Can't get browser.cache.disk.parent_directory to work

I've tried to use the browser.cache.disk.parent_directory method to move my disk cache, but this isn't working.
Details:
I did a clean install of Firefox 22 on Vista, and then, following instructions, went into about:config, created the browser.cache.disk.parent_directory key, and gave it the value of a directory I had created.
I then visited many different sites (no, not in private browsing mode), and noticed nothing was being saved there. In fact, the new directory is absolutely empty (no hidden folders either).
Looking at about:cache, I am informed:
Offline cache device
Number of entries: 0
Maximum storage size: 512000 KiB
Storage in use: 0 KiB
Cache Directory: C:\Users\XXX\AppData\Local\Mozilla\Firefox\Profiles\XXX.default\OfflineCache
And yes, browser.cache.disk.enable is set to true.
This is true regardless of whether I am using my admin account with no extensions or my standard user account with several extensions.
Advice?

the-edmeister, I carefully read the material in your link before making the changes, and then again before posting this question, and yet again now. I hate to be snide, but can you point out what there is in this link that addresses my question? (And yes, browser.cache.disk.capacity is obviously set to a positive value.)
If it helps, I'm attaching a screencap from about:config.

Similar Messages

  • HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

    My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.  I have the latest version of iTunes.  Windows has all the most recent updates too.  I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

    Already tried another USB port, still nothing.
    I don't have another PC to check, I only have one which is the one not working with my iPod.
    It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
    Please help

  • I have a gen 3 ipod and can't get it into disk mode.  In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself.  Any ideas?

    I have a gen 3 ipod and can't get it into disk mode.  In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself.  Any ideas?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut plays fine " HELP !!

    I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut " plays fine, HELP !!

    Yes it is the right Disc...
    2Z691-6040-A  (OEM) Drop-in DVD...
    System Requirements 
Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor. User must already have 10.4 or above to install this 10.5 upgrade.
    Compatibility 
eMac (2005), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), iMac (20-inch Mid 2007), iMac (24-inch Mid 2007), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), Mac mini (Mid 2007), Mac Pro, Mac Pro (8-core), MacBook (13-inch), MacBook (13-inch Late 2006), MacBook (13-inch Mid 2007), MacBook (13-inch Late 2007), MacBook (13-inch Early 2008), MacBook Air, MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), MacBook Pro (15-inch Core 2 Duo), MacBook Pro (17-inch Core 2 Duo), MacBook Pro (15-inch 2.4/2.2GHz), MacBook Pro (17-inch 2.4GHz), MacBook Pro (Early 2008), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD), Xserve (Late 2006)
    http://www.welovemacs.com/2z6916040a.html
    I'd try to find another Mac to make a DMG of it & burn a copy to see if that works better.

  • How can I get a boot-disk for a Compaq P2500 laptop Windows XP Home Edition?

    I'm already in another forum with a eerily similar question, but that's for the HP Media Center Pavilion m8000e desktop system (Windows Vista Home Premium) I was just given; I've ordered a new hard drive for that. I assume the directions to create a boot disk with the *.iso file (using Imgburn) is going to work; I have the 25-digit code for that.
    This question here now is for my wife's older Compaq P2500 2596US laptop running Windows XP Home Edition. This too needs a new hard drive, but I also am missing the boot disc for this; I do have the 25-digit product code.
    How can I get a boot disk for this laptop? I tried the Ubuntu method outlined in a few posts; geez, what a headache ... never could get it managed. Does HP not make any boot disks available? Microsoft told me to check with HP.
    I can furnish the product code; model #; serial# ... gee, maybe the oroginal receipt is even laying around somewhere ...
    I need a boot disk to get the new hard drive up on board (if I end up ordering that).
    Thanks for any help!
    Michael

    Hi 
    Please find the link given below might be helpful for your.
    http://www.computersurgeons.com/productdetails.aspx?ID=4219
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Where can i get back up disks????

    Hey whomever reads this
    I just purchased a used emac off ebay with 10.3.9 installed. It did not come with system disks. I only have 384mb of RAM at the moment and will not be able to add more until after the holidays so i cannot upgrade to Tiger or even Leopard (when it comes out) until i can upgrade the RAM. So basically my question is where can i get the Panther Disks?? I would just like to have them just incase i ever need to reinstall the OS before i can get my RAM upgraded. Can you get them from Apple? The older OS's are available for download but i could only find up to 9.2. I don't want to buy panther, i would rather upgrade ram and get tiger. If i can't get panther, would i be better off creating an image as a back up to hold me over? If so how would i go about this and also it would have to be on CD if possible. I put the CD/RW from my PC (boo to windows) into my mac the other day but i don't have a DVD drive. Wow, thats a lot of questions i just asked, lol, if anyone can help in anyway that would be great
    Thanx
    Jeff

    You can buy Panther discs on eBay and from other online sources. A good place is www.applerescue.com. Panther discs are not available for download and are not free. In fact the person who sold you the eMac should have provided the installer discs that came with the computer, although they may not have been Panther discs.
    You can purchase Tiger directly from Apple. Tiger requires a minimum of 256 MBs of RAM, so you do have sufficient RAM to run Tiger.
    I would get an external Firewire drive of size equal to the internal hard drive and then clone the internal drive to the external drive. Disk images are not very useful for system backups because you cannot boot from a disk image.
    To clone your system:
    How to Clone Using Restore Option of Disk Utility
    1. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Set Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only.
    2. Open Disk Utility from the Utilities folder.
    3. Select the backup or destination volume from the left side list.
    4. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    5. Click on the Restore tab in the DU main window.
    6. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    7. Select the startup or source volume from the left side list and drag it to the Source entry field.
    8. Double-check you got it right, then click on the Restore button.
    For added precaution you can boot into safe mode before doing the clone.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • How can i get my hard disk cable replacement

    how can i get my hard disk cable replacement in Ghana

    Remove or rename a folder on the root level probably called something like Private or Video or DCIM.

  • Can't get my iTunes gift card to work.

    Hey
    I can't get my iTunes Gift card to work I got the first part right but when I need the serial number it wouldn't work I entered it right everytime but still wouldn't work so I got out of the page and started again and I entered the Activate Numbers and it said that the card hasn't properly been activate seek help.... What do I do?

    If the error message you are receiving is that your iTunes Gift Card in inactive, you should contact iTunes Store Customer Support via the Contact Support link on the lower-left side of the iTunes support page and include attached digital photos or scanned images of the sales receipt and both sides of the gift card.

  • How can I get my hp Laserjet 1012 to work with Windows 7?

    How can I get my hp Laserjet 1012 to work with Windows 7?

    Here is a list of products that are not supported in the win7 OS. This product is listed there.
    Products not supported in win7
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • How can I get an HP Deskjet 3050 to work on a macbook air OS 10.9

    How can I get an HP Deskjet 3050 to work on a macbook air OS Maverick 10.9.5?

    Ok here is a good link Re: how do i setup/connect to my wireless printer I assume the printer is wirless if so this should work. First turn the printer on then go into system preferences and then printers and scanners. It should look for the printer that is on the same wifi as you and then just set it up.

  • I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

    I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

    It actually sounds like the warp text window is opening off screen.
    Resetting the photoshop elements 10 preferences should fix it.
    *Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
    *Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
    *Press Yes

  • HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

    I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

    Not sure if this will help anyone, but I had trouble installing on 10.8.
    I then found this particular support page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
    Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
    I use the printer through usb but my wife uses wireless from her PC laptop.
    Andre Francis

  • I can't get my HP laserjet p1102w to work with airprint

    Hi!
    So it seem's that I can't get my HP laserjet p1102w to work with airprint. I got it to send out it's own Wi-Fi signal, and i get in touch with that signal on my iPad 3. But when I wan't to print something out from Pages, then it says that it can't find any airprinters.
    I tried to update the firmware several times, but it still doesn't work. Any suggestions to what I can do?

    Hey T-racer,
    As a work-around you can also use the HP eprint method which is available with your printer. The application (HP Home & Biz) is available for free in the apple catalogue.
    You can find more info on it here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128518&cc=us&dlc=en&lc=en &product=4110396&tmp_track_link=ot_search
    It shares many of the same capabilities of airprint but is a different program/feature.
    If you have any questions, just ask!
    I work with HP.

  • I have a new Bose sounddock with a lightning connector, but my iPod has the old style connector. Can I get an adapter to make them work together?

    I have a new Bose sound dock with a lightning connector but my iPod has the old style connector
    Can I get an adapter to make them work together?

    Alternatively...
    is this what you're after?
    If so, have a look here: http://www.amazon.co.uk/Lightning-female-30-pin-Dock-Cable-Adapter/dp/B00DZN3GZK /ref=pd_sim_sbs_ce_1
    or this one...
    http://www.amazon.co.uk/SANDBERG-440-45-Adaptor-Lightning-Connector/dp/B009KZZ3L C/ref=sr_1_16?ie=UTF8&qid=1382801610&sr=8-16&keywords=30+pin+to+lightning+adapto r
    Or google "lightning female to 30-pin dock male cable adaptor". The cruicial part is female lightning to male 30-pin ends.
    The Apple cable is a female 30-pin to male lightning end.

  • Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    I was out of town for a few days. I had no issue installing the driver on Mountain Lion (10.8.2). What specifically happens when you try to install?
    If you get this message:
    then you need to right-click on the installer package and select 'Open' when you get this message:
    If this isn't your issue you need to be more specific about what is happening.

Maybe you are looking for