Can't get a wireless connection on a T43 when using Access Connection​s

This week I had to set up a laptop for one of the partners of our firm.  Since I can no longer use System Update to get all the lenovo apps I had to download everything from the website.  Everything seemed to be going fine until I noticed that the wireless card wasn't connecting through Access connections.   It only works through Windows connection utility I have the latest version of Access Connections and the correct driver for the wireless card but it just won't work.  I remember that when system update was up and running I could download a seperate driver from lenovo that would make the wireless card work with Access Connections.  Unfortunately, I can't find it on the website.  Can anyone help me?

Hello eaglesfan20, welcome to Lenovo forums!
Please tell us your system type, OS and used AC version.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
 English Community       Deutsche Community       Comunidad en Español

Similar Messages

  • New Netgear Router and now I can't get a wireless connection for my K5400 printer.

    I got a new Netgear Router and now I can't get a wireless connection on my Officejet Pro K5400 printer. Anyone know what I can do to fix this. Using Windows XP

    On the printer: Setup > Network > Restore Defaults.  From the same Network menu, run the Wireless Setup Wizard.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

    I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

    Thanks for your note. My tech dept could not come up with any explanation for the dictation tool not working. We have about 1,000 employees in our office - I think I will send an all employee message to see if anyone else has the issue.

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • My antenna signal is very weak and I have the iOS 6.1 I CAN´T GET THE WIRELESS CONNECTION

    my antenna signal is very weak and I have the iOS 6.1 I CAN´T GET THE WIRELESS CONNECTION

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • How can i get rid of the print dialog box when using api to print an html file

    i am using the systemshell.vi provided by labview the VI is working fine but it will open a dialog box for printer selection and properties. i would like to hide that dialog box and have it print to the default printer with the default properties

    ShellExec is part of lvwutil and merely calls a function in Shell32.dll. There is nothing about the function call that controls the display of the printer dialog. I think that what shell32.dll does when it prints (just like right clicking on the file) is print the file according to what is defined about that file type in Windows Folder Options. On my Win2K system, the print application is defined as "C:\Program Files\Microsoft Office\Office\msohtmed.exe" /p %1. If I remove the /p, then Word starts up and in order to print, I get a printer dialog when choosing Print from the File menu. So it seems like the printer dialog is entirely dependant on the application that does the printing. I get no dialog when I use the VI to print a .txt file. I
    nstead of using shell32, you might want to try some ActiveX method or property of an application like Internet Explorer that can open and print an html file.

  • I downloaded the latest upgrade and I still can't get my wireless to connect.  I have restored factory settings.

    I loaded the 8.1.1 upgrade to my iPad 2 and I still can't get the wireless in my home or elsewhere to connect.  I have reset factory settings to no avail.  It doesn't even recognize the network in my house.  Using my Verizon data as the sole source for now, which costs $$$.  The machine has not worked well since 8.0 upgrade.  Any thoughts?

    Try the following:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings
    3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

  • HT5628 I've downloaded bootcamp 5 to run windows 7 but I can't get a wireless internet connection. Does anyone know how to fix this?

    I've downloade bootcamp 5 to run windows 7 but i can't get the wireless internet to work. It does not seem to recognise it. Without the use of the internet the software that i want to install i.e sage instant accounts will be useless. Can anyone help please? i also have a problem of ejecting the cd disc. i press the normal eject button and nothing happens. The only way i could eject the windows 7 disc was to toggle to the mac side of the computer and it would eject from there. Does anyone know how to do this from the windows side?

    You have not installed the Boot Camp drivers.
    Start up in OS X and download the Windows support software from this site > http://support.apple.com/kb/dl1638 Follow the steps of the link except the ones to install Windows.
    Then, start up in Windows and install the Windows support software

  • I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

    I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
    Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
    Please anybody out there that can help!!!??

    Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

  • Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

    Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • Bought New Extreme, works great with Macs but can't get PC to connect

    I just bought a new Airport Extreme this weekend. As promised it was a breeze to set up and things were working well until I tried to connect my TIVO and my work laptop (Windows) to the network I set up. I can't get either to connect to either the base network or the guest network with any level of security set on it. My only success has been to configure the Guest Network without security on it (but I don't like that idea).
    Please help.

    I don't see "Equivalent Network Password" as a selection on the Base Network screen (or any of them for that matter).
    Isn't this the password for my base station and not the wireless network? Maybe that is my problem. I am trying to connect to the network and not the Base Station? I am getting confused. What I really need to do is connect my work laptop (Windows based machine) and my TIVO to the wireless network I've created (Radio Mode selected to Automatic, Channel Selection to Automatic, Security set to WPA/WPA2 Personal).

  • Can't get printer to connect to computers

    I have an HP Photosmart 5512 all-in-one printer and I"m trying to get it to connnect to my computers in my home. I have a HP 2000 laptop running windows 7. I have tried all the trouble shooting software the company provides, I have unplugged and waited on router and printer. I uninstalled and reinstalled software on computer and printer. I have tried everything the company site has to offer to get this printer connected. I have even called the customer support and they won't help me even though I"m using their products, because its been a couple of years. So if there are any techs on here who know anything about this, please help.  I'm about ready to throw it out the window. Its new, I only used it once a couple of years ago and put it back in the box. Now I need it for college and I can't get it to connect. Help Please.

    Make and model number of modem?
    Make and model number of router?
    Computers connected via wire or wireless?
    OS of computers?
    Please detail all steps you have done to troubleshoot the issue. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Problem getting a wireless connection to HP iPAQ h5455

    Problem getting a wireless connection to HP iPAQ h5455.  This unit is small hand held device simlar to a PDA.  I has both wireless and bluetooth access.
    I get a connection to the modem but I can not connect to the internet.
    I have verified the connection by ping and using the information provided on one of the h5455 status page.
    I believe the problem I can not find anywhere to enter in my user id and password to get access to my dsl account.
    Do I really need to enter in my user id and password to make a connection for the internet?
    I have 3 other computer in my home network, 2 hardwired and 1 wireless.  All of them can connect and go online with no problems.

    #1 What is the brand and model of your router?
    #2 What is the brand and model of your modem?
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Hey my brother just got an ipod touch and i can't get it to connect to itunes what to i do he's really excited HELP!! :)

    hey my lil brother just got an ipod touch and its saying connect to itunes and its plugged into my computer and im at the itunes website but i can't get it to connect can anyone HELP ME??!! my mom said that she wants his ipod to be connected so that its on my itunes account so i can see if he buys anything.
                                       PLEASE HELP ME !!!
    ~Maddie

    iOS: Device not recognized in iTunes for Windows
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar

  • Just brought home my IPad. I have the MIFI on and it is bringing in a signal to my IMAC but I can't get it to connect to my IPad. Any suggestions?

    I just brought my IPad home but can't get it to connect to my MIFI. The MIFI is on and working as it's sending a signal to my IMac. How do I get it to recognize the MIFI so I can go online with my IPad?

    Does your iPad see you network?  If no, are you broadcasting its SSID?

Maybe you are looking for

  • NAT for remote access VPN clients

    Hello, I have a simple remote access VPN setup on a 2811 router. The remote subnet of the clients connecting have access to the local LAN subnet, but I am wondering if it is possible to somehow NAT those remote access users, so that they can go beyon

  • Itunes says memory on ipod is full but is actually empty

    Hi, I hope someone can help me with this: I recently downloaded itunes 7 as recommended for my Ipod Nano 2nd generation, my ipod is showing, but when i try to sync my library with my ipod it tells me there is not enough space to do this, the memory b

  • 2.2 Upgrade Causes Buzzing

    You know when your phone is close to a speaker, alarm clock, etc. and you hear that buzz noise just before you receive a call and your phone rings. Well ... the 2.2 upgrade has caused my phone to do that same thing through my headphones (comes throug

  • How can I browse my icloud data

    Is there any way to have a look into the icloud; e.g. my icloud ? Maybe there is an application ?? Thanks in advance for answering

  • Can servlets/ jsp automatically run perl scripts and executables?

    I'm a student and am new to to servlets and web programming in general. I need to know if it's possible to run perl scripts and executables automatically from servlets/ jsp. The program I am planning on creating should have a client outside a firewal