Can't get airport extreme to connect to xbox

Hi! As you can tell from my post I am really new at this, i will try to explain as best I can:
I have an Airport Extreme Base station(AEBS) connected by ethernet to a Westell 327W router, my airport is in bridge mode and has is successful networking three other laptops and a printer in the house. The problem is only with my xbox 360 The 360 reads the base station correctly, but will not accept the password (I have double-checked with ISP and the password is correct, X-box just won't accept it.) I have attempted to program with the Equivalent Network Password that I found (Airport>Base station >Equivlaent Network Password) to no avail. I was told by x-box tech that AEBS is just not compatible with 360 system. Please help - i don't want to re-do the whole system to get X-box live! Thanks. (I hope this description makes sense)

My son has his xbox live working wifi with the aebs (n).
However, he frequently complains about delays in general and delays with certain other players networked into the game. Occasionally, cable internet can slow down and xbox live regularly has its own issues. What is needed here is someone who can suggest alternative configurations using the aebs dhcp/nat settings. The airport utility help on this subject seems tentative and noncommittal in the vague suggestions provided. Miscrosoft xbox live is a reality that needs to be addressed. I am working on this issue when I can now. If I get any useful info, I will post it here. Is there an online gaming discussion group? That could help.

Similar Messages

  • Can't get Airport Extreme to connect to Internet

    I have a D-Link 320T ethernet modem. This works fine connected straight into my Mac, but as soon as its connected to the Airport I loose my internet connection. Its seems to be something to do with my setup, but I'm clueless as to what.
    My airport seems to be transmitting something, as my Nintendo DS can pick up the Network name I have created, but it gives me this message "connected to access point, but unable to connect to the server", error code 52100.

    Hi Bidge,
    Welcome to the Apple.com user discussion boards!
    Do you have ADSL? Have you setup the Airport Extreme to establish the PPPoE session with your ISP?
    To configure this, please refer to this Apple article - http://docs.info.apple.com/article.html?artnum=166636

  • Can't get airport extreme to connect to the internet?

    My sister in law just purchased an airport extreme for her windows pc and when we connect the ethernet from the modem to the airport, the amber light flashes, indicating that it has no connection to the internet. We have rebooted both the airport and the modem, what do we do now?

    Download the setup manual for your AEB here:
    http://support.apple.com/manuals/#airport
    Follow the setup instructions.
    Flashing light could also mean that a firmware upgrade is available for your AEB.

  • I can't get airport extreme to work with iPad

    I can't get airport extreme to work with iPad

    Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
    In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
    Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour.

  • Can't get Airport Extreme card to work in G5 Powermac

    I'm probably being a dummy, but I need some help.
    My main computer is just under two years old and has funcioned on a network through ethernet. Internet access comes through cable and I have a Linksys wireless router. My G4 ibook has operated on this network with an airport card quite successfully.
    I decided to get rid of some cables and put the G5 on wireless. I installed an Airport Extreme card, connected the antenna. The Network Status panel tells me that the Airport card is turned on but not connected to a network. The signal indicator on the menu bar is greyed out.
    Any attempts I have made to find a network signal or configure the card seem to be doomed.
    What am I doing wrong?

    IF those are the only two options, I don't know what it could be.
    Going backwards,
    Double check your antenna on the card.
    Pull up Software Update, perhaps an update will come up for this situation.
    Boot to an OSX install disk, Run Disk Util and run a Disk Repair then Disk Permissions Fix. Unlikeley bit worth a shot
    Return the card?
    Sorry man...

  • Can I get Airport to automatically connect to a stronger Access Point

    Hello,
    I am running Leopard 10.5.3 and have 2 access points (not apple) on the one network. One AP is at the opposite end of my house to the other.
    When I make it to the opposite end of the connected AP, I get only 1 bar and it usually drops. Can I set airport to automatically connect to the strongest AP automatically even if it isn't out of signal?
    I hope this makes sense?

    I have to Wireless access points on the 1 network yes.
    I have one of the AP's set up as a preferred network.
    However once I am far away from it, I only get 1 bar of strength and then the connection becomes inconsistent (will go to no signal and then back to 1 etc.) At this point when it is doing this no signal to 1 I want airport to change to the AP. Is this possible?
    I hope that is clearer.

  • Can't get airport express to connect to internet after ISP changed my modem

    Hi. My internet service provider installed fibre optic to my house, so they gave me a new modem. Have not been able to get airport express to connect to the internet ever since. Just get the flashing amber light. Other than paying $50 for phone support, I have no idea what to do. I just use the airport so I can play music from iTunes from my stereo using airplay. I use the airport utility on my laptop.

    Does the new modem provide a Wi-Fi network? If it does, and your only goal with Express is for iTunes streaming, the Express would just need to be reconfigured to join the new modem's wireless network. Please check out the following Apple Support article for details.

  • Can't get Airport Extreme and Express to join same network

    I recently bought an Airport Extreme so I could create a wireless network with my Airport Express. THis way I could browse the internet and stream music to my stereo at the same time. After spending hours trying to get both AP Extreme and Express linked together in a WDS network, I have failed time and time again. I have no problem setting the AP Extreme as the WDS main. My iMac and laptop connect to the AP Extreme just fine. I can set up the AP Express to stream music via iTunes to my stereo without problems. But to get them working together in the same network has got me stumped.
    I've set the AP Extreme as WDS main and Express as WDS remote. They are both set to same wireless channel. Where am I going wrong? Is it a 802.11n/802.11g compatibility issue?
    I'd appreciate any insight. Thanks.

    adrian,
    I have done this a dozen time today with different base stations like yours.
    The only thing I can think of is this:
    1. With the WDS Main, make sure you have the address of the Remote in the box.
    2. With the WDS Remote, make sure you have the address of the Main in the box.
    3. Make sure both base stations have the same network name in the wireless tab.
    Then restart both base stations.
    Let us know what you find out.
       Joseph Kriz

  • Can't Get Airport Extreme To Dial-Up To ISP

    Just bought 2 of the UFO style Airport Extremes. I set both of them up, one at my house and one at my girlfriend's. Used her iBook to set them up and went through the Setup utility and all seemed fine except when I tried to set up the APX to dial up to the ISP I can't get into the Airport Admin Utility. The setup guide tells me to use the Admin Utility to configure the dialing with the ISP's phone number, my username, password, etc., but when I open Admin Utility, it doesn't recognize the network and none of the blocks are activated so I can't enter any info. I also tried it with my friend's PC laptop and got the same thing. Both computers recognize the network but I can't connect to the ISP because I only have a dial-up connection and without getting into Admin Utility I can't configure the APX to dial up. Any ideas?

    Duane, thanks for the response and sorry for my delay replying - I was out of town for several days. Your advice was right on. I did a hard reset and then set up the AirPort with an ethernet cable to my computer and was able to configure it correctly. Am a little miffed at Apple on this one as the manual was confusing. It says that the dial-up modem in the AirPort can be configured in AirPort Setup or Admin Utility but I didn't find that to be the case. Nothing in AP Setup allows input of the ISP's phone number and my username and password for the account. It has be to done in Admin Utility. Second problem was that my girlfriend's computer had taken a voltage spike during a storm a few nights earlier and I found out while configuring the AP that not only had the spike blown her internal modem but also did something to the wireless capability on her computer because it often wouldn't find the connection or it would lose it, even when the base station was only a couple of feet away. Thank again for your help.

  • Can't get Airport Extreme to recognize my eMac.

    I just invested in a MacBook and AirPort Extreme - I have the internet running on the MacBook but cannot get the older eMac (OS2.8) to recognize the wireless connection. I'm using a cable modem for internet connection. It looks like there is an AirPort Utility in the eMac but it doesn't recognize the MacBook as a base station. Would appreciate any help.

    In the system profiler of the eMac there are two AirPort entries: AirPort Admin Utility and AirPort Setup Assistant (both files are from 2003). Does this mean that I have a wireless card?
    No those are just applications used to configure one of Apple's base stations.
    In System Profiler, look under Network and then click on "AirPort Card". Is there any information in the right column? If not, the wireless card is not installed.
    If not, how can I reconnect the eMac to the cable service without shutting down the MacBook Base Station?
    When you say "MacBook Base Station" I assume that you mean AirPort Extreme base station (AEBS). You can connect the eMac to the AEBS via Ethernet without shutting anything down.

  • Can't get airport extreme to configure as primary or secondary unit in net

    hi
    after my network of various bits & bobs went bottom up i decided to remove everything non-apple.
    i want to now try connecting my A/extreme to the cable modem and then use:
    The ethernet ports to wire in 2 PCs (wife's ) and a network HP Laser.
    The wifi to connect - A Time Capsule ( if possible to extend range of wifi as well as backing up),
    A Mac Mini to act as an iTunes server
    An Apple TV ( fed from the Mac Mini)
    A MacBook Pro,
    I would also like to connect in an xbox360 for occasional online gaming if possible. (wired/wifi)
    The problem i have now seems to be getting the A/extreme to connect via ethernet to cable modem (ntl/virgin media UK). my MBP sees the unit but the AE will not find the internet!!!
    any ideas on how to resolve this issue or go about building the network?

    Most cable modems require that they be reset before they will recognize and communicate with a new device. Have you reset the cable modem?
    Most cable modems reset by simply powering them off and back on.
    Some cable modems contain a small internal battery which must be removed to do the reset.
    Some cable modems have a reset button.
    Some cable modems must be turned off overnight (or at least several hours) so that equipment back at the ISP's office can reset.

  • How can I get airport to automatically connect to a network again?

    Dear helpful ones,
    I connect to the internet and a printer via a wireless router. Previously airport automatically logged in to my network. Recently, I had to reset my router and modem. Since then, airport doesn't automatically log in. I need to manually select my network from the airport menu to join after every time the computer sleeps or is shut down. The password is still in the keychain. I didn't think any of my computer setting had changed or needed to...
    If anyone can offer a suggestion as to how to get airport to once again automatically log in to my wireless network, this would be most appreciated.
    Yours, Jeremy

    There's quite a common problem with OS X and getting it to auto-connect, although there are fairly obvious simple ways to solve it they didn't always work, the procedure below is long winded but does have a fairly high success rate.
    1. Move "System Preferences.app" to "Applications\"
    2. Delete all preferred networks in Network Preferences
    3. Delete all Airport password in Keychain Access
    4. Restart
    5. Choose network from drop-down menu and enter password
    6. Restart

  • Can't get Airport Extreme Card working

    I recently purchased a refurbished Airport Extreme Wiresless card for my EMAC from the Apple Store, installed it, but now when I try to configure the network connection, Wireless Airport is greyed out. I don't have the Extreme Station and didn't think I needed it, but I cannot figure out to make the connection to my existing wireless cable modem router in my house. Any help in this situation would be greatly appreciated!
    Thanks, SBeck

    Technoqueen,
    Welcome to the Apple Discussions!
    Does the card appear in Applications> Utilities> System Profiler under the Network> Airport Card heading? There have been a number of reports over the years from posters here in the Discussions to the effect that the Airport Extreme card is an extremely tight fit in the eMac. The card can fell as if it's fully seated in the slot, yet not actually be all the way in. It takes a surprising amount of force to fully seat the Airport Extreme card that last fraction of a millimeter; you need to push the card until just short of where the 50-lb eMac is shoved away from you on your work surface.

  • Can't Get Airport Express to Connect to  my D-Link DIR-655?

    Here's what I did - I should point out all I wanted to do was connect my PC based iTunes upstairs with my stereo system downstairs. First I tried to have the Airport Express join the d-link wireless network. It joined but playback was choppy and I could not get it to work. Next I tried my solution for the Xbox Live issues we've had, which is to go with a NetGear home wiring etherenet, and try to get it on that, but the network never saw the Airport Express. Last, I simply set up the Airport Express as a second wireless (but only "local") network in the house, and so far it works like a charm - no choppy plyback, and I use my iTouch with the Remote app to control iTunes from anywhere in the house. So perseverance won out. However, it really was a bummer that the other solutions did not work, and proved once again to me the "glitchiness" of Apple products.

    I'm sorry you are having problems. When I cabled directly to the Express from my computer and ran the assistant it worked perfectly. After disconnecting the calbe, it connected wirelessly to my existing network. I am running an Aiport Extreme for my base station, I don't know if that makes a difference. When you run the assistant do you select "Join existing network"? There is a great post on here somewhere with other instructions on setting up the Express a different way. Sorry I can't be more helpful.

  • Can't get Airport Express to connect to my network

    I have a netgear wireless router, and the when I plug in the aiport express, it just blinks yellow. When I run the Airport express assistant, it gives me a warning that windows is not managing my wireless network. This is very frustrating!! What can I do?

    I'm sorry you are having problems. When I cabled directly to the Express from my computer and ran the assistant it worked perfectly. After disconnecting the calbe, it connected wirelessly to my existing network. I am running an Aiport Extreme for my base station, I don't know if that makes a difference. When you run the assistant do you select "Join existing network"? There is a great post on here somewhere with other instructions on setting up the Express a different way. Sorry I can't be more helpful.

Maybe you are looking for