Can't get any EPub books to open

My problem is manyfold! I have a Pandigital novel and it can't open any Epub's, not even library books I've checked out. I just uninstalled the most recent version of ADE and loaded the older 1.7 version based on a comment I read in the forum. I used to get a message that said that my device wasn't authorized, but it was authorized within the ADE app. Now I get a message that says that I don't have a license to open the book. I'm assuming that means the same basic thing?? Also, this may seem dumb, but are these books supposed to open in the B &Noble reading app that came pre-loaded on the reader? Or are they supposed to open somewhere else?

What happens when you try to launch Elements Organizer? Was Organizer ever launched on your machine? Can you please verify in  task manager if exe of elements organizer is running?

Similar Messages

  • HT204365 Can't get my ePub book to show up in my library

    I cannot get an ePub book to add on to my Book library on iTunes yet it says I can read them on my iPhone, what am I doing wrong?  I've tried to add it by the file option and by clicking and dragging it to the library and still nothing!

    Did away with it in 10.8. Sync via application Notes now.

  • I can, I can't get my address book to snyc with my ipad2.  I'm using Outlook express 2004.  I followe the steps in itunes, but still no contacts.  Any suggestions?

    Can't get my address book to sync to IPAD2.  Using Outlook Express 2004.  I followed the steps in Itunes, but still not contacts.  Any suggestions?

    Mine is doing the exact same thing, and nobody on any of these threads has had any luck fixing it yet, so far as I can tell. iSync is worthless since it simply won't see the ipod and basically is not used at all now as .mac is done through its own preference window. What did work for me, and was quite easily done, was to just open your ipod through the finder and delete the vcard data in the contacts folder. Export your contacts from address book as a vcard to that contacts folder on your ipod, and it all works fine.
    Still won't sync...but at least this only takes a minute to do. I'd like to actually fix it though.

  • TS4148 The sim card for my new iphone is not working and I can't get the sim card 'drawer' open - also can't get a telephone appointment with apple until Monday evening - any ideas?

    The sim card for my new iphone 4, purchased today, is saying the sim card is not installed.  I have followed the directions included on the support page but have two problems.  1.  I can't open my sim card sleeve with the key and  2.  I can't get any apple support until Monday evening - can anyone help please?

    Hope this photo helps.

  • Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

    Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

    Never mind, I finally got it working, thanks!

  • I have the little plus sign for a new tab, but when I click on it, it won't open. I can't get any additional tabs open.

    I can also right click on the "new tab" sign, and click on new tab and still I can't get a new tab to open. Never had this problem before.

    iirc there is a compatibility issue with the Ask Toolbar, and I think your Sytem Details indicate you may be using that, try disabling or uninstalling the Ask toolbar to see if that solves the problem.

  • I got my Macbook Air from a family member and I can't get my address book on my computer.  What do I do to get the address book on it?

    I purchased an Air Mac and can't get the address book on it.  Does anyone have any ideas on what I should do.  I have an IPhone and an IPad and they both have clouds but I don't see one on my Air Mac.

    From the link posted in TD's reply
    To unhide your purchases
    Open the Mac App Store.
    Choose Store > Sign In, then enter your Apple ID and password.
    Choose Store > View My Account.
    Click on View Hidden Purchases from the Account Information page.
    From the Hidden Purchases page, locate the app you would like to unhide.
    Click the Unhide button.
    LN

  • I can't get pages 5.01 to open pages files from iCloud, although they open in iCloud Pages without difficulty.

    I can't get Pages 5.01 to open Pages files from iCloud, although they open in iCloud Pages without difficulty.
    I am using the most up to date version of Mavericks and Pages and can log into iCloud without any problems.  Is this just a glitch?  The files all behaved properly under previous versions and the initial release of the new version of Pages.

    Pages for iCloud beta is a weird beast and as it says "beta".
    I think it is the least compatible of all the many different .pages files floating around out there.
    Peter

  • How can i get my mac book pro to recognize a JVC camcorder?

    How can I get my mac book pro to recognize a JVC camcorder using a Sony CAMERA USB cord??

    Gotta say thank you — again.  Sorry the posts were spread out over more than one location.    I'll check and see if Third Party Software is considered a "peripheral", maybe that would have been a better single thread choice?
    Definitely news we can use and the reference link is appreciated.
    OT ~ We keep becoming more and more aware of how easy it is to lose one's bearings when it comes to keeping up with info tech.  My husband and I are both official members of the geezer set and have been out of the work force for some years.  You really do pick up so much just by being in the environment where people are using things to get work done.  A couple of old MP3 players, PPC G5, and a vintage Inspiron 3800 that someone didn't want any more is about it.  No cell phone, no iPod, no iPad, no home wireless network, no streaming media.  Fixed income.  So we do with what we can as long as we can.  If we could get by without that Intel processor, we'd probably make do with what we've got.  On the other hand, we've really wanted a notebook for a very long time and have to admit that needing to upgrade to accomodate my husband's project is pretty much just the "reason" we need.  I really mean it when I say that we are beyond appreciative that users take the time to share info and patiently educate those of us who fall into the "slow tech" category. 

  • LR5 won't print, it send print job starts to spool then just dissaperes from the print cue? my printer works fine with other software. I can't get any help from Adobe support can anyone help???

    Hi i need help! I can't print any jobs, LR5 starts to print then the job disappears from the print cue. I can ! print from other application no problem.
    I can't get any support from Adobe. Any ideas would be great.

    Hi,
    Please try the following steps:
    Open the file in Adobe Reader
    Click on File menu - Print
    In the Print Dialog box, select the Printer and then select Advanced button
    In the Advanced print setup, Please check 'Print as Image' (See the Screen shot)
    Click Ok and then Click Print.
    Let me know if this solves the problem.
    ~ Aditya Kalania

  • I can not get my mac book air off mute

    I can not get my mac book air off mute and it is grayed out in the "system Preferance" sound section page.

    OS X Mountain Lion 10.8.3
    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup.app
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so uncheck it.
        Option click the speaker icon, if present and select Internal Speakers.
    6. Install Combo Update ML 10.8.3
    http://support.apple.com/kb/DL1640
    Best.

  • Can't Get Any Guitar Sound

    Hey guys!
    I just got the new Logic Pro Studio yesterday. I'm trying to record some riffs using the amp designer and such. I have my guitar hooked up to a Behringer Guitar Link USB. I set up the proper input and output showing CODEC, but I still can't get any sound from it.
    I thought it was the Guitar Link so I opened Garageband and everything turned out ok.
    Any help would gladly be appreciated.
    Thanks!

    Tony_Premier wrote:
    Hey guys!
    I just got the new Logic Pro Studio yesterday. I'm trying to record some riffs using the amp designer and such.
    Well, do you have headphones or speakers plugged into the Behringer? You aren't by any chance expecting sound to come out of the speakers hooked up to the Mac are you?
    Which version of Logic?
    pancenter-

  • Activated iPhone 4, but can't get any service...just says "Searching..."

    So I purchased an iPhone 4 and activated it with my number.  Verizon account says phone is activated with my number, and I set it up with iTunes and all that good stuff.  However, I can't get any service at all.  The rest of my family all has iPhone 4 and they get 3G coverage in our house no problem, but I can't seem to get service anywhere.  I have tried everything in the book; reset network settings, reset all settings on phone, soft reset, updated to newest IOS, dialed *228 and pressed 2 to get new PRL, turned it on and off multiple times, etc .  Still can't seem to get service, just keeps saying "Searching.." where the bars should be.  Just wondering if there are any other steps I need to take.  Appreciate any and all feedback.

        Hi Snyder23,
    I am sad to hear about the problems with your new iPhone 4! That is a great device. Thanks for all the troubleshooting your have done so far. It appears your phone might be faulty. Are you still within your 14 day Worry Free Guarantee? If so, we can exchange it for another device. If not, you can visit your local Apple store for a hands on evaluation. Keep us posted.
    Thanks, BobbyS_VZW
    Follow us on Twitter @VZWSupport

  • My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

    My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

    Apparently it's related to the Firefox plug in.
    This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
    1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
    2. Select to "Options
    3. Select "Applications"
    4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
    5. Open a test PDF. It should open in it's own window now.
    Again, not a complete solution but something that'll at least let you scroll with PDFs open.
    More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

  • Can anyone recommend any good books on leaning actionscript for flash?

    Can anyone recommend any good books on leaning actionscript
    for flash?
    Intermediate level
    I have been using flash for about 2 years more as a hobby
    than anything else, some websites etc but now I realise I am going
    to need to learn more actionscripting to do what I want, I have
    come to terms with the simple stuff like goto – basic
    variables – load mov – enough to programme up website
    navigation.
    I ideally want to learn more about the dynamic side of flash,
    mostly for designing user interfaces and websites etc
    I’m after a book that doesn’t get too heavy too
    fast yet I’m a little past the more basic functions
    Any thoughts?
    Cheers

    You appear to be stuck on iOS 4.2.1. That means up really have a 2G iPod. A real 3G can go to 5.1.1
    .To find compatible apps more app for 4.2.1 see:
    Old Apps
    VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
    apps for ios 4.2.1: Apple Support Communities
    Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
    HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
    apps for 4.2.1 (also works for 3.1.3)
    Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
    4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities

Maybe you are looking for

  • Restriction of Validity start date in Scheduling agreement

    Hi, I am not able to convert the message 06 170( Start of validity period is in the past) in error message , when i am going to define attributes of system messages in purchasing and converting this message into error , system still does not give err

  • Filter (variable) applied at analytical view is not reflected in Caculation view.

    Hello All, I am new to hana and would like to discuss one issue here. Model is something like this: Calculation  view  ---- >   has one Analytical View  --->  has one attribute view and a fact table. Now, in analytical view I have applied a filter us

  • Laptop G570 not connecting to TV

    I have a Lenovo G570 with no HDMI but with VGA. I bought this computer in Sep/2011. I got a cable with a VGA on one end and a HDMI on the other. I connected them to their respective place, changed the input on the TV to HDMI1 and... NOTHING! What is

  • IPhone 4S is dead -- why?

    It worked fine earlier today.  Then a couple hours later I went to it and it was totally dead.  I plugged it into its charger -- nothing.  I left it charging for five hours & still nothing.  I held down the on/off button for 12 seconds - nothing.  I

  • Server farm upgrade advice

    We would like to upgrade our network that supports our server farm(about 25 servers made). Mostly web and SQL databases. attatched is a diagram. Currently we have 2 2811 routers running BGP. Each is connected to a different ISP; one via T1, the other