Can't Get Airport Express to Connect to my D-Link DIR-655?

Here's what I did - I should point out all I wanted to do was connect my PC based iTunes upstairs with my stereo system downstairs. First I tried to have the Airport Express join the d-link wireless network. It joined but playback was choppy and I could not get it to work. Next I tried my solution for the Xbox Live issues we've had, which is to go with a NetGear home wiring etherenet, and try to get it on that, but the network never saw the Airport Express. Last, I simply set up the Airport Express as a second wireless (but only "local") network in the house, and so far it works like a charm - no choppy plyback, and I use my iTouch with the Remote app to control iTunes from anywhere in the house. So perseverance won out. However, it really was a bummer that the other solutions did not work, and proved once again to me the "glitchiness" of Apple products.

I'm sorry you are having problems. When I cabled directly to the Express from my computer and ran the assistant it worked perfectly. After disconnecting the calbe, it connected wirelessly to my existing network. I am running an Aiport Extreme for my base station, I don't know if that makes a difference. When you run the assistant do you select "Join existing network"? There is a great post on here somewhere with other instructions on setting up the Express a different way. Sorry I can't be more helpful.

Similar Messages

Can't get airport express to connect to internet after ISP changed my modem

Hi. My internet service provider installed fibre optic to my house, so they gave me a new modem. Have not been able to get airport express to connect to the internet ever since. Just get the flashing amber light. Other than paying $50 for phone support, I have no idea what to do. I just use the airport so I can play music from iTunes from my stereo using airplay. I use the airport utility on my laptop.

Does the new modem provide a Wi-Fi network? If it does, and your only goal with Express is for iTunes streaming, the Express would just need to be reconfigured to join the new modem's wireless network. Please check out the following Apple Support article for details.

Can't get Airport Express to connect to my network

I have a netgear wireless router, and the when I plug in the aiport express, it just blinks yellow. When I run the Airport express assistant, it gives me a warning that windows is not managing my wireless network. This is very frustrating!! What can I do?

I'm sorry you are having problems. When I cabled directly to the Express from my computer and ran the assistant it worked perfectly. After disconnecting the calbe, it connected wirelessly to my existing network. I am running an Aiport Extreme for my base station, I don't know if that makes a difference. When you run the assistant do you select "Join existing network"? There is a great post on here somewhere with other instructions on setting up the Express a different way. Sorry I can't be more helpful.

New router now can't get airport express to work

Att installed a new wireless router.
Everything else seems to be fine but can't get airport Express to communicate with My MAC. Green light on airport device. Just downloaded OX on Mac recently.
Any suggestions would be appreciated!

Reset the Express to factory and start over.. this is always required when you make major network changes.

Can I use Airport Express to connect to a printer, Time Machine Back up drive, second b/u drive, and scanner through a USB hub? if so, how?

I have an Airport Express that connects to my printer. I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
The printer connects to the Airport Express through a USB hub and is recognized. I cannot get the scanner nor either of the back up drives to be recognized. Is there a way to do it or will I need to rely on a USB hub wired to the USB port of the MacBookPro? If it is possible, can you walk me through the set up for each?
Thanks,
Doug Earle

I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
Unfortunately, the USB port on the AirPort Express will only work with a compatible printer.
It will not work with a scanner, copier, or hard drive.
It should be possible to do what you want by connecting a powered USB hub to your Mac and then connecting the devices to the powered hub.
The setup for the scanner and hard drive would be covered by the manfacturers documentation, so providing specific advice for those types of products would be outside the realm of this support area.
But, if you can provide model numbers, it is always possible that another user who is using those products might see this post.

I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

Apple calls this configuration a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Can't get airport express to print. Music transfers wirelessly but not the print. How do I fix this

I cant get the airport express to connect to computer for printing. It does connect for music but not printing. How do I correct this

Don't know, how did you hook it up (what kind of cable)? You can send audio through an HDMI connection provided a MacBook Pro is (I believe) from 2009 or newer.
Converting to VGA or DVI will not send audio - if you're using that kind of connection, you'll need to add an audio cable from the headphones port.
Also check the Sound Out setting in the Sounds panel of System Preferences.
Matt

HELP! Can't Get Airport Express to work.

I used to have a full setup with Time Capsule wireless & Airport Express connected to my stereo. My Time Capsule died last year and I haven't used the Airport Express since. I wanted to set up a wireless network with it instead of having to keep my laptop on the ethernet. I reset the Airport to factory settings and set it up again but I can't get my MacBook to connect to the internet with it. I keep getting a conflicting network ID message. I've tried this before and couldn't get it to work so I just keep going back to ethernet.

And you have a DSL modem, correct?
Might you have the make and model number of this device handy?

Can I get Airport to automatically connect to a stronger Access Point

Hello,
I am running Leopard 10.5.3 and have 2 access points (not apple) on the one network. One AP is at the opposite end of my house to the other.
When I make it to the opposite end of the connected AP, I get only 1 bar and it usually drops. Can I set airport to automatically connect to the strongest AP automatically even if it isn't out of signal?
I hope this makes sense?

I have to Wireless access points on the 1 network yes.
I have one of the AP's set up as a preferred network.
However once I am far away from it, I only get 1 bar of strength and then the connection becomes inconsistent (will go to no signal and then back to 1 etc.) At this point when it is doing this no signal to 1 I want airport to change to the AP. Is this possible?
I hope that is clearer.

Can I use airport express without connecting to a router?

I hate trailing a long wire across my room just to listen to music through my (old but still fantastic) stereo system. I share a house with friends and our router is in the living room.. does the airport express need the router to work? sorry if this is a dumb question, there just doesn't seem to be an answer anywhere!

You do not need the AirPort Express to connect to a router in order to stream iTunes. In its default mode, the AX provides a standalone wireless network. You would just need to connect to this network to stream. The drawback, of course, is if your are getting your Internet access via another wireless network, you would have to switch networks to perform either.

Just can't get Airport Express to configure: it worked at my mum's, but not at home!

Hello helpful people,
I am really hoping someone can think of what's going wrong with my set up. I keep getting an error message "an unexpected error occurred, please try again" when i try to do my configuration. I only want it to stream music from my ipad to my stereo. I would really prefer to do the set up only using an ipad, if at all possible.
I was given a shiny new Airport Express for Christmas. As i was staying at my mum's for two weeks, I plugged it into her stereo, and got it working. This was configured to join her existing wifi network, using only my iPad to set it up. The airport utility software was not used, as i didn't know it existed. All worked fine.
It looks as if my router is running WEP. So i gather i need airport utility to configure it. Airport utility says it can't detect a base station anywhere, even when inches away. There don't seem to be any options to get it to work differently.
I have reset and factory reset the device many times.
Some level of wireless access must be working on it, as it appears on my wireless list as a possible "set up airport express base station"
I go through the menus to set it up in the same way as at my mum's: selecting my existing wifi network to add it into, setting up a new base station password, and then watching and waiting.
Among the different resets and re-attempts i have done, it varies slightly in behaviour: the last time it failed it didn't get as far as asking for my wifi password.
After the error message i can't "try again" as suggested. It wipes out my wifi access, so i need to delete my existing wifi network (on the ipad) and re-add it to get an internet connection back again. I need to do a reset to get the "configure new base station" message back.
The differences between the two houses:
The stereo connection is different in the two houses: single 3.5mm jack into mum's; 3.5mm jack split into two needed for our stereo. I know it says you need to plug into the stereo first (and I have), but surely the device doesn't care which cable i use?
At my house, the wireless router and airport box are within 4m of each other. At my mother's it's more like 20m.
My wireless router is from O2 (now Sky), my mother's is plusnet.

It looks as if my router is running WEP.
Virtually no security at all there, as there are numerous free utilities available on the Internet that will crack a WEP network in seconds. You might as well run the network wide open, since WEP offers about the same level of protection.
You will not be able to configure the Express using an iPhone, iPad, or any version of AirPort Utility that is 6.x or higher with your router set to use WEP "security". They will not work with WEP, since it is so long out of date and non-secure.
An older version of AirPort Utility 5.x might allow you to configure the Express using WEP security, but with no protection anyway, this would be of little value.
See if your router can be configured to use WPA2 Personal security or WPA/WPA2 Personal security. If it can, then you will be able to use an iPhone, iPad, or any version of AirPort Utility to configure the Express in just a few minutes.
If your router cannot be configured to use stronger current WPA settings, now might be a very good time to ask your service provider for a new router.

Can't get Airport Express to work with Windows

I got a used Airport Express to use as a wireless print server. I got only the Airport Express; no manuals or CD's or anything. I have been reading through the manuals and everything online, but I can't get anything to work. It seems like I need to get the Airport Express Assistant, but I can't find it. I got the Airport Admin Utility, and that installed fine on Windows Vista. Then I installed what I thought was the Express Assistant, and it just seemed to change the Airport software in the start menu, but I still don't have the Assistant, only the Admin Utility. Anyway, I open the Admin Utility and it opens the Base Station Chooser. There is nothing there, so I rescan, and it seems to do nothing. It doesn't find anything anyway.
Where do I go from here? I am kind of stuck. I am trying this on a Windows Vista PC which is hardwired to a Linksys WRTSL54GS router. I have the airport express plugged in and the light is flashing Amber. I have a HP psc2410 plugged into the airport express that I would like to print wirelessly to.
Thanks for any help.

You don't necessarily need the AirPort Setup
Assistant, you should be able to set up the AirPort
Express Base Station (AX) with the AirPort Admin
Utility...as it is a much more powerful tool. You
need to make sure that you are using the version for Windows. At this
time, the AirPort software is only supported for
Windows 2000 or XP. A Vista-version has not been
released.
I suggest the following...
- First, perform a "factory default" reset on the AX to get
it back to it's original "out-of-the-box" state.
- Next, temporarily connect your computer directly,
using an Ethernet cable, to the Ethernet port on the
AX during the set up phase.
- Then set up the AX as a "wireless client."
I have this same problem. I have a Vista Windows notebook and I am trying to get airport working to play music wirelessly through my home stereo. The "base station chooser" software does nothing on my Vista notebook.
I used a friend's MacBook and was able to set up the airport as a client so I can see it listed in my Dlink router DHCP Client Table. The airport express box is plugged in, has a steady green light and everything looks good except there is no option to choose "computer" or "home stereo" speakers in my iTunes. i installed the airport express CD including the itunes it came with.
Any ideas how to get this working on vista? Previously i had the newer version of iTunes 7.1 installed and the airport express CD told me it couldn't complete the install because a newer version of iTunes was installed. I uninstalled the iTunes and reinstalled the CD including the iTunes version 4.
Help!
Sony Vaio Windows Vista

Can't get Airport Express A1088 to work with A1264

Hi,
My modem and office are at opposite ends of my home, so I've been using 2 x Airport Express base stations (both A1088) to connect to the internet. One is plugged into the modem via an Ethernet cable, the other is set up in a hallway to extend the range (I just lose the signal if I only use one AX). On Sunday, one A1088 "died" so I bought an A1264 to replace it. I've tried to set them up as a network (following WDS instructions on this site, etc), but no joy. Airport Utilities just won't "see" them. Any tips for set-up or ideas where I might be going wrong? Is there a step-by-step guide anyone can direct me to? Or would I be better off just buying a second A1264?
Thanks in advance for your help.

Consider it purged, John!
I got a survey which I filled in as constructively as possible (largely because I didn't want to get the second guy any grief because I feel he was as helpful as he was able to be.)
I finally sorted out the issue, with one final hiccup ("Join a network" was so branded on my brain from my attempts at THAT ACRONYM that I forgot I needed to use "Extend a network" instead – d'oh!)
Crazy as it sounds, I think one problem is with terminology. If I'd said "802.11n" and/or "802.11b/g" instead of A1264 and A1088, the Applecare guys may have got what I was on about a bit quicker, but surely the customer is going to go by the name on the label (ones that also seem to be used everywhere from this forum to eBay!), so surely it's up to Apple to make certain their staff are aware of model numbers, etc?
I agree with what you're saying about customer service. It's probably not an easy job - I don't think I was rude at any point (at least I hope not), though I may have sounded whiny and stressed, which would have been nothing personal, just frustration with the situation. But there are ways for helpline staff to say, "OK, let's go through this one step at a time…" without getting uppity!

Can't get the Express to connect to the internet.

So for whatever reason, my express, which was working fine for a long time, jsut stopped working today. I had to do a hard restart (pushing the restart button then plugging the unit in till the light flashed green) and I ran Airport Utility to reset the settings. I've tried both ethernet and PPPoe with the password and account name, but to no avail. I have DSL and a DSL modem which connects to the the Airport Express. Also, after resetting the settings in Airport Utility and getting the message that all is well, the light on the Express still flashes yellow. What does that mean? I know it should be green, shouldn't it? FYI I have restarted the computer and the modem many times and tried every combo I can think of. Any one got any bright ideas?

How do I make sure that the computer isn't trying to connect with a PPPoE?
On your computer that has the PPPoE connection on board,
Open System Preferences (gear icon) on the dock
Open Network
Look for a connection on the left associated with PPPoE. If it's present, make sure that the light is yellow and the status is "Not Connected".
It would be better if you deleted the connection by highlighting the connection and clicking the - (minus) button at the bottom of the connection list. You can always set up a new PPPoE connection in the future if you need to connect the modem directly to the computer.
Do the same for any other computers that may have the PPPoE connection setup software installed. You only want the PPPoE credentials on the AirPort Express.
If you don't see the PPPoE connection in Network, then another application has probably been installed on your computer with this information. Look under Applications to see if you can find a listing with the name of your service, etc.
Message was edited by: Bob Timmons

Can't get AirPort Express Setup Assistant to Work

I'm having trouble just setting up AirPort Express. (All I want to do is play iTunes from a stereo system in another room.) I purchased an "AirMac Express base station" in Tokyo a few days ago, took it out of the box, and followed the instructions as far as connecting audio jacks and plugging the base station into an electric outlet. (My iMac is also a Japanese machine, and I'm using it in Tokyo.
The next step was supposed to be opening AirPort Setup Assistant and obeying it. But the SA wasn't in Apps>Utilities, where the instruction manual said it would be, so I used the CD that came with the base station to install SA.
I did manage to open it and get as far as the first step, but then I got this message:
"In order to use the AirPort Setup Assistant your AirPort card must be enabled and AirPort needs to be turned on and set to use DHCP. Click OK if you would like to change these settings, or Skip if you would like to configure AirPort Base Stations using ethernet."
(An AirPort card was factory-installed, and AirPort is turned on.) So I clicked on "OK." Then I get this message and SA vanishes:
There was an error communicating with your AirPort card. Please make sure it is installed properly and try the AirPort Setup Assistant again.
I have looked in support as best I can and also tried some googling, but I still have idea what to do. Can anyone help?
Many thanks!

I finally found the answer to my question in Joe Kissell's Taking Control of Upgrading to Leopard. For anyone who may need to know, the AirPort Setup Assistant is no longer used to set up base stations. That task has now been delegated to Airport Utility. Duh.
But why couldn't Apple manage to put this information in a place where people who bought a base station could find it??

Can't Get Airport Express to Connect to my D-Link DIR-655?

Similar Messages

Maybe you are looking for