn't go as described is the verification of the Cleaner Tool, also no log file is created.
    - When you see the message "Adobe Creative Cloud Cleaner Tool completed successfully," click Quit and restart your computer. 
    - In a text editor, such as TextEdit, open /Users/[user name]/Adobe Creative Cloud Cleaner Tool.log.
    I'm not sure what else there could be, is there anyone that has had similar problems and found a way around it?
    All help is appreciated
    By the way, my MacBook Pro 13" Retina is running OSX 10.9.5 on a 2.4 GHz Intel Core i5 with 16 GB or RAM. All CS6 apps have been working without many problems…

    Try to follow below steps
    Click on Finder and then hold Command + Shift + G keys on your keypad
    It will open Go to folder window, type  exactly ~/Library and click on Go
    Then open Application Support > Adobe folders
    Trash AAMUpdater and OOBE folders.
    Now click on finder and hold Command + Shift + G keys on your keypad.
    This time type /Library and click on Go.
    Make sure to remove ~ symbol.
    Then open Application Support > Adobe folders.
    Trash AAMUpdater, Adobe Application manager, OOBE folders.
    Now Click on Finder and then hold Command + Shift + U keys on your keypad.
    It will open utilities folder.
    Trash Adobe Creative Cloud and Adobe Application Manager folders
    Download and Run CC cleaner tool from below link
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
    Accept the license agreement and click on Adobe Application Manager
    Then click on clean up selected
    Close the window
    Download and install Creative Cloud App from below link
    Free Creative Cloud | Download Adobe Creative Cloud free trial

  • How can I get help with an app not working properly?

    I just bought a 'learn Gujarati' app and the sound is so low I can hardly hear it even with the sound control on the iPad turned up as high as it would go. I have only had the iPad a few months - present from children, and I LOVE it and want to make most of it, thanks, Chrissy

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • T42 HD replaced, can't get restore and recovery disc to work properly

    Hello Support Team!
    I purchased a ThinkPad from a company going out of business and was happy with it until the hard drive started to freak out.  I replaced the hard drive with a new Western Digital 250 GB and ordered the recovery discs from the place in Atlanta.  The discs arrived and I thought I was ready for my new computer.  I'm following all the directions in the install, changing the startup to boot from the CD.  I get the Recovery Welcome Screen and try to click on Restore Factory Settings.  At this point, I get a screen that says "In order to proceed, your system must be rebooted".  I haven't gotten past this point now matter what I try. 
    I like this little machine, but I'm afraid I can no longer breathe new life into it????
    Do you have any suggestions?
    Thanks!
    slhackett
    Solved!
    Go to Solution.

    OK, that's a good start.
    Have you wiped the drive before attempting to install the OS? If not, now would be a good time to do it.
    Download the PC Doctor for DOS bootable CD, burn a disk and boot from it.
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/1ety48ww.exe
    Wipe the drive clean (under utilities), run diagnostics on the rest of the system.
    If everything comes back clean, re-try installing the OS.
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Using windows vista I can not get the install to complete and work properly with a usb connection.

    I am running Vista (32 bit) and I was trying to update to new HP software.  Tried using full software install from file on HP website (release 14.0 full version).  When I try to install, it will not recognize the usb connection of the software.  I tried going back to version that came with the printer and had a similar problem.  Now I am stuck not being able to get either version 12 (which came with the system) or version 14 (new update on website).
    I need help trying to figure out how to get the software to go through and connect properly using usb and having the scan function working.......
    Any ideas.

    Hi,
    Have you tried plugging the USB into a differnt port at the back of your PC?
    IS the USB directly connected to your PC and not through any USB hub or extention?
    Do you see any response while plugging the USB to your computer?
    If yes, please clarify.
    I would also suggest trying a different USB cord, not longer than 2-3 meters long and check for any difference.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • [Solved] Can't get gnome network manager running

    Alright this one is a head scratcher.  I've folowed the wiki for network manager to a T except I can't get the network manager icon to show up (I have notification addon already running).  I don't have any network loss though.
    Here's my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="no"
    TIMEZONE="Canada/Pacific"
    KEYMAP="dvorak/dvorak"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(powernow-k8 cpufreq_ondemand cpufreq_powersave forcedeth snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="myhost"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    eth0="dhcp"
    INTERFACES=(lo !eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng !network netfs crond laptop-mode dhcdbd networkmanager @alsa @hal @fam @gdm)
    Last edited by dr/owned (2009-01-09 05:16:43)

    I assume you're running nm-applet --sm-disable once you get a window manager session up?
    Try starting networkmanager after hal. From the wiki:
    You must also "disable" the default network daemon, and add the hal, dhcdbd and networkmanager daemons in this order:
    DAEMONS=( ... !network hal dhcdbd networkmanager ... )

  • Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

    Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
    Airport gets it address DHCP.

    Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
    When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
    Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
    Note that the Express will not provide any additional wireless coverage when it "Joins".

  • Can't get my iTunes gift card to work.

    Hey
    I can't get my iTunes Gift card to work I got the first part right but when I need the serial number it wouldn't work I entered it right everytime but still wouldn't work so I got out of the page and started again and I entered the Activate Numbers and it said that the card hasn't properly been activate seek help.... What do I do?

    If the error message you are receiving is that your iTunes Gift Card in inactive, you should contact iTunes Store Customer Support via the Contact Support link on the lower-left side of the iTunes support page and include attached digital photos or scanned images of the sales receipt and both sides of the gift card.

  • How can I get my hp Laserjet 1012 to work with Windows 7?

    How can I get my hp Laserjet 1012 to work with Windows 7?

    Here is a list of products that are not supported in the win7 OS. This product is listed there.
    Products not supported in win7
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • How can I get an HP Deskjet 3050 to work on a macbook air OS 10.9

    How can I get an HP Deskjet 3050 to work on a macbook air OS Maverick 10.9.5?

    Ok here is a good link Re: how do i setup/connect to my wireless printer I assume the printer is wirless if so this should work. First turn the printer on then go into system preferences and then printers and scanners. It should look for the printer that is on the same wifi as you and then just set it up.

  • I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

    I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

    It actually sounds like the warp text window is opening off screen.
    Resetting the photoshop elements 10 preferences should fix it.
    *Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
    *Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
    *Press Yes

  • HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

    I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

    Not sure if this will help anyone, but I had trouble installing on 10.8.
    I then found this particular support page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
    Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
    I use the printer through usb but my wife uses wireless from her PC laptop.
    Andre Francis

  • I can't get my HP laserjet p1102w to work with airprint

    Hi!
    So it seem's that I can't get my HP laserjet p1102w to work with airprint. I got it to send out it's own Wi-Fi signal, and i get in touch with that signal on my iPad 3. But when I wan't to print something out from Pages, then it says that it can't find any airprinters.
    I tried to update the firmware several times, but it still doesn't work. Any suggestions to what I can do?

    Hey T-racer,
    As a work-around you can also use the HP eprint method which is available with your printer. The application (HP Home & Biz) is available for free in the apple catalogue.
    You can find more info on it here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128518&cc=us&dlc=en&lc=en &product=4110396&tmp_track_link=ot_search
    It shares many of the same capabilities of airprint but is a different program/feature.
    If you have any questions, just ask!
    I work with HP.

  • I have a new Bose sounddock with a lightning connector, but my iPod has the old style connector. Can I get an adapter to make them work together?

    I have a new Bose sound dock with a lightning connector but my iPod has the old style connector
    Can I get an adapter to make them work together?

    Alternatively...
    is this what you're after?
    If so, have a look here: http://www.amazon.co.uk/Lightning-female-30-pin-Dock-Cable-Adapter/dp/B00DZN3GZK /ref=pd_sim_sbs_ce_1
    or this one...
    http://www.amazon.co.uk/SANDBERG-440-45-Adaptor-Lightning-Connector/dp/B009KZZ3L C/ref=sr_1_16?ie=UTF8&qid=1382801610&sr=8-16&keywords=30+pin+to+lightning+adapto r
    Or google "lightning female to 30-pin dock male cable adaptor". The cruicial part is female lightning to male 30-pin ends.
    The Apple cable is a female 30-pin to male lightning end.

  • Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    I was out of town for a few days. I had no issue installing the driver on Mountain Lion (10.8.2). What specifically happens when you try to install?
    If you get this message:
    then you need to right-click on the installer package and select 'Open' when you get this message:
    If this isn't your issue you need to be more specific about what is happening.

Maybe you are looking for