Can't get any response from the Tuner - is it broken?

I'm happily chugging away through my new David Nahmani tutorials and I've discovered that I can get no response from the Tuner. The controls in the window appear to be working, but no line appears in the meter and flat lines appear in the center for pitch and octave. The channel strip indicates normal sound input and variation. I don't have any trouble recording (so far anyway). Is there anything I'm not aware of that could cause this?

Thanks for the reply, Rob. I'm just trying to tune a wind instrument through the built-in mic on my MacBook Pro, but I discovered the answer not too long after submitting the question. As I said, I'm trying to work through the Nahmani Logic Pro and Logic Express 8 book. I've been trying to be very meticulous about the installation and the setup for the tutorials, but I guess I inadvertently made settings changes that interfered with the Tuner, because choosing Logic Express > Preferences > Initialize All Except Key Commands allowed the Tuner to work the way I expected. I assumed the problem must have been bus related after I saw the Tuner respond to internal playback after modifying some bus settings, so I executed that command and all was well (uh, I should probably change that to "most was well", but at least the Tuner is working now). Thanks again.

Similar Messages

On my Iphone 4, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. help?

On my Iphone 4s, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. A few days before that the speaker suddenly stopped working during a call. I also reset everything by connecting to itunes but no luck then. help?

Hey there xntricj,
It sounds like you are putting a password for your Apple ID that works without issue on your iPad into your iPhone but get a message saying that the password is incorrect. I recommend the steps from the article named:
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
After completing iOS 7 setup, go to Settings > iCloud.
Scroll down and tap Delete Account, then enter your previous Apple ID and password.
If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Can't get any response from HttpsURLConnection

sorry, i've reformat the code here again
Deal frens,
Currently i'm doing a code to get a response from https link in my servlet. I don't know where the lack of my coding, but i don't get any response from the server when i execute my code. here is my code
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.net.ssl.*;
public class Servlet1 extends HttpServlet {
private static final String CONTENT_TYPE = "text/html";
//Initialize global variables
public void init() throws ServletException {
//Process the HTTP Get request
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
    response.setContentType(CONTENT_TYPE);
    PrintWriter out = response.getWriter();
    String authentURL = "https://server1.tst.cvs/servlet/RequestHandler?login=admin&pwd=admin&method=viewUser&username=00032a0183db";
    out.println("<html>");
    out.println("<head><title>Servlet1</title></head>");
    URL url = new URL(authentURL);
    HttpsURLConnection URLconn = (HttpsURLConnection) url.openConnection();
   // HttpsURLConnection conn = null;
    URLconn.setDoInput(true);
    URLconn.setDoOutput(true);
    URLconn.setRequestMethod("GET");
    URLconn.setUseCaches(false);
    OutputStream authOut = URLconn.getOutputStream();
    BufferedReader reader = new BufferedReader(new InputStreamReader(URLconn.getInputStream()));
    out.println("<body bgcolor=\"#ffffff\">");
    out.println("<p>The servlet has received a GET. This is the reply.</p>");
    out.println("output"+authOut);
    out.println("output2"+URLconn.getContent().toString());
    out.println("output3"+reader);
    out.println("</body></html>");
//Clean up resources
public void destroy() {
} the result suppose i get when i execute the script is..
userdata=234&uname=00032a0183db&concurrentlogins=1
i don't have any problem when i paste the link
https://server1.tst.cvs/servlet/RequestHandler?login=admin&pwd=admin&method=viewUser&username=00032a0183db
and i able to get the response
userdata=234&uname=00032a0183db&concurrentlogins=1
please..please help..what is wrong with my code

YOU DON'T READ ANYTHING IN YOUR CURRENT CODE !!!
If you use a BufferedReader, then read the input stream via readLine() method.
Default implementation of getContent() method is not generally usable for getting your desired "content". Experiment that.

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

It kept bugging me so I upgraded to ITunes 10.4.1. Now I can't get any sound from the internal speakers or my headphones. Any ideas?

I'm using a Macmini with Snow Leopard. Everything is up-to-date according to the software updates manager. Can I go back to the previous version? I work from home and have very noisy neighbors so my music allows me to stay focused. Thanks for any suggestions.

Two suggestions:
1. Check iTunes volume (the slider left of the progress bar). It's separate from the system volume.
2. Often, speaker problems can be resolved by resetting your computer's PRAM. This explains how: Resetting your Mac's PRAM and NVRAM, http://support.apple.com/kb/ht1379

ANYBODY GETTING ANY RESPONSE FROM THE MODERATORS?

Hopefully the subject line asks the question.
I see lots of users trying to help other users......BUT WHERE IS THE "OFFICIAL" HELP?

take on board what you say about Sky.
still have trouble after 18 months getting SkyGo onto Tab 2.
Their moderators limp along saying "it's on the roadmap, bla bla bla" but nothing after 18 months...Seriously!
I'm getting de ja vu.
I would at least expect some intervention or help or advice (practical please...not the call centres...not emailing bt care....don't get replies.
I wouldn't want this forum to be just a place to sound off...Expect some help from your peers but DEFINITELY NEED OFFICIAL HELP IN RESOLVING ISSUES
my message to them is....don't be as customer offensive as Sky.... BELIEVE IN BETTER

LR5 won't print, it send print job starts to spool then just dissaperes from the print cue? my printer works fine with other software. I can't get any help from Adobe support can anyone help???

Hi i need help! I can't print any jobs, LR5 starts to print then the job disappears from the print cue. I can ! print from other application no problem.
I can't get any support from Adobe. Any ideas would be great.

Hi,
Please try the following steps:
Open the file in Adobe Reader
Click on File menu - Print
In the Print Dialog box, select the Printer and then select Advanced button
In the Advanced print setup, Please check 'Print as Image' (See the Screen shot)
Click Ok and then Click Print.
Let me know if this solves the problem.
~ Aditya Kalania

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

I can't get any sound from ITunes. The computer's internal speakers are fine (they play utube sound, for example). And the sound bar on itunes is all the way to the right. Still no sound from the music library. Any insights?

I can't get any sound from my ITunes library. The IMac is set to internal speakers, the volume bar on ITunes itself is all the way to the right, there seems to be no problem with the speakers themselves (they play sound from internet videos, for example), but I can't play music from the ITunes library on the IMac. Please help!

Is it possible that you have iTunes set to send audio through AirPlay to an AirPort Express, Apple TV, or other AirPlay device (which is itself not turned up so you can hear it)?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

I bought and was charged for bingo chips in bingo bash and have not received the chips.. I can't get a response from bingo bash! How do I get my chips?

I bought and was charged for bingo chips in bingo bash and have not received the chips.. I can't get a response from bingo bash! How do I get my chips?

Welcome to the Apple Support Communities
If I have understood you properly, to do that, you have to create a new administrator user with your name and for your uses. Follow these steps:
1. Open System Preferences > Users & Groups, and press the + button to create a new administrator account.
2. When you have finished creating that user, open  > Log Out, and log in your new user.
3. Open System Preferences > Users & Groups, select the old user and press the - button to remove the user. If you want, you can select the option to remove the Home folder of this user, so you will only have the Home folder for your account

WIRE DOWN: Can't get any response to a wire down.....

It is virtually impossible to report a Verizon wire/cable down. It took me nearly an hour to find a number. Verizon sites have nothing. I finally got a number from Ask.com.
I reported the wire down; explaining that I had called the localelectric utility. They were there in 30 minutes - but they said they can't repair the line, as it is a Verizon cable that is down. Apparently, since the service is not OUT - they don't seem to care.
Wire is hanging from pole line...about 6 ft. off the ground. I reported - Ticket number: {edited for privacy}; but nobody came.
Getting a response from the Maryland Public Service Commission is almost as bad. What gives??

Hi PoppyBaze,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan

How to change read only folders into normal ones...i can't get any filed from my harddrive

how to change read only folders into normal ones...i can't get any filed from my hard drive..it shows read only

Which HDD are you referring to, an external one, or the internal SSD?
If external, which format is it in?

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

Can't get any response from the Tuner - is it broken?

Similar Messages

Maybe you are looking for