Can't Get Anywhere in Windows 2003 VPN System with AE 2009

Hi,
This is driving me nuts, and I'm wondering if anyone can help.
Since purchasing a new 2009 Airport Extreme, I can't see any servers when logged into my company's Windows 2003 VPN system. I log on and authenticate fine, it looks like I see the VPN system's DNS servers, and I'm assigned an IP address, but I can't get to any volumes, nor can Safari get to the company intranet. When I switch back to my old Linksys router, VPN works normally, so I know the issue is the AE.
My sysadmin doesn't have much info on port mapping, just a 1723 public TCP port.
I've spent hours on the Web looking for info, and don't want to return the AE, but I'm I'll have to if I can't get this resolved.

I found this in another thread, and it worked:
SOLUTION:
It turns out that a co-worker of mine had the same problem in the past...and the solution couldn't be simpler. It turns out that:
1. the AP Ext DHCP defaults to assigning IPs based using 10.0.x.x addressing
2. my work network tries to use the same addressing scheme.
Therefore, I had to change the AP Ext base addressing to 192.168.x.x
STEP BY STEP SOLUTION:
1. Open Airport Utility
2. Click on the "Internet" tab at the top
3. Click on the "DHCP" tab within that window
4. Change the value of "DHCP Beginning Address" from "10.0" to "192.168"
5. Click Update. You AP Extreme will reboot and once back up, should work fine with your VPN (if you're lucky enough to have similar configuration as mine on your work end of things)
THIS SOLUTION DOES NOT REQUIRE
Assigning a DHCP IP Reservation
Enabling a default host on the NAT
Port Mapping

Similar Messages

How can i get back to windows 8 if i downgrade my laptop to windows 7

My laptop was been downgrade from windows 8 to windows 7because of graphics not funtioning properly. how can i get back to windows 8 again? is there a recovery disc for this?

Hi:
Did you install the correct W7 x64 graphics driver that should work on your model?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=us&dlc=en&lc=en...

How can I get my hp Laserjet 1012 to work with Windows 7?

How can I get my hp Laserjet 1012 to work with Windows 7?

Here is a list of products that are not supported in the win7 OS. This product is listed there.
Products not supported in win7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Where can i get a FRESH Windows 8 iso? (LEGALLY)

Hey guys,
I wanted to know where you can get a Windows 8 iso, NOT a upgrade iso.
I already did some googleing, and http://www.redmondpie.com/download-windows-8-iso-x86-x64-file-directly-from-micr osoft/ this website seemed to tell me you can get it by downloading a file from Microsoft and just entering a product Key.
However, for this i think you actually need a Windows 7 , because it is an UPGRADE iso, not a fresh system-builder iso.
So i was wondering, where can you get a fresh Windows 8 iso to install on my MacBook, which doesn't have Windows 7?
Or can you use the iso described in remondpie and use it to install Windows 8?
Thanks!
PS According to many people, the new MAcBook Air (2013) which i have does not work really well when you install windows with a CD. That's why i'm trying to use a USB and iso to download it.

iso is just a 100% bit by bit image of an optical disc
there are millions of free programs which will make an iso file out of an optical disc in a few minuts

How can I get rid of windows 8.1 in my new lenovo and get windows 7 put in?

How can I get rid of Windows 8.1 on my new Lenovo laptop and install Windows 7?

Hi,
I'll assume your laptop was upgraded from Windows 7 to Windows 8.1
1. Start by copying all your personal folders (Documents, Pictures, Music, Videos, Favourites, local databases,
hosts files, etc) into an external disk, DVD, tape, whatever.
2. If I were you, I wouldn't use Windows 8.1 backup tool, I'm not sure Windows 7 Restore applet will be able
to read a Windows 8.1 backup.
3. Check that you have all the necessary licenses, CDs and executables to reinstall your former Windows 7
applications, components, browsers, plugins, Java, .NET Frameworks, etc. Be aware that some applications require
to keep same hostname and/or same IP and/or or same local username (or all of them) as they were on the original
Windows 7 machine.
4. Check that you have your Windows 7 CD and license handy.
5. Do you have a Windows 7 image backup of your laptop (prior to the Windows 8 upgrade)?
5.a Yes? Then restore that image and restore your personal folders on top. You might need to
install or reinstall some of the applications I mentioned on #3
5.b No? You'll have to format your laptop, install Windows 7 from scratch, create your local
user with administrative rights, install SP1, install necessary updates, reinstall all your
applications and finally restore your personal folders.
Sebastian Sajaroff Senior DBA Pharmacies Jean Coutu

How can I get a small window to open when a link is clicked (AS2)

Hi i,m developing a HTML site and used one animated flash button(AS2) I want a small sized window to open when a user clicks on a button.
The window will contain information that i want to display.It dosnt require a normal 800x600 window to open. I just want a 1/4 size of 800x600 etc. Is this possible and if so how.
I havnt done this before
Thanks
Manoj

HELLO NED,
I WAS RECEIVING MANY MAILS FROM YOU, BUT I DON'T UNDERSTAND WHY DOESN'T RELATED WITH MY PETITION, I SEND
TO YOU AGAIN MY QUESTION, AND IF YOU CAN HELP ME I APPRECIATED VERY MUCH LET ME KNOW.
THIS IS MY QUESTION....."ABOUT DATAGRID AS3
Hello Ned, I appreciate very much your soon answer, I believe you have understand me, but how can I do that? could you give some help? This is part of the code and this is the function that I use
var url: String = "xmls/rests.xml";
var req:URLRequest = new URLRequest(url);
var myLoader:URLLoader = new URLLoader();
myLoader.addEventListener(Event.COMPLETE, completeHandler);
myLoader.load(req);
function completHandler(event:Event):void {
       var myLoader:URLLoader = event.currentTarget as URLLoader;
       var xmlDP:XML = new XML (myLoader.data);
       XML.ignoreWhitespace = true;
       dp = new DataProvider(xmlDP);
       dp = sortOn("name", Array.CASEINSENSITIVE);
       dDg.dataProvider = dp;
       aDg.addEventListener(Event.CHANGE, changeHandler);
       function changeHandler(event:Event): void {
            var thisItem:Object = eve.target.selectedItem;
            descripTa.text = thisItem.description;
            aUI.source = (thisItem.image);
            preloader_mc.visible = true;
My intention is that when a button from a main (swf) loads the swf it displayed the first selected item with a image (UILoader) and the description (TextArea)
Thanks in advance Ned
Joselyn             .................."
THANKS AGAIN NED
REGARDS
JOSELYN
Date: Thu, 13 Oct 2011 07:49:02 -0600
From: [email protected]
To: [email protected]
Subject: How can I get a small window to open when a link is clicked (AS2)
Re: How can I get a small window to open when a link is clicked (AS2) created by Ned Murphy in Flash Pro - General - View the full discussion
Look at the Methods section and choose whichever suits your needs, the first one listed does not.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969302#3969302
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969302#3969302. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT201184 how can i get my google window back in the upper right hand corner. It disappeared.

how can I get my google window back in the upper right hand corner of my start page? I seem to have lost it.

Control click in the tool bar area and customize.

Updated Java (13.5) and can't get a Firefox window (mac, 10.6.8)

My MacBook pro suggested I update to the most recent version of Java. after doing so, I can't get a firefox window on opening firefox or on requesting a new window. If I click on a link I get a window.
what'sup?
New java is 13.5 Firefox is 3.6.18 Mac is 10.6.8

If you have access to an Apple Store, the Genius Bar should be able to manually install a version that works with your Operating System.
Be sure to make an appointment though.
AppleCare should be able to help you as well.
You could also try that Express Lane option in the upper right corner of this page:
http://http://www.apple.com/support/iphoto/
Better yet:
http://www.apple.com/support/mac/app-store/

Can I get rid of windows 8 and just go back to OS X

Can i get rid of windows 8 and just go back to OS X.

Here are two links explaning the deletion of Boot Camp and reclaiming the space it occupied.
http://www.simplehelp.net/2009/01/26/how-to-delete-a-boot-camp-partition/
http://applegrad.com/blog/post-41624387753

I have a new iPhone. I want to transfer Notes from an iPod Touch 3 to my iPhone using iCloud but I can't get anywhere. Help.

I have a new iPhone and I want to transfer my Notes from an iPod Touch 3. I've tried using iCloud but can't get anywhere. Help.

Since you have purchased a new Mac (which, BTW, is not typed in all capitals) why not buy a Time Capsule <http://www.apple.com/airport-time-capsule/> which is designed specifically to work with OS X and Time Machine?
You don't say what part of your Sony "crashed." If it was not the HDD it is possible to take the computer apart, put the HDD in an external case, then recover the data off of it (including the music) simply drag-n-drop. If it was the HDD that "crashed" that makes it more difficult.
If you are able to recover the music from the Sony you can then add it to the iTunes library on the Mac and iTunes Match will then scan, match and upload the tracks to be mirrored in the cloud.

Can you get iChat for windows or is it just for macs???

Is iChat just for mac's or can you get it for windows?? and if so how?

Hi
AIM 5.9 is here
They do need to be using XP
They do need to "tune" the camera and mic to the AIM Application
They need to allow the application as an exception through the XP firewall
http://www.ralphjohnsuk.dsl.pipex.com/page12.html#_Service
This site says it in a lot more detail
http://www.mvldesign.com/videoconferencetutorial.html
If you really want to make this work.
Page 5 on my site lists other options of Mac to PC video chats including the Skype option
10:21 PM Wednesday; February 14, 2007

HOW CAN I GET LINE IN ON SOUD IN SYSTEM PREFERENCE I NEED TO CONNECT MY GUITAR.

HOW CAN I GET LINE IN ON SOUD IN SYSTEM PREFERENCE I NEED TO CONNECT MY GUITAR.

Please do Not type in ALL CAPITALS. It is considered shouting in online communications. Now, in System Preferences, click on "Sound", and in that window click on the "Input" tab shown below. Then in the list below that click on "Line In." That will activate the Audio Line-In Port.

Just upgraded to ios 8.1.3 but can't get my contacts or calendar to sync with my iPhone 5S

just upgraded to ios 8.1.3 but can't get my contacts or calendar to sync with my iPhone 5S - any help would be appreciated

I found a solution that worked for me:
What I did:
1. Uninstalled iTunes, but didnt need to remove other related software components
2. Downloaded and installed iTunes from here (as you suggested): iTunes 12.1 for Windows (64-bit — for older video cards)
3. I didnt have to reset Sync History or change anything and it works!
Hope it can help you too.

Can I get the detecting malware alert by System Center 2012 Endpoint Protection in Azure RemoteApp ?

Can I get the detecting malware alert by System Center 2012 Endpoint Protection in Azure RemoteApp ?
I want to get the alert and cleanup malware and alert our Azure RemoteApp users.
the System Center 2012 Endpoint Protection exist Azure Virtual Machine gallery "Windows Server Remote Desktop Session Host”.
I test the behavior of System Center 2012 Endpoint Protection by TrendMicro Malware sample "EICAR".
Regards,
Yoshihiro Kawabata

Thank you Pavithra for reply.
I have 3 points for alerting users and admins of Azure RemoteApp template image.
point 1: Fix action.
  When the user detect a malware, There are some reasons,
like viewing a malicious web site, like using the vulnerable applications.
  The User must fix his action in Azure RemoteApp session.
"Hey, the reason is that you open this web site, Don't open this web site"
point 2: Fix server.
When the user detect a malware, ITpro of Azure RemoteApp fix the current Azure Virtual Machine of Azure RemoteApp.
  There may be infected with other malwares.
ITpro need to fix the current Azure Virtual Machine of Azure RemoteApp before infecting other users.
"Hey, This Azure RemoteApp collection will update with the template image after ten minutes."
point 3: Fix damage.
When the user detect a malware, ITpro of Azure RemoteApp research the damage of all system,
like whether or not sent the infected email to other persons by other malware,
like whether or not broken other related systems by other malwares.
"Hey, Are other systems OK ?"
Regards,
Yoshihiro Kawabata

Just tried setting up bootcamp on MacPro. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

Just tried setting up bootcamp on 2014 MacPro 13" laptop. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

Hi there rjr25350,
You may find the information in the article below helpful.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
-Griff W.

Can't Get Anywhere in Windows 2003 VPN System with AE 2009

Similar Messages

Maybe you are looking for