Can't get ADE to recognize my Kindle

I had seen some other similar forums and tried those tricks. I have the same Adobe ID as the id on the Kindle. I try and everytime I start ADE it just sits there. How can I get it to recognize the device?

Maybe you should hold up the Kindle in front of the camera?
Humor aside, Kindles aren't supported by ADE.  Sorry!
===============

Similar Messages

  • I can not get ADE to recognize my KOBO

    I am trying to activate my kobo, and I can't get ADE to do anything. I plug in my KOBO, launch ADE, and nothing happens. I read that ADE is supposed to recognize it automatically, but it doesn't. Absolutely nothing happens. How do I get it to recognize it?
    Thank you,
    -M-

    I don't mean to be patronizing, but the instructions to activate the
    ereader  'should' be in the box with it.  If you don't have instructions or
    some form of User Guide, you could go online and try to contact Kobo's
    Customer Service or Help functions....  When you do the activation, you
    should get updated software if there is any, because the Kobo website will
    be interfacing with your ereader.  It will put a small file on the ereader
    that contains information that ADE will use to authorize it so you can do
    the ebook transfers.
    Sorry I can't be more helpful.
    =========

  • Changing Authorization on Mac AND getting ADE to recognize ipad reader app

    I have just upgraded to an ipad 2, and lost some of my ebooks on my reader apps.  Two were ePub files in my ADE acct.  Now I can't get ADE to recognize any of the reader apps on the new ipad2, and I suspect, after reading some of the discussions, that the problem may lay with the incorrect email addy the ADE is authorized to.  I have uninstalled and reinstalled ADE several times, but at no point did it allow or ask for an email authorization, and will not allow me to change the email registration (which is old and not one I use any longer).  Any suggestions?

    First, the problem is that ADE does not support iPads.  Next, you can get
    Adobe to help you reset your email address without the hassle of installing
    or reinstalling the software.
    =============================

  • HT5621 I have changed my apple id on the manage my apple id page. For some reason, the id didn't change on my macbook air. My iCloud still registered my old email id and I can't get it to recognize my correct id. Any ideas? Thanks!

    I have changed my apple id on the manage my apple id page. For some reason, the id didn't change on my macbook air. My iCloud still registered my old email id and I can't get it to recognize my correct id. Any ideas? Thanks!

    Hi Baem_leeds
    Welcome to the Support Communities!
    If you change your Apple ID you will need to sign in with the new information or password the next time you use an Apple service or feature that uses Apple ID. If you have multiple devices that use features and services that require an Apple ID, you will need to sign in again on each device.
    The links below will provide additional information:
    Where can I use my Apple ID?
    http://support.apple.com/kb/HT5616
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Cheers,
    Judy

  • After OS clean install I can't get iTunes to recognize library on external drive

    I have a Mac Pro that had an SSD boot drive and a separate hard drive that contains my iTunes Library and Media files.  Because of problems with my boot drive I erased the SSD and did a clean install of Mavericks.  Now I can't get iTunes to recognize the iTunes Media files on the hard drive.  I've gone to Preferences/Advanced in iTunes and changed the "iTunes Media folder location" to point to the hard drive with the iTunes data on it.  Nothing happens when I do this. No dialogs. Nothing.  I've trashed iTunes preferences to no avail.  I don't know what to do to fix this or troubleshoot it.  Any help will be greatly appreciated.
    John

    John Baughman wrote:
    Now I can't get iTunes to recognize the iTunes Media files on the hard drive.  I've gone to Preferences/Advanced in iTunes and changed the "iTunes Media folder location" to point to the hard drive with the iTunes data on it.  Nothing happens when I do this.
    Nothing should happen when you do this. This simply tells iTunes where to put anything you add after this. It doens't tell iTunes where anything already in iTunes is located.
    Hold Option, launch iTunes, select Choose library... and select the iTunes folder on the hard drive.

  • How can I get iTunes to recognize the apps that are missing from the library screen but still on the machine??

    My apps are not showing-up in the iTunes library but they are present in the apps folder. How can I get iTunes to recognize their presence?
    Library-Apps-All (only three of several hundred appear).
    Apps are still present in Users-Music-Mobile Applications
    I am running iTunes 11.0, OS X 10.8.2 on a Mac Pro. 
    Ran Disk Utility, Techtool, Disk Warrior and then reinstalled Mountain Lion, updated it and repaired permissions. No change.
    There is a file that says 'iTunes Library (damaged), which is the iTunes Database file. How can that file be re-created?
    Any technical help on replacing that file with a new, fresh one would be appreciated!

    It has always been very basic to maintain a backup of media and other important files.  If you chose to reinstall the OS without having a backup, well that just is not smart.
    If you are in the US and running iTunes 10.3 or later, iTunes purchases can be redownloaded via iCloud.  Simply log into the iTunes store, select purchases, purchase history and redownload the content.
    If you are not in the US.... well, seems you just learned and important and possibly expensive lesson.

  • Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks to anyone who can help!!

    Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks!!

    That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
    Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
    If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

  • How can I get RoboHelp to recognize my FrameMaker installation?

    I have Technical Suite 3.5 installed and several RoboHelp projects linked to FrameMaker books.
    The Frame books were created in FrameMaker 10. I then upgraded to Technical Suite 3.5, then later upgraded my FrameMaker to 11.
    All was well, RoboHelp continued to update from the Frame book files.
    Then last week my hard disk crashed. IT provided a new disk, installed the Technical Suite and FrameMaker 11, but now when I open the RoboHelp projects and try to update them, RoboHelp displays an error message that says "Adobe FrameMaker 10 is not installed. No FrameMaker documents can be updated."
    When I try to relink the project to FrameMaker (File | Link), I get a similar message:  "This operation cannot be completed without FrameMaker 10. Install FrameMaker 10 and try again."
    How can I get RoboHelp to recognize my FrameMaker 11 installation, which it used to do prior to the crash and reinstallation?
    Thanks.
    Jerry

    We also cannot get Robohelp to recognize our FrameMaker installation. 
    We are using Robohelp 9  and Framemaker 11.
    We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so.  So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
    The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
    "This operation cannot be completed without FrameMaker.  Install FrameMaker and try again."
    I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error.  Buying a set of new Robohelp 10 licenses probably isn't an option.
    Any other suggestions?
    Thanks,
    Sue

  • Can't get itunes to recognize my iphone

    I'm a total newbie, just got my iphone 3G yesterday, I've read through all the troubleshooting but I still can't get itunes to recognize my iphone. Either nothing happens, like a device isn't hooked up, or it says that the "mobile device has not been activated" Hopefully this is a simple issue that I'm just overlooking, any advice would be greatly appreciated. Thanks!

    I do realize I'm talking to myself here haha. Well, now it seems to be even weirder because I juet kept trying and trying and it finally recognized the iphone but then after I start syncing, it cuts out after about a minute or two and I get an error message saying there was an "invalid response recieved from the device". So I hooked it back up and it recognized it again (after several tries) so I hurried and manually tried syncing some of favorite songs and then it cut out again, when I checked the phone only the ones I added the second time were there, the first round of syncing had been erased. It's a vicious cycle I'm in here! I had this phone for a day and I HATE it!! I'd rather have my dinky little razor phone that at least had video and zoom capabilities. So far all I want to do is take this thing and chuck it into the street!

  • I can't get itunes to recognize my ipod touch, 2nd gen.  synced it yesterday.  have restarted both computer and ipod.  my iphone syncs just fine.

    i can't get itunes to recognize my ipod touch, 2nd gen.  synced it yesterday.  have restarted both computer and ipod.  my iphone syncs just fine.

    You might find these sites helpful:
    The New User's Guide for iTunes
    iTunes 101
    iPod 101
    And of course the iTunes Help is a good, quick resource.
    Regards.

  • HT4059 can i get an ibook on my kindle?

    can i get an ibook on my kindle?

    Almost certainly, no.  While there are a few non-DRM locked books available in the iBook store, most are DRM locked to Apple's own iBook app and cannot be transferred to any other ereader app or device.

  • How can I get iMovie to recognize the external camera?

    iMAC running OSX 10.6.8 recognizes external HD Camera hardware, but iMovie fails to recognize the device.  I can copy files "manually" using Finder, but cannot import them directly into iMovie.  How can I get iMovie to recognize the camera?  I have already re-booted all devices and tried multiple USB ports.  In all cases the OS recognizes the camera, but iMovie does not.

    OK This camcorder is a fine camcorder. I have an earlier model of a similar camcorder from Panasonic. However, this newer model has one problem. It is not compatible with iMovie if you shoot at the highest quality mode, (which is 60P or 50P - which might be called 28MBPS mode). If you shoot 30P or 30i (even 60i) it will import to iMovie. Also, iMovie can handle 1280x720P60 and P50.
    It will definitely work on iMovie 11. It should probably work on iMovie 09. I doubt this camera will be recognized at all on iMovie 08, but it is worth a try. To see which iMovie you have, click iMovie/About and check the version. 9.04 would be iMovie 11. (9.08 is the current version, but it will not run on OSX 10.6.8). 8.06 would be iMovie 09. 7.1.4 would be iMovie 08.
    OK So how to work around this limitation?
    1) If you have Final Cut Pro X ($300) or can justify buying it, it will import 60P and 50P from this camera. However, if this seems a little pricey to you, keep reading.
    2) If you set your camera to record in 1080P30 and shoot a short clip, then iMovie should see the camera. Then I would suggest using iMovie import screen to create a CAMERA ARCHIVE of your camera. This will copy to your Mac the entire contents of the video files on your camera. You will need them later. I am assuming you have some valuable footage on the camera that you would like to have.
    3) Going forward, the simplest thing is to shoot in 1920x1080P30 and use iMovie normally. The biggest advantage of P60 or P50 is when you need really high quality slow motion effects. In other words, after you edit your movie, everything is converted to P30 or P25 anyway.
    4) If you want to retrieve the 1080P50 or 1080P60 clips that you have shot, then there are a couple of apps you can buy to convert them to a form that iMovie can edit. Two such apps are ClipWrap and Voltaic HD. There are also various free apps, but I cannot vouch for them. Do a search on google and you may find some that work.

  • How can i get itunes to recognize my iphone so i can download it and then download that into my new iphone4s???

    how can i get itunes to recognize my iphone (the first one) so i can download its info so i can then download that into my new iphone 4s.???

    Including going through all of Step 5? That can take some time, and should fix the problem. You have also removed and reinstalled iTunes following the steps in this support document? http://support.apple.com/kb/HT1923  As a last resort, see this support document. http://support.apple.com/kb/TS5376

  • Can't get Netflix to recognize an iTunes purchase keeps coming us with "the credit card information that you entered does not appear to be valid

    Can't get Netflix to recognize an iTunes purchase keeps coming us with "the credit card information that you entered does not appear to be valid'? Netflix says not them?

    The message you received indicates that the phone is locked to a carrier other than the one for which you have a SIM. You'll need to take the issue up with Apple. Nothing you do with iTunes is going to make a difference. 
    I'm quite surprised that the UK Apple Store replaced a U.S. purchased phone. They usually won't.
    Best of luck.

  • Can't get iphone to recognize itunes on my computer. do i have to use the original cord to connect? i can't find the cord. please advise.

    Can't get iphone to recognize itunes on my computer. do i have to use the original cord to connect? i can't find the cord. please advise.

    Do you mean that iTunes doesn't recognize your phone when you plug it into your computer using the usb to dock cable?  If so, see http://support.apple.com/kb/TS1538.  (And yes, you need to use the usb to dock cable that came with your phone.  If you dont' have it you'll have to buy another one.)

Maybe you are looking for

  • Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

    Hi, SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine. But the problem is that the SharePoint is not working correctly.We can

  • Error in creating create Consumer proxy:

    Hi all ,                 while creating create Consumer proxy: in SE80 ,by giving the URL of the webservice i am getitng a error which is Exception occurred in communication framework:Error in HTTP Framework:404conn failedhttp, i am new to this SOA,

  • From:, To: and Subject: end up in email body - html email using sendmail

    To the experts and the experienced: I am trying to send email in html format from a Korn shell script on Solaris 10. The email does get delivered and is displayed html-formatted, except that the From:, To: and Subject: lines are displayed in the emai

  • ASCII control characters in XML

    hi,guys I want to export InDesign content to an XML file using javascript. The problem is, except for TAB, LF, and CR the control characters (those below ASCII 32) are not allowed in well-formed XML and any parser worth its salt will puke. Adobe (mis

  • Can we use Boolean or Validations in HFM Rules

    Hi Gurus Can we use Boolean or Validations for input cells in HFM? Example: 1. I want to restrict the user to enter only single digit (0 or 1 are valid) in to a cell for a special purpose. (in smartview or webform) 2. I want to restrict the user to e