Can't get ac3 sound to work

I have rent a movie and cannot get ac3 to work properly.
I have rent movies before so it's nothing wrong whit my computer. But this time I can't get any sound at all is it to do whit iTunes update I am running the last update for iTunes.

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

Similar Messages

I can't get any sound to work on my iPhone 4S unless I have the headphones plugged up. Help...

i can't get any sound to work on my iphone 4s unless the headphones are plugged up

http://support.apple.com/kb/TS2802

Help, please! i can not get the sound to work on my pc

i can not get the sound to work on my pc

Try opening the device manager and remove your sound hardware and then rediscover. This works often. Let me know how it goes.
iGirlTech

I can't get the sound to work

I just got the
HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work. I am using it with a HP Envy 23 inch monitor that also has Beats audio and an HDMI cord hookup. I have gone through all the steps on the monitor support page and the desktops support page. Any help out there? Thanks in advance.
This question was solved.
View Solution.

Hi,
No, this is not going to work, you can't hook the desktop to the AiO 23 and get sound from the AiO 23.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't get the sound to work on my 5th Gen iPod 30gig movies

For some reason, every movie that I have on my iPod, mainly music videos, have no sound. I just bought this iPod and I am still learning how to use it, however I cannot find anything in the forums to help me troubleshoot this problem. Can anyone give me any pointers on how to get my sound to work with my movies? Thanks

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

Can't get surround sound to work while default format is 96000Khz

Hello,
I finally figured out that for some reason I can play 5.1 surround sound if I choose the 24bit/48000Kh as the default format from the realtek manager, or for that matter from the Sound control panel. But if i choose the 24bit/96000Kh from the realtek sound manager I only get stereo sound when played either from WMP or WMC.
Does anyone know if this is a limitation of the sound card I have?
According to the spec's I should have the for the s3480a are:
Sound/Audio
High Definition 6-channel audio
ALC 888S chipset
Also, and maybe for another post, i bought HDMI cable because I have a TV Tuner card in this unit but I can't seem to get it to work...
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

I've seen similar OEM "configurations" with RealTek codecs and the sound hardware on the motherboard. I "think" channel limitations at higher Khs are either a real hardware/codec limitations or the folks that design the PC are safeguarding against problems that show up when multi-channel is enabled at higher Khs (power draw, popping noises, whatever).
This is total speculation on part.
I have seen cases where updating the sound codec using the latest drivers available from realtek.tw allows you to select from more hz and channel options. But keep in mind more problems might pop up if you select a hz range beyond 48Mhz.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

TS3274 Can not get my sound to work on games apps

Can anyone help. Cannot get any sound on my games apps, I think my son has had his hands on it again. It has happened once before but I can not remember how to switch it back on.
PLEASE HELP
THANKYOU
MIKE

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

I can't get any sound to work on my ipod touch

I cannot get any sound on my ipod touch. When I am listening to music the volume bar is not visible and when I am on my apps it says no volume available. Anybody have any suggestions on what I can do to fix this?

Here is what Apple Says: http://support.apple.com/kb/TS2771
No sound through internal speaker*
Verify that the iPod touch is not set to pause.
Verify that the volume is set appropriately.
Verify that headphones are not attached to the headphone port.
Verify that Bluetooth stereo headphones are not paired wirelessly.
Try turning the iPod touch off and then on again.
No sound through headphones*
Verify that there's no debris in the headphone port.
Plug and unplug the headphones. Reconnect headphones and verify the connector is pushed in all the way.
Check the volume setting on your iPod touch.
If you are trying to listen to music and cannot hear any audio, make sure that the music is not paused.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPod touch with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another set of Apple headphones.
Try a different song or video.
Check other content, such as videos, to see if they exhibit the same audio issues.

How can I get surround sound to work?

I have a new TouchSmart 520z. I believe it has an integrated soundcard. When I purchased it I was told that surround sound speakers would work. I purchased the Logitech 5.1 speaker system. I don't have any color coded RCA receptacles on the system. I have a mic and earphone receptacle on the left side and a sub and another receptacle just below it with a design on the rear that I am not sure of. I placed the green RCA plug in the bottom receptacle on the back and get sound out of the two front speakers and subwoofer. Don't know where to plug in the center and rear speaker plugs. I have a feeling that this system does not support surround sound. I configured my settings to surround sound 5.1. Need some help. Thanks.

Did some tests...
If I change the default audio device to the integrated audio device in the mainboard I get the same. Changing the bitrate in itunes or in the windows settings does not help either...
Anyone has a similar problem?
Or anyone has a similar setup and actually gets surround sound from itunes?
I rather keep renting and buying films through itunes and not switch to some other shop...

How can i get my sound to work?

When I get a phone call or message or talk to someone, I cant hear anything. Also none of the sound in my Apps work, but when I put someone on loud speaker i can hear them?

nicolafromleongatha wrote:
Also none of the sound in my Apps work, but when I put someone on loud speaker i can hear them?
Are you asking a question or making a statement?
On the left hand side of the device, is the mute switch on???? Do you see a red dot? If so, the device is on mute, turn the volume on.

Can't get surround sound to work, all speakers pl

This is driving me nuts.
I have surround sound speakers and everything was working fine with them and my SB audigy card.
However I had to move the card over one pci slot to make room for my video card cooler.
After doing this I uninstalled the card/drivers and reinstalled them and what not.
However now I have no surround sound. I simply get sound from all the speakers the same.
I run the speaker test through the surround mixer/audio hq where it goes through each speaker to test it. The sound on that comes from every speaker even though it shouldn't. However my back right speaker doesn't have anything come from it during this test, but it plays sound from everything else.
I have both the surround mixer and windows set to use surround speakers, etc as it should be.

I fixed part of my problem.
I must have hit the rear wire or something because it was loose and I plugged it all the way back in and now my surround works how it should.
However the rear right speaker doesn't work right. I don't know why but it's like someone has the volume specifically turned down on it (like literally 98% down) only and the other speakers are normal.
However if I move the rear right speaker (on the subwoofer) an dplace another speaker in it's place, it will work fine. So it's not so much that speaker as it seems to be specifically the subwoofer connection for the rear right speaker.

Can't get Surround Sound to Work [Xonar DS]!

My speakers and such work fine by themselves, but only the front left and front right speakers will work in Premiere Pro when I have them set to surround sound.
I've checked in Windows Control Panel and the speakers are set up and work as 5.1.
I've been through all the settings in the "Xonar DS Audio Center" control panel and everything is set up the same.
The Xonar ASIO settings are at 32-bit with a 10ms latency.
[specs]
Windows 7 Ultimate
Premiere Pro CS6 (Creative Cloud)
ASUS Xonar 7.1 24-bit 192kHz Sound Card
Under Preferences | Audio Hardware, Default Device only lists "Premiere Pro WDM Sound."
The ASIO Settings button shows my output speakers checked as "Speakers (ASUS Xonar DS Audio Device)."
I've tried the "Device 32-bit Playback" button checked and unchecked.
Under Preferences | Audio Output Mapping, it lists only two speakers as left and right: "Speakers (ASUS Xonar DS Audio Device) - 1" and "Speakers (ASUS Xonar DS Audio Device) - 2."
The sequence is properly set up as 5.1.
When playing audio, I can pan left and right, but nothing comes from the center or rear speakers. If I drag the little puck in the Audio Mixer to one of the rear speakers, it properly lowers the volume for the front speakers, but still I hear nothing from the rear.
Help! Thanks!

Well, it previously had only "Premiere Pro WDM Sound" or "Adobe DV" listed, the former being chosen.
However, after updating my driver from 7.12.8.1792 (packaged) to 7.12.8.1794, the option "Xonar DS ASIO(64)" appears. Success, I think. Not so much.
[This adds options for 8 channels (L,R,Ls,Rs,C,Sub,Lb,Rb), of which all but the last two have area selections. The first two, L and R, have left and right button selections as well.]
Unfortunately, whenever I choose the Xonar option and click OK, nothing changes. I go back to Audio Output Mapping and it's defaulted back to "Premiere Pro WDM Sound." Ideas?
Thanks.

How can i get the sound to work again? it doesn't ring, play music but siri works :/

Is there anything i can do to fix this? i just restored the iPhone and it still doesn't work. please help
thanks!

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the problem continues, take the device to Apple for evaluation and possible replacement.

I can't get the sound to work on my videos

I have a couple of videos in my itunes and I am able to convert them so that they appear on my ipod but there is no sound while the video plays
Fifth Generation U2 ipod Video Windows XP

Jeff,
Unless I'm misunderstanding something technical, I think we're talking about two different things. Yes, I understand your point about copying DVD's, copy protection, etc. But the main point of this, and other, threads is not about breaking copy protection; it's about successfully converting video to put it on iPod, and retaining the audio. I have a bunch of short, non-copy protected, non-copyrighted video clips on my computer that the Conversion tool in iTunes simply won't convert with audio. That's where the "muxed" thing comes into play, or whatever it is. My clips vary: some are .mpg, some are .avi, whatever. I don't think iTunes successfully converted a single one of them. I ended up downloading some third party software that I learned about in these discussion forums.
That's my point. Whatever it is that these third party programs do, why can't Apple make iTunes do it?
Am I missing something? Are what these programs doing tied into breaking copy protection? Is there some link between "de-muxing" (is that right?) and removing copy protection? I plead ignorance on this one.

Can't get solaris sound to work

I have turned on the sound server and the volume is at full, but I have no sound of any kind.
Can anyone help? I am new to Solaris.

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

Can't get ac3 sound to work

Similar Messages

Maybe you are looking for