Can't get Airport Extreme to recognize my eMac.

I just invested in a MacBook and AirPort Extreme - I have the internet running on the MacBook but cannot get the older eMac (OS2.8) to recognize the wireless connection. I'm using a cable modem for internet connection. It looks like there is an AirPort Utility in the eMac but it doesn't recognize the MacBook as a base station. Would appreciate any help.

In the system profiler of the eMac there are two AirPort entries: AirPort Admin Utility and AirPort Setup Assistant (both files are from 2003). Does this mean that I have a wireless card?
No those are just applications used to configure one of Apple's base stations.
In System Profiler, look under Network and then click on "AirPort Card". Is there any information in the right column? If not, the wireless card is not installed.
If not, how can I reconnect the eMac to the cable service without shutting down the MacBook Base Station?
When you say "MacBook Base Station" I assume that you mean AirPort Extreme base station (AEBS). You can connect the eMac to the AEBS via Ethernet without shutting anything down.

Similar Messages

  • I can't get airport extreme to work with iPad

    I can't get airport extreme to work with iPad

    Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
    In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
    Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour.

  • Can't Get Airport Extreme To Dial-Up To ISP

    Just bought 2 of the UFO style Airport Extremes. I set both of them up, one at my house and one at my girlfriend's. Used her iBook to set them up and went through the Setup utility and all seemed fine except when I tried to set up the APX to dial up to the ISP I can't get into the Airport Admin Utility. The setup guide tells me to use the Admin Utility to configure the dialing with the ISP's phone number, my username, password, etc., but when I open Admin Utility, it doesn't recognize the network and none of the blocks are activated so I can't enter any info. I also tried it with my friend's PC laptop and got the same thing. Both computers recognize the network but I can't connect to the ISP because I only have a dial-up connection and without getting into Admin Utility I can't configure the APX to dial up. Any ideas?

    Duane, thanks for the response and sorry for my delay replying - I was out of town for several days. Your advice was right on. I did a hard reset and then set up the AirPort with an ethernet cable to my computer and was able to configure it correctly. Am a little miffed at Apple on this one as the manual was confusing. It says that the dial-up modem in the AirPort can be configured in AirPort Setup or Admin Utility but I didn't find that to be the case. Nothing in AP Setup allows input of the ISP's phone number and my username and password for the account. It has be to done in Admin Utility. Second problem was that my girlfriend's computer had taken a voltage spike during a storm a few nights earlier and I found out while configuring the AP that not only had the spike blown her internal modem but also did something to the wireless capability on her computer because it often wouldn't find the connection or it would lose it, even when the base station was only a couple of feet away. Thank again for your help.

  • Can't get Airport Extreme and Express to join same network

    I recently bought an Airport Extreme so I could create a wireless network with my Airport Express. THis way I could browse the internet and stream music to my stereo at the same time. After spending hours trying to get both AP Extreme and Express linked together in a WDS network, I have failed time and time again. I have no problem setting the AP Extreme as the WDS main. My iMac and laptop connect to the AP Extreme just fine. I can set up the AP Express to stream music via iTunes to my stereo without problems. But to get them working together in the same network has got me stumped.
    I've set the AP Extreme as WDS main and Express as WDS remote. They are both set to same wireless channel. Where am I going wrong? Is it a 802.11n/802.11g compatibility issue?
    I'd appreciate any insight. Thanks.

    adrian,
    I have done this a dozen time today with different base stations like yours.
    The only thing I can think of is this:
    1. With the WDS Main, make sure you have the address of the Remote in the box.
    2. With the WDS Remote, make sure you have the address of the Main in the box.
    3. Make sure both base stations have the same network name in the wireless tab.
    Then restart both base stations.
    Let us know what you find out.
       Joseph Kriz

  • Can't get airport extreme to connect to xbox

    Hi! As you can tell from my post I am really new at this, i will try to explain as best I can:
    I have an Airport Extreme Base station(AEBS) connected by ethernet to a Westell 327W router, my airport is in bridge mode and has is successful networking three other laptops and a printer in the house. The problem is only with my xbox 360 The 360 reads the base station correctly, but will not accept the password (I have double-checked with ISP and the password is correct, X-box just won't accept it.) I have attempted to program with the Equivalent Network Password that I found (Airport>Base station >Equivlaent Network Password) to no avail. I was told by x-box tech that AEBS is just not compatible with 360 system. Please help - i don't want to re-do the whole system to get X-box live! Thanks. (I hope this description makes sense)

    My son has his xbox live working wifi with the aebs (n).
    However, he frequently complains about delays in general and delays with certain other players networked into the game. Occasionally, cable internet can slow down and xbox live regularly has its own issues. What is needed here is someone who can suggest alternative configurations using the aebs dhcp/nat settings. The airport utility help on this subject seems tentative and noncommittal in the vague suggestions provided. Miscrosoft xbox live is a reality that needs to be addressed. I am working on this issue when I can now. If I get any useful info, I will post it here. Is there an online gaming discussion group? That could help.

  • Can't get Airport Extreme to connect to Internet

    I have a D-Link 320T ethernet modem. This works fine connected straight into my Mac, but as soon as its connected to the Airport I loose my internet connection. Its seems to be something to do with my setup, but I'm clueless as to what.
    My airport seems to be transmitting something, as my Nintendo DS can pick up the Network name I have created, but it gives me this message "connected to access point, but unable to connect to the server", error code 52100.

    Hi Bidge,
    Welcome to the Apple.com user discussion boards!
    Do you have ADSL? Have you setup the Airport Extreme to establish the PPPoE session with your ISP?
    To configure this, please refer to this Apple article - http://docs.info.apple.com/article.html?artnum=166636

  • Can't get Airport Extreme card to work in G5 Powermac

    I'm probably being a dummy, but I need some help.
    My main computer is just under two years old and has funcioned on a network through ethernet. Internet access comes through cable and I have a Linksys wireless router. My G4 ibook has operated on this network with an airport card quite successfully.
    I decided to get rid of some cables and put the G5 on wireless. I installed an Airport Extreme card, connected the antenna. The Network Status panel tells me that the Airport card is turned on but not connected to a network. The signal indicator on the menu bar is greyed out.
    Any attempts I have made to find a network signal or configure the card seem to be doomed.
    What am I doing wrong?

    IF those are the only two options, I don't know what it could be.
    Going backwards,
    Double check your antenna on the card.
    Pull up Software Update, perhaps an update will come up for this situation.
    Boot to an OSX install disk, Run Disk Util and run a Disk Repair then Disk Permissions Fix. Unlikeley bit worth a shot
    Return the card?
    Sorry man...

  • Can't get Airport Extreme Card working

    I recently purchased a refurbished Airport Extreme Wiresless card for my EMAC from the Apple Store, installed it, but now when I try to configure the network connection, Wireless Airport is greyed out. I don't have the Extreme Station and didn't think I needed it, but I cannot figure out to make the connection to my existing wireless cable modem router in my house. Any help in this situation would be greatly appreciated!
    Thanks, SBeck

    Technoqueen,
    Welcome to the Apple Discussions!
    Does the card appear in Applications> Utilities> System Profiler under the Network> Airport Card heading? There have been a number of reports over the years from posters here in the Discussions to the effect that the Airport Extreme card is an extremely tight fit in the eMac. The card can fell as if it's fully seated in the slot, yet not actually be all the way in. It takes a surprising amount of force to fully seat the Airport Extreme card that last fraction of a millimeter; you need to push the card until just short of where the 50-lb eMac is shoved away from you on your work surface.

  • Can't get airport extreme to connect to the internet?

    My sister in law just purchased an airport extreme for her windows pc and when we connect the ethernet from the modem to the airport, the amber light flashes, indicating that it has no connection to the internet. We have rebooted both the airport and the modem, what do we do now?

    Download the setup manual for your AEB here:
    http://support.apple.com/manuals/#airport
    Follow the setup instructions.
    Flashing light could also mean that a firmware upgrade is available for your AEB.

  • Can't get airport extreme to configure as primary or secondary unit in net

    hi
    after my network of various bits & bobs went bottom up i decided to remove everything non-apple.
    i want to now try connecting my A/extreme to the cable modem and then use:
    The ethernet ports to wire in 2 PCs (wife's ) and a network HP Laser.
    The wifi to connect - A Time Capsule ( if possible to extend range of wifi as well as backing up),
    A Mac Mini to act as an iTunes server
    An Apple TV ( fed from the Mac Mini)
    A MacBook Pro,
    I would also like to connect in an xbox360 for occasional online gaming if possible. (wired/wifi)
    The problem i have now seems to be getting the A/extreme to connect via ethernet to cable modem (ntl/virgin media UK). my MBP sees the unit but the AE will not find the internet!!!
    any ideas on how to resolve this issue or go about building the network?

    Most cable modems require that they be reset before they will recognize and communicate with a new device. Have you reset the cable modem?
    Most cable modems reset by simply powering them off and back on.
    Some cable modems contain a small internal battery which must be removed to do the reset.
    Some cable modems have a reset button.
    Some cable modems must be turned off overnight (or at least several hours) so that equipment back at the ISP's office can reset.

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

    when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

    What version of iTunes are you running on your computer? You need to update to the current version.

  • Can you use airport extreme as a bridge to netgear wdnr4500 wireless router

    can you use airport extreme as a bridge with a netgear  wndr4500 router.I need to extend my wireless connections to the other side of the house

    can you use airport extreme as a bridge with a netgear  wndr4500 router.
    This is extremely unlikely. The AirPort Extreme can provide this function with other Apple routers, but as far we know, it is not compatible with products from other manufacturers for this purpose.
    Suggest that you use a Netgear product for the best chance of compatibility.

  • Why does my airport extreme not recognize my cable modem anymore?

    Why does my airport extreme not recognize my cable modem anymore?

    Have you tried resetting the modem? Power it down and let it rest a moment, then power it back up again.
    Also, some ISPs require physically detaching their cable from the modem for it to be fully reset. Literally unscrew it from the modem. Try that, in conjunction with powering it down.
    Don't do anything with your Extreme, other than powering it down too, in the event the modem reset does not help. Reconfiguring it may be necessary but this is not justified quite yet.

  • How can a get my iMAC to recognize a newly installed optical drive?

    I recently ordered a new Optical drive for my iMAC 12,1 to replace a damaged one. I followed the instructions online to replace the drive with no issues. I restarted the iMAC and it will not recognize the new optical drive. The optical drive won't accept any disks either. The optical drive is
    Model GA11N
    Manufacturer: HL
    Condition: Brand New never used, without original manufacturer packaging
    SATA interface, Slot-in loading, 12.7mm in height, without faceplate, no eject button. 1 Year Warranty
    with Apple Logo, Special for Apple iMac Intel 20" EMC 2266 A1224 21.5" 2308 27" 2390 2309 2374 Mac Mini Mid 2010
    Write Speed: DVD-RAM :5X DVD+R :8X DVD+R DL :4X DVD-R DL :4X DVD+RW :8X DVD-R :8X DVD-RW :6X CD-R :24X CD-RW :24X Read Speed: DVD-ROM/DL: 6X CD-R:24X CD-RW: 24X CD-ROM: 24X
    How can a get the iMAC to recognize this new optical drive?

    Here are some sources for Mac compatible optical drives that wiil work with your 2011 iMac.
    http://eshop.macsales.com/item/OWC/VLU2SD24XS/
    http://eshop.macsales.com/item/OWC/MR3F82SD24S/
    http://www.amazon.com/Aluminum-External-Super-Drive-Apple--MacBook/dp/B007FUDKB4 /ref=sr_1_1?s=electronics&ie=UTF8&qid=1392328000&sr=1-1&keywords=mac+compatible+ dvd+drive
    http://www.amazon.com/External-Super-Drive-Apple-MacBook/dp/B009XON646/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1392328066&sr=1-3&keywords=mac+compatible+dvd+drive
    http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_8?s=electronics&ie=UTF8&qid=1392328138&sr=1-8&keywords=mac+compatible+dvd +drive

Maybe you are looking for