Can't get Automate/Batch to work properly

I'm trying to get all images in a folder to change their size and resolution. I've created the following automation:
All it does is open and close. It doesn't change the size or resolution. When running the batch I have the "new" images saved to a different folder.
I've followed examples but to no avail.
Frustrated......

Do you have the 12.0.1 update for Photoshop installed? It fixes several issues with Batch and droplets.

Similar Messages

  • How can i get the speakers to work properly? they have a lot of static and scratchiness from them

    how can i get the speakers to work properly, they have a lot of static and scratchiness coming from them?

    I found my answer in this thread:
    https://discussions.apple.com/message/16646999#16646999

  • I REALLY hate the page up/page down functions that automatically loaded with the program. I LIKE to use my page up/page down keys for web browsing. How can I get these keys to work properly, or any of the keys to work "normally" as I have in the past?

    When using certain keys on my keyboard, they don't work like they are "intended" to be used. I HATE how Firefox has changed those functions without my request. How can I get my keyboard to function as it "should"?
    Thank you.

    When using certain keys on my keyboard, they don't work like they are "intended" to be used. I HATE how Firefox has changed those functions without my request. How can I get my keyboard to function as it "should"?
    Thank you.

  • Can't get IR receiver to work properly

    First to state out, I have read the wiki like 10 times and googled for a couple of hours without getting this to work.
    If I start "sudo mode2" I get alot of output when enter the buttons. But I had to change "ir-table -p LIRC" before that worked.
    I have added the following to /etc/rc.local
    echo lirc > /sys/class/rc/rc0/protocols
    I've done "sudo modprobe mceusb" and also tried "modprobe evdev"
    I've added this to my /etc/conf.d/lirc:
    #Parameters for daemon
    LIRC_DEVICE="/dev/input/by-id/usb-FINTEK_eHome_Infrared_Transceiver_88636562727801-event-if00 "
    LIRC_DRIVER="devinput"
    LIRC_EXTRAOPS=""
    LIRC_CONFIGFILE="/etc/lirc/lircd.conf"
    But further than that I can't get. I've tried to download a /etc/lirc/lirc.conf for my Harmony 525 but it dosn't work. Nor to the irrecord command give me any file!
    When I run the "# irrecord -d /dev/lirc0 /tmp/my_remote" i get, (but no file at all!):
    Press RETURN now to start recording.
    Found gap: 75504
    Please keep on pressing buttons like described above.
    RC-6 remote control found.
    Found possible header: 2816 286
    Header is not being repeated.
    No repeat code found.
    Signals are biphase encoded.
    Removed header.
    Signal length is 36
    Checking for toggle bit mask.
    Please press an arbitrary button repeatedly as fast as possible.
    Make sure you keep pressing the SAME button and that you DON'T HOLD
    the button down!.
    If you can't see any dots appear, then wait a bit between button presses.
    Press RETURN to continue.
    No toggle bit mask found.
    But I know for sure that RC6 has a toggle bit!
    Here's some info that perhaps can help
    uname -r
    3.2.8-1-ARCH
    lircd --v
    lircd 0.9.0
    cat /proc/bus/input/devices:
    I: Bus=0003 Vendor=046d Product=c30e Version=0110
    N: Name="Logitech HID compliant keyboard"
    P: Phys=usb-0000:00:06.0-6/input0
    S: Sysfs=/devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6:1.0/input/input0
    U: Uniq=
    H: Handlers=kbd event0
    B: PROP=0
    B: EV=120013
    B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
    B: MSC=10
    B: LED=7
    I: Bus=0003 Vendor=046d Product=c30e Version=0110
    N: Name="Logitech HID compliant keyboard"
    P: Phys=usb-0000:00:06.0-6/input1
    S: Sysfs=/devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6:1.1/input/input1
    U: Uniq=
    H: Handlers=kbd event1
    B: PROP=0
    B: EV=13
    B: KEY=fff ffffffffffffffff 2000000 387ad800d001 1e000000000000 0
    B: MSC=10
    I: Bus=0019 Vendor=0000 Product=0001 Version=0000
    N: Name="Power Button"
    P: Phys=PNP0C0C/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    U: Uniq=
    H: Handlers=kbd event2
    B: PROP=0
    B: EV=3
    B: KEY=10000000000000 0
    I: Bus=0019 Vendor=0000 Product=0001 Version=0000
    N: Name="Power Button"
    P: Phys=LNXPWRBN/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    U: Uniq=
    H: Handlers=kbd event3
    B: PROP=0
    B: EV=3
    B: KEY=10000000000000 0
    I: Bus=0019 Vendor=0000 Product=0006 Version=0000
    N: Name="Video Bus"
    P: Phys=LNXVIDEO/video/input0
    S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input4
    U: Uniq=
    H: Handlers=kbd event4
    B: PROP=0
    B: EV=3
    B: KEY=3e000b00000000 0 0 0
    I: Bus=0010 Vendor=001f Product=0001 Version=0100
    N: Name="PC Speaker"
    P: Phys=isa0061/input0
    S: Sysfs=/devices/platform/pcspkr/input/input5
    U: Uniq=
    H: Handlers=kbd event5
    B: PROP=0
    B: EV=40001
    B: SND=6
    I: Bus=0003 Vendor=1934 Product=5168 Version=0001
    N: Name="Media Center Ed. eHome Infrared Remote Transceiver (1934:5168)"
    P: Phys=usb-0000:00:04.0-6
    S: Sysfs=/devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/rc/rc0/input6
    U: Uniq=
    H: Handlers=kbd event6
    B: PROP=0
    B: EV=100013
    B: KEY=fff 0 200108fc32e 237605100000000 0 700158000 419200004001 8e968000000000 10000000
    B: MSC=10
    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="MCE IR Keyboard/Mouse (mceusb)"
    P: Phys=/input0
    S: Sysfs=/devices/virtual/input/input7
    U: Uniq=
    H: Handlers=kbd mouse0 event7
    B: PROP=0
    B: EV=100017
    B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
    B: REL=3
    B: MSC=10
    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="HDA NVidia Headphone"
    P: Phys=ALSA
    S: Sysfs=/devices/pci0000:00/0000:00:08.0/sound/card0/input8
    U: Uniq=
    H: Handlers=event8
    B: PROP=0
    B: EV=21
    B: SW=4
    dmesg | grep ttyS
    [ 0.532104] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.707341] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ls /sys/class/rc/rc0
    device input6 lirc0 power protocols subsystem uevent
    ls -l /dev/input/by-id
    lrwxrwxrwx 1 root root 9 Mar 6 19:38 usb-FINTEK_eHome_Infrared_Transceiver_88636562727801-event-if00 -> ../event6
    lrwxrwxrwx 1 root root 9 Mar 6 19:38 usb-Logitech_HID_compliant_keyboard-event-if01 -> ../event1
    lrwxrwxrwx 1 root root 9 Mar 6 19:38 usb-Logitech_HID_compliant_keyboard-event-kbd -> ../event0
    Last edited by Chrilleee (2012-03-06 19:53:29)

    Think I've found something more than can cause this problem, I want to run my Harmony as a "MCE Keyboard", not an "MCE Remote" (which I finally got to work).

  • How can I get cursor keys to work properly in Excel under Mavericks?

    I recently upgraded from Snow Leopard to Mavericks on a 24" iMac, with  wired Apple USB keyboard and mouse. The cursor keys do not work properly in Excel 2011 - instead of navigating through the spreadsheet, they move the spreadsheet up, down, or sideways within the active window. Booting in safe mode did not help. All software is up to date. The cursor keys work as they should in other apps. I have also tried this with peripherals disconnected but that made no difference. Suggestions, anyone?

    Need more information. The drop down calendars are a custom JavaScript that has been developed by a number of different people and use many different methods so without which one and how you implemented it ion the form it hard to determine what is going on.

  • I can't get my recording to work properly. I have been on hold for 55 minutes and I need help

    Please someone help me. I have been on hold for ever.
    I am writing a project where student are being shown how to create tables in Word. But when I do the recording the recording are screwed up and I can't get student to enter in the text I need them to enter. This project has to be done tonight.
    Please advise

    Rod meant sharing the screenshot on this post, which you can do by clicking the tiny camera icon. Rod is not an Adobe employee (nor me).
    Sreekanth

  • ACL and posix conflict? Can't get folder access to work properly

    We have a folder on our website that all employees need to be able to write to, but they do not need to be able to create folders or delete anything. There is a second group with full permissions to the folder.
    ACLs:
    Upload Full Access - R&W
    Company Access - Custom (full read, write does not include: create folder, delete, delete subfolders and files)
    POSIX:
    O: _www : R
    G: Company Access : R
    E: None
    The full access group is easy and works perfectly.
    The limited group is a pain and the permissions don't work 100% the way needed.
    With that setup, they cannot create new files at all.
    If I set G: R&W, then they have free reign as the ACL is being ignored.
    If I set G: R, then they have no write abilities as the ACL is being ignored.
    With either group setting if I grant "create folder" permission in the custom ACL, then users can create folders and they have full create/delete permissions within the new folders, but this is what I need to prevent not allow.
    I've never had problem setting up a share with strange ACL access permissions before. Does this directory hate me? I'd like to do this without having to create another user group.
    Suggestions?

    Hi,
    Yes, the GUI of ServerAdmin won't add the <Directory> config sections to the apache config file. Read about that <Directory> config section, look at /etc/apache2/httpd.conf and /etc/apache2/sites/0000SOMETHING.
    The good news is once you put the <Directory> config sections in there, it will stay there.
    In someways the GUI of ServerAdmin is bad, in that it is just adding text lines to your apache config file, and it doesn't alway know what to add, whereas if one must do one's own typing in the config file, then one is aware of what is in there, what it is doing.
    I ran into a similar issue. But do read the config files, and the apache.org documentation. It is good documentation, and the config files are pretty clear to follow.

  • How can i get my ipod to work properly?

    My ipod is not charging at all when connected to the adapter or to my mac. when i connect to the charger either the battery sign comes up with the connect to power symbol. or the apple sign keeps flashing on and off. it doesnt charge. I already tried to reset it but it doesnt let me. I need help?

    I'm assuming from what you have said that your iPod is in recovery mode. This is the logo that says connect to iTunes. Hold the home and sleep button down for 10 seconds and the device will be in recovery mode.
    Try plugging the iPod into a different computer with iTunes installed and you might be able to restore your iPod. If this doesn't work take it to an Apple store and they will be able to help you.

  • Can't get ReportUI portlet to work properly

    Hi, I've got a BI EE installation up and running. Now I tried to use the ReportUI portlet in another machine that runs an Oracle Portal (within an Application Server 10.1.2.0.2 installation). As the how-to, I used this documentation (pages 199-204): http://download-uk.oracle.com/docs/cd/B40078_02/doc/bi.1013/b31766.pdf
    For testing purposes, I went the non-SSL way. I got as far as deploying the portlet and adding it to a portal page, but when I open this page, the portlet gives the following message:
    Authentication error. Details: An invalid User Name or Password was entered.
    This messages implies that the config file portlet.xml contains wrong values, but this is not true: username, password and hostname are correct. I couldn't find any hints on this problem, neither MetaLink nor in this forum, so I decided to open this thread.

    Matthias,
    Can it be that you have to run some tool to encrypt the password in the XML file first? I have never done this, but it sounds like it could be the next step. I haven't looked at the docs you mentioned, so my apologizes if this is a dumb suggest :)
    Did you put the loglevel of the Administrator user to 5 and look at the log?
    Borkur

  • Can't get JDK6 docs to work properly

    I just downloaded and unzipped the JDK6 documentation, however when I launch the index.html file in my IE7 browser and click any of the links I get an "Error on page." Any suggestions?

    Also, if you could post the href property of the A
    tag of any of the links.<A href="someUrl">this
    is the link text</A>The href, or target url
    may be another html file but from the error you're
    getting, I suspect it is a JavaScript function.
    If so, you could also try a text search to locate
    that function and see what it does (or doesn't).
    If it is not found, check whether there are any links
    to external .JS files in the <HEAD> of index.html
    DarrylNo .js files in the <head>. It looks like the error is occurring somewhere in this block of code:
              <td class="tdbody" bgcolor="#E8FA71"
                  onmouseover="this.bgColor='#CCFFDD'; style.cursor='pointer'"
                  onmouseout="this.bgColor='#e8fa71'"
                  title="Java runtime launcher"
                  onclick="location.href='technotes/tools/windows/java.html';">
             <a href="technotes/tools/windows/java.html" class="atext" alt="Java runtime launcher">
                java </a> </td>I believe the error is caused by some kind of active content being blocked because not even the .gif images are showing.

  • Can't get my hyperlinks to work...

    Hi Everyone, I am hoping someone can help me....
    I am not very computer savy so if you could answer in the simplest way you know how would be awesome!!
    I can not seem to get my hyperlinks to work on my website, they work when I am editing the website but not once I go to the published version...
    I have been into the inspector and set up the hyperlink for each one but still no luck. If its any help my website is www.bearsbybecca.com
    I rang the apple help line first but he told me he couldn't help??
    I am hoping someone can help me!
    thank
    bec

    I have solved my first question
    This:
    txt.setNewTextFormat(css._css.input);
    - has to be:
    txt.setNewTextFormat(css._styles.input);
    In the secound question I still can't get my hyperlinks to
    work properly... Please help :)

  • Can't get direct rendering to work

    On my notebook with an Intel 945GM card, I can't get direct rendering to work.
    I'm using the 'xf86-video-intel' driver.
    /etc/X11/xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Touchpad" "AlwaysCore SendCoreEvents"
    # InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
    Option "DontZap"
    Option "DontZoom"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "xtrap"
    Load "extmod"
    Load "GLcore"
    Load "record"
    Load "dbe"
    Load "glx"
    Load "dri"
    Load "freetype"
    Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "InputDevice"
    Driver "synaptics"
    Identifier "Touchpad"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.06"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0010"
    Option "SHMConfig" "on"
    # Option "Repeater" "/dev/ps2mouse"
    EndSection
    Section "Monitor"
    #DisplaySize 330 210 # mm
    DisplaySize 338 211
    Identifier "Monitor0"
    VendorName "AUO"
    ModelName "2174"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    And here is /var/log/Xorg.0.log:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-ARCH i686
    Current Operating System: Linux zg6y3zg9f3x 2.6.24.3-ARCH #2 SMP PREEMPT Sun Mar 2 23:22:11 CET 2008 i686
    Build Date: 03 February 2008 02:54:48PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 3 00:20:16 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Touchpad"
    (**) |-->Input Device "Keyboard0"
    (**) Option "DontZap"
    (**) Option "DontZoom"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (==) |-->Input Device "Mouse0"
    (==) The core pointer device wasn't specified explicitly in the layout.
    Using the first mouse device.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d65c0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,27a0 card 1025,0090 rev 03 class 06,00,00 hdr 00
    (II) PCI: 00:02:0: chip 8086,27a2 card 1025,0090 rev 03 class 03,00,00 hdr 80
    (II) PCI: 00:02:1: chip 8086,27a6 card 1025,0090 rev 03 class 03,80,00 hdr 80
    (II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0090 rev 02 class 04,03,00 hdr 00
    (II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0090 rev 02 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,27ca card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:3: chip 8086,27cb card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,27cc card 1025,0090 rev 02 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0090 rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0090 rev 02 class 01,01,80 hdr 00
    (II) PCI: 00:1f:3: chip 8086,27da card 1025,0090 rev 02 class 0c,05,00 hdr 00
    (II) PCI: 05:00:0: chip 8086,4222 card 8086,1000 rev 02 class 02,80,00 hdr 00
    (II) PCI: 06:01:0: chip 14e4,170c card 1025,0090 rev 02 class 02,00,00 hdr 00
    (II) PCI: 06:04:0: chip 1524,1412 card 1400,0000 rev 10 class 06,07,00 hdr 82
    (II) PCI: 06:04:1: chip 1524,0530 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: 06:04:2: chip 1524,0550 card 1025,0090 rev 01 class 08,05,01 hdr 80
    (II) PCI: 06:04:3: chip 1524,0520 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: 06:04:4: chip 1524,0551 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 5: bridge is at (0:28:3), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 5 non-prefetchable memory range:
    [0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 6: bridge is at (0:30:0), (0,6,7), BCTRL: 0x0000 (VGA_EN is cleared)
    (II) Bus 6 non-prefetchable memory range:
    [0] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-CardBus bridge:
    (II) Bus 7: bridge is at (6:4:0), (6,7,10), BCTRL: 0x0740 (VGA_EN is cleared)
    (--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0200000/19, 0xc0000000/28, 0xd0300000/18, I/O @ 0x5088/3
    (--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0280000/19
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) Inactive PCI resource ranges:
    [0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) Inactive PCI resource ranges after removing overlaps:
    [0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "xtrap"
    (II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 4.3.99.902, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00:02:0
    (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
    (--) Chipset 945GM found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [21] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [22] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [27] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [28] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [29] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [30] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [31] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    [32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [33] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xD0200000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"(II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "AUO", prod id 8564
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "AUO", prod id 8564
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) intel(0): Display dimensions: (338, 211) mm
    (**) intel(0): DPI set to (96, 154)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd0300000 - 0xd033ffff (0x40000) MS[b]
    [1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
    [2] 0 0 0xd0200000 - 0xd027ffff (0x80000) MS[b]
    [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [7] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [8] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [9] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [10] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [11] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [12] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [15] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [16] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [17] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [18] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [22] 0 0 0x00005088 - 0x0000508f (0x8) IS[b]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [25] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [26] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [32] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [33] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [34] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [35] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 488960 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1955836 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    [drm] failed to load kernel module "i915"
    (EE) [drm] drmOpen failed.
    (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
    (==) intel(0): VideoRam: 262144 KB
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
    (II) intel(0): Page Flipping disabled
    (==) intel(0): Write-combining range (0xc0000000,0x10000000)
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
    (II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Failed
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) AIGLX: Screen 0 is not DRI capable
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
    (II) Module GLcore: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) GLX: Initialized MESA-PROXY GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (II) Synaptics touchpad driver version 0.14.6 (1406)
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "VertScrollDelta" "100"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (--) Touchpad touchpad found
    (**) Touchpad: always reports core events
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (**) Option "Protocol" "auto"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) evaluating device (Mouse0)
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) evaluating device (Touchpad)
    (II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
    (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (--) Touchpad touchpad found
    Could not init font path element /usr/share/fonts/Type1, removing from list!
    AUDIT: Mon Mar 3 00:21:47 2008: 10765 X: client 7 rejected from local host (uid 1001)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
    (II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe B.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (--) Touchpad touchpad found
    Can anyone help me with this?
    Last edited by bughunter2 (2008-03-03 01:06:30)

    The standard arch kernel includes all the required modules, at most you need to load them explicitly listing them in MODULES in /etc/rc.conf
    You need also the hw specific stuff, that is i915 and intelagp. Check lsmod and see if they are loaded. If they are not, inspect dmesg and see if udev tries to load them and fails for some reason.
    I remember some cases where intelagp and i915 are not loaded by udev in the right order, if this is your case you can try to list them in the right order in MODULES.
    There should be no need to recompile the kernel or to install a particular version of dri (just use the arch packages for mesa, libdrm etc; but I guess you have them already)

  • Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

    Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
    When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
    I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

    Send it as html so the signature is an image source URL

  • I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn ato downloads it defaults back to off, can anyone help?

    I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?

    Welcome to the Apple Community.
    Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions)

  • How can I get this program to work -- Adobe Send or Adobe SendNow

    How can I get this program to work?  I have used Adobe SendNow successfully for several years and am on automatic renewal and getting nothing but frustration for my money!  I have been unsuccessful at sending anything in the past several months.  Today while working on a deadline and many unsuccessful attempts to upload files, I signed up for a free trial at a competitor in order to get my files sent.  Want a refund  -- or better yet, keep my money and get it to work right again.

    You can't.
    Sounds like it he gave you a stolen iPhone or at least a worthless one.

Maybe you are looking for

  • Why is my macbook running so slow?

    EtreCheck version: 2.1.6 (109) Report generated January 16, 2015 at 1:26:28 AM EST Download EtreCheck from http://etresoft.com/etrecheck Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about

  • Downloading iTunes Error 7 (Windows Error 127)

    I went to update iTunes and when it finished it gave me this error. What can I do ?

  • Color correction filter

    I've been trying to learn the color correction filter. I used the manual, and read how to apply filters and the chapter on color correction. So I select my clip in the sequence, park the playhead where I want to monitor, open the scopes, drag the fil

  • Pricing date control for new tax code rate

    Hi All I have changed the tax code rate , now have few old POs where I want to capture tax as per the new rate. But PO was picking up old tax rate as pricing date was coming as the PO creation date. Now I changed the pricing date in PO to current dat

  • Broken 17.0" WXGA+ BrightView Widescreen

    I purchased a HP Pavilion dv8000z notebook in 2006 (with a 160 GB 5400 RPM Dual Hard Drive).  The computer itself is in fine condition, however, the screen broke recently and cannot be fixed.   What is my best option?  It seems if I were to purchase