Can't get CHM to run off a network drive

Hello. I'm running RoboHelp 6 build 099 on Windows 2000 with
service pack 4 installed. My HTML Help file runs great from my hard
drive, but I can't get it to do much from a network drive. It
displays an "Action canceled" message upon opening, and the
navigation pane shows the correct entries for the TOC and index,
but clicking on a topic simply clears the window -- there's nothing
there.
What I've done so far: (1) Copied my .CHM file and the
hhactivex.dll file to a network directory, and (2) I registered
hhactivex.dll successfully (opened a CMD session, browsed to the
network directory containing the .chm, and did "regsvr32
hhactivex.dll" -- no errors). (3) I eventually stumbled onto the
c:\program files\adobe\robohelp 6.0\redist directory and
copied all files found there to the network directory. (This post
should have the contents of my redistrb.txt file below.) Same
results.
Any ideas on what to do next? Should I register the other
DLLs copied to the network in (3) above? (I hesitate to mess with
the registry if it's not necessary.) Weren't all these DLLs
registered during RoboHelp installation? I'm very grateful for any
help you can provide.
Bruce Watson
Chicago

Hi Bruce. This is caused by a MS security patch. Check
this
link for ways you can get around it.

Similar Messages

  • How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

  • Hard drive freezes, can no longer be accessed. running off USB hard drive..

    Here is a good one for you. My 15 month old MacBook suddenly froze and died while watching a movie (had seen the movie before). Hard drive would not mount anymore, so in order to run at all I had to reinstall Tiger on my 40 GB USB memory as a last resort. Running fine, mind you.
    Guessed I was unlucky and got a poor Seagate hard drive (but I could hear it spinning inside), so I bought a new and larger hard drive, figured it was about time. After installing it and to my amazement my Mac wont find the new disk. I figured it was simply as I had not formatted the new drive yet, but the Disk Utility cannot find the new hard drive neither. When installing it seemed to mate perfectly with the internal connectors.
    Any tips for a perplexed user, have you seen this behaviour before? How can I connect to the new or old hard drive and any test I can run to find out what is wrong?
    Best Regards
    Message was edited by: stenmark

    Hello Stenmark,
    There are three scenarios which could be producing the fault.
    Scenario 1: Your original hard drive is faulty, and so is the new one (unlikely)
    Scenario 2: Your Logic board is faulty (unlikely as you can boot externally)
    Scenario 3: The internal Flex cable connecting the HD to the LOGIC BOARD or the connector itself (both connectors are on the same flex cable) has sustained damage when installing, or has faulted with the old hard drive (most likely)
    To test, buy an firewire external hard drive case for your drive. You will need a SATA case and the firewire port provides enough power for a Sata drive to function without needing an external power source. Check the OLD + NEW sata HD's in this case to see whats faulty. If your new HD is working, then it comes down to scenario 3 and you need a new flex cable.
    Refering to scenario 3, if the either of the connecters from the HD to the LOGIC were damaged before you installed the new one, then the original HD could be functional.
    Hope that helps,
    Matt.

  • How can I get a Powershell script which maps network drives to execute at logon to any workstation in my domain

    I want to map network drives for each user when they logon to any workstation in the network.  I have created and tested the PS1 script which works fine where the drives attach and used persistent parameter.  I have updated the Windows 7 Professional
    64-bit workstation to the latest PS 4.0 code.  I have created the GPO and believe everything is assigned properly.  I made changes to allow execution of local and remote signed scripts.  I have forced the changes on a workstation using GPUPDATE
    /force, but the drives do not connect.  The GPRESULT is as follows which shows the policies are in place as shown below.  
    What am I missing to get the script to execute? 
    RSOP data for MRC\mikeg on MIDRUBD03 : Logging Mode
    OS Configuration:            Member Workstation
    OS Version:                  6.1.7601
    Site Name:                   N/A
    Roaming Profile:             N/A
    Local Profile:               C:\Users\mikeg.MRC
    Connected over a slow link?: No
    USER SETTINGS
        CN=My Name,CN=Users,DC=mrc,DC=net
        Last time Group Policy was applied: 7/21/2014 at 8:22:05 AM
        Group Policy was applied from:      MIDSRVR01.mrc.net
        Group Policy slow link threshold:   500 kbps
        Domain Name:                        MRC
        Domain Type:                        Windows 2000
        Applied Group Policy Objects
            StartingUp
        The following GPOs were not applied because they were filtered out
            Default Domain Policy
                Filtering:  Not Applied (Empty)
            Local Group Policy
                Filtering:  Not Applied (Empty)
        The user is a part of the following security groups
            Domain Admins
            Everyone
            BUILTIN\Administrators
            BUILTIN\Users
            NT AUTHORITY\INTERACTIVE
            CONSOLE LOGON
            NT AUTHORITY\Authenticated Users
            This Organization
            LOCAL
            MRCAdmins
            Domain Users
            Enterprise Admins
            Schema Admins
            AS400_Permanent_Users
            Denied RODC Password Replication Group
            DnsAdmins
            High Mandatory Level
        The user has the following security privileges
        Resultant Set Of Policies for User
            Software Installations
                N/A
            Logon Scripts
                GPO: StartingUp
                    Name:         C:\Windows\SYSVOL\sysvol\mrc.net\Policies\{47773A6D-1115-4A3D-BB74-F672B315A430}\User\Scr
    pts\Logon\MapDriveScript.ps1
                    Parameters:
                    LastExecuted: This script has not yet been executed.
            Logoff Scripts
            Public Key Policies
                N/A
            Administrative Templates
                GPO: StartingUp
                    KeyName:     Software\Policies\Microsoft\Windows\PowerShell\EnableScripts
                    Value:       1, 0, 0, 0
                    State:       Enabled
                GPO: StartingUp
                    KeyName:     Software\Policies\Microsoft\Windows\PowerShell\ExecutionPolicy
                    Value:       82, 0, 101, 0, 109, 0, 111, 0, 116, 0, 101, 0, 83, 0, 105, 0, 103, 0, 110, 0, 101, 0, 100,
    0, 0, 0
                    State:       Enabled
            Folder Redirection
                N/A
            Internet Explorer Browser User Interface
                N/A
            Internet Explorer Connection
                N/A
            Internet Explorer URLs
                N/A
            Internet Explorer Security
                N/A
            Internet Explorer Programs
                N/A

    >                  Name:
    > C:\Windows\SYSVOL\sysvol\mrc.net\Policies\{47773A6D-1115-4A3D-BB74-F672B315A430}\User\Scr
    > pts\Logon\MapDriveScript.ps1
    >                  Parameters:
    First: Only one of all current answers points in the right direction.
    You picked the local sysvol path on the DC which does not exist on
    clients, of course...
    The Path to the script MUST be an UNC path starting like
    \\mrc.net\sysvol\mrc.net\Policies\...
    Second: You CANNOT execute PS1 directly (unless you change the .ps1 file
    extension configuration). The "Name" MUST be "powershell.exe", and the
    script itself goes into "Parameters".
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Can't get Videos to run on the Internet

    Can't get Videos to run on the Internet. Clicked to watch a video and nothing happened. Sales person in Apple store said to get "Flip4Mac", free edition, which is what they used in store as the files on this site and in Windows Media. I downloaded it and I think I installed it. At least it said is was installed and updated. But when I went to my Son's favorite website, Nascar.com, when he clicked on a video to watch nothing happened. Anyone have any idea what's wrong?
    Thanks in advance for the help.....Nancy

    First off, I'll list all the items that I use to play, just about, all media on the web:
    Flip4Mac
    (as you might have found out, Windows Media Player for the Mac is no longer supported)
    VLC
    Real Player
    Perian
    Adobe Flash
    Streamclip
    All that being said, there is still some unplayable A/V content on the web. Even though it's listed as WMV, they are really processed with a codec that is underneath that wrapper, and unsupported by any of the above listed apps and plug ins. If any content like this is found on a high profile site, and is in wmv format, then the Flip4Mac people request to be told, so they can see if compatibility can be written in on their next update.
    Generally, video playback on a Mac can be somewhat complex. Would be nice if everyone used Quicktime, but I don't see that happening on the PC end of things anytime soon. So, we'll all just have to use what we can to view content.
    RE: learning Leopard....there are some tutorials on the Apple support site, but I've always found the suppot discussions to be pretty helpful. I've never been one to get a lot from manuals. Mostly, I get my knowledge from working with the apps I need, and getting advise from others who have done whatever. Occasionally, there's a class at the college that you might look into. Anyway, feel free to ask any questions you want on this forum, or drop me an email. [email protected]

  • I had to get my hard drive replaced from Apple, I lost all of my music obviously.  My question is, how can I get all my music off of my iPhone onto iTunes?  Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

    I had to get my hard drive replaced from Apple, I lost all of my music obviously.  My question is, how can I get all my music off of my iPhone onto iTunes?  Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

    You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.

  • How do you transfer Apple IDs from one ipad to another iPad?  I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.

    how do you transfer Apple IDs from one ipad to another iPad?  I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.

    You don't transfer Apple ID's from one device to another one. You sign out in the settings, )the App Store and iTunes if necessary) and then sign in with the other ID.
    Settings>iTunes & App Stores>Apple ID>Sign out. Them sign in with the other ID. You can sign out of the app store and iTunes as well by going to the featured Atab in the App Store and the music tab in iTunes, swipe to the bottom and access the Apple ID in there.
    You should have erased the iOad before you gave it to her in Settings>General>Reset>Erase all content and settings. That way she could set up the iPad as new with her own Apple ID.
    Be aware of the fact that if you use each others ID's in order to download past purchased content to your own iPads, you will lock yourself out of your own ID as you will have associated your iPad with the other person's Apple ID.
    In other words, if you sign into your wife's ID on your iPad so that you can download an app or an album so that you don't have to pay for it again, you will lock yourself out of your Apple ID for 90 days.

  • How can i get my bank card off my apple id account

    how can i get my bank card off my apple id account. i have recently found out that money has been coming out of my bank account that im not spending, we figured it is a glitch in between the ipad that me and my grnddaughter have. she used her apple id on my ipad 3 when i first got it and then i changed it over to mine but then she got a ipad 4 adn started using her apple id on it but every thing she buys or her friend that has used her account but got off of it and then bought stuff off of their own account, but for some reason everything they buy on there accounts money comes out of my bank account because she used her apple id on my ipad and then we switched it over to mine........ so some one please tell me how to get my bank card off of my apple id account and how to possible try to get my money back.... because it has took 80 bucks out of my bank account for 2 months and i cant afford that its to close to christmas for this so please help me..

    iTunes Store: Changing your payment information
    http://support.apple.com/kb/ht1918
    iTunes Store Accepted Forms of Payment
    http://support.apple.com/kb/HT5552
     Cheers, Tom

  • Issue with Illustrator CS6 - can't get it to run

    Since a couple of weeks ago, I have an issue with Illustrator CS6 - can't get it to run When starting the application I get the following error:
    "The procedure entry point ?AcquireVarient@ImageInterface@drawbot@dvaui@@QBE?BV?$intrusive_ptr@UImageInterface@drawb ot@dvaui@@@boost@@V?$rational@J@5@@Z could not be located in the dynamic link library D:\Program Files\Contents\Windows\Illustrator.exe."
    I'm running it on Windows 8 (x64). I have multiple other Adobe applications installed, which are running fine. I've tried solving the issue with reinstalling Illustrator - multiple times. My GPU driver is updated to the latest version.

    I have this issue as well on my Mac and called tech support 4 times and they can't fix it. Adobe has really gone down hill in a short amount of time!!
    Only thing that worked (as a temporary fix) is to create a new user and toggle back and forth between two users which is very annoying. Adobe has tried uninstalling, reinstalling, taking over my computer remotely, trashing plugins, verifying permissions but the fact remains that we bought CS6 four weeks ago and Illustrator doesn't work.
    I'm going on Facebook to let others know.....don't buy Adobe, it doesn't work and they don't know how to fix.

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • Can I get my personal files off of macbook pro not booting?!

    So my MacBook Pro June 2012 has pretty much died in a sense. I was using it today and kept getting error messages and my apps kept quitting for no reason. So naturally I restarted my computer...well now it won't start up. I get to the Apple logo and a bar comes up underneath it. The bar fills about an eighth of the way before it shuts down. I tried running disk utility to repair it but that didn't work. Then I tried running it in safe mode and that didn't work. I also have come to the attention that Disk Warrior doesn't work on this particular model of MacBook. Now when I go to disk utility I can clearly see that there is space taken up on the hard drive and I can get to the directories with all my personal files, but I cannot access them. My question here is how can I get these files onto an external hard drive before I have to wipe the thing clean. These files are very important to me so I need to exhaust every option before abandoning ship. They have to still be there if I can see them right?

    damage data? NO
    just
    A: dont squeeze top to bottom the HD....
    B: try not to touch the green circuit board on the HD
    C; dont shake or drop (eeek) the HD.
    Very easy to do.
    Get a GOOD HD enclosure, junky ones are more common than snowflakes in January
    http://www.ebay.com/itm/Anker-2-5-Inch-USB-3-0-eSATA-to-SATA-Hard-Drive-Disk-HDD -External-Enclosure-/321085534744?pt=US_Drive_Enclosures_Docks&hash=item4ac23072 18
    See this on HOW to install it, takes 10 seconds, easier than falling down:
    http://www.youtube.com/watch?v=QLNv8RMzfjo

  • Computer hard drive fried, all data lost, how can I get my music library off my ipod touch and saved agian to another computer? no downloaded songs, all were cd's I put on it

    computer hard drive fried, all data lost, how can I get my music library off and onto another computer? no downloads, just cd's I loaded on to it

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • New-Asset Report - awesome, but can't get it to run?

    Howdy - I am trying to run the awesome new-asset report that Zachary Loeber shared with the technet community.
    The script is here:  http://gallery.technet.microsoft.com/Excel-and-HTML-Asset-0ffbf569
    However I can't get it to run against 1 server or multiple servers.
    I followed this information someone else asked and I get back many errors, all related to the parameters.
    Can someone help me out with this?
    A. Should this be saved as a function? And then I've read conflicting or maybe different ways to run a function.  Should I do import-module or just run the script as a single command line, and I've had this issue with other functions.  Should they
    be put in a specific location on my system?  I'm newbie, so thanks for the help!
    B.  When I run this, I've tried using this simple command:  .\New-AssetReport.ps1 -Computers testserver1.domain.local -PromptForCredentials -Verbose
    C.  Then I tried this example as well from a single line or creating another ps1 script, fails either way.
    D.  What variables are required to be filled in, and what parameters are available such as report type, include memory, but not disk, etc?
    Here's the error if I enter the command like this:  .\New-AssetReport.ps1 -Computers testserver1 -PromptForCredentials -Verbose
    New-AssetReport : Cannot process argument transformation on parameter 'SaveDataFile'. Cannot convert value
    "System.String" to type "System.Management.Automation.SwitchParameter". Boolean parameters accept only Boolean values
    and numbers, such as $True, $False, 1 or 0.
    Here is the error if I use the other example which is below.  I get many errors, all tied to the parameters such as -verbose, etc.
    $Servers = @('Server1','Server2')
            .\New-AssetReport.ps1 -Computers $Servers -PromptForCredentials -Verbose
    New-AssetReport : The term 'New-AssetReport' is not recognized as the name of a cmdlet, function, script file, or
    operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
    again.
    -ReportContainer : The term '-ReportContainer' is not recognized as the name of a cmdlet, function, script file, or
    operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
    again.

    Hi,
    Please ask the author your question on the Q&A tab for that gallery entry.
    Bill

  • My iPod touch is stuck.  I can't get it to power off.  all that comes up on the screen is the Apple Logo.  Is there anything I can do to fix this problem?

    My iPod Touch is stuck.  I can't get it to power off.  All that comes up on the screen is the Apple Logo.  Is there anything I can do to fix this problem?

    You may need to hold the sleep/wake button and the home button until the apple logo appears. Or anther thing you can try is draining the battery until the battery is dead. That's what i tried and worked. You may need to do those things more than 2 times. OH anther thing is you can try connecting you ipod to your computer and see if it appears on itunes. If those don't work you can send it to apple. So that's what helped me I hope I answered your question.

  • Can't get old photo's off of iphone and into iphoto '09

    I have photo's on my iphone which iphoto does not import or even see
    if I use itunes sync it says will wipe out photos on my iphone, how can I get these old picture
    off my phone and into my computer, e-mail is no good it reduces resolution.
    thanks.

    Have you tried using image capture (in your 10.5 applications folder)?

Maybe you are looking for