Can't get Cisco to work on my Mac?
I can not get Cisco to work on my Mac OSX 10.9.4
I found this link on someone else's post about this same issue
https://mega.co.nz/#!tlghxQoZ!I0VV1Th9pgiFMQagfG7LbHLvT8xT5uyKo8CrPAX5f9U
Several people said that it worked for them but the last is in 2013 so I'm not sure if its older Mac OS systems
I can down load and install fine but when I go to open it I get this error message
ERROR! cannot write to Info.plist, there are permission problems, or you are on a read-only volume.
This cannot run from within a read-only dmg file.
But when I go to "get info" the program says i have "read and write" permission?
I'm lost and new to Mac, can someone help me please?
The Cisco VPN client is notoriously lousy. Use the built-in Cisco client if at all possible.
Similar Messages
-
I can't get java to work with Firefox on my mac with OS 10.6.8. I did everything suggested and still no luck. Java is installed, enabled, and updated. I can't even activate java per site because I don't get the "click here to activate" box for some reason. Apple support said it's a firefox problem and they can't help me. I need to be able to use java!
hello, please update firefox to the latest version & your OS to 10.6.8.
[[Update Firefox to the latest version]]
http://support.apple.com/kb/HT4561 -
HT5372 can't get iCloud tabs working on my Mac
How do I get iCloud tabs working again on my Mac. For whatever reason, they aren't showing up.
Have you tried everything in the document you came from
iCloud: Using and troubleshooting iCloud Tabs ?
The only other reaon I can think o,f that may be preventing the iCloud tabs from showing on your Mac may be, that you enabled "Private Browsing". Is that turned on in the Safari menu?
Regards
Léonie -
Can't get skype to work in other mac system accounts
we have created multiple accounts on our imac and for some reason skype will only work on mine. Any ideas how to get it to work in other people's accounts? We all have basically the same setup. skype error message is about network access but I'm on the internet in these accounts without a problem. anyone have any ideas? thank you!
Compare the Services in the Sharing Pref Panes of the users, Ports 80 & 443 at least are needed for Skype.
Turning on Personal Web Sharing for those Users should open those ports. -
I have a xD-PictureCard (SD Card) that works in a picture frame. I have used it in the past on a Windows computer, now having an apple I want to change the pics and cannot. When I reload the discs for Mac they won't install. Is there anything I can do to put the pics on the SD card, I don't want to throw away the picture frame it cost a lot of money.
This should be perfectly possible and without loading any software at all.
Get a Card Reader for the XD card, and plug it into the Mac. It will then appear on the desktop. Drg the files to the Card. Make sure you keep the folder structure used on the Card - don't change that.
Regards
TD -
Can't get iCloud to work on my Mac
I am trying to get iCloud on my Mac and iPhone so I can sync documents, photos, etc. But I can't seem to get iCloud on my Mac to work. Example: there's no option to save in iCloud on Pages. I have OS 10.7.5, and Pages 4.3; my wife has OS 10.8.5 and Pages 4.3, but she CAN save things to iCloud. Any ideas?
For sharing documents and sharing photos via My Photo Stream with your Mac you'll need 10.7.5 at a minimum which you apparently have. So you should be able to do the same as your wife.
Documents in the Cloud
iOS 5
iWork for iOS (Pages 1.5, Numbers 1.5, Keynote 1.5)
OS X v10.7.5
iWork ’09 (Pages 4.2, Numbers 2.2, Keynote 5.2)
My Photo Stream
iOS 5.1
OS X v10.7.5
iPhoto ’11 (9.2.2)
or Aperture 3.2.3
For more information on what system you need to be running in order to utilize the various iCloud features see this Apple document: System requirements for iCloud.
Have you tried logging out of iCloud and then back in in the System preferences? However, your best bet would be to do as Csound1 suggested, upgrade to 10.8.5, so you have parity with your wife's Mac. -
Can't get WEP to work with both mac and windows machines.
Currently my airport express is setup with no security. When I try to setup using WEP it works great for my powerbook but the windows machines constantly get disconnected.
Any ideas? Should I use other types of wireless security (WPA etc...)? If so, can an xp machine be configured for that type?
Any help would be greatly appreciated.
PowerBook G4 Mac OS X (10.4.7)If you can use WPA use WPA, it will depend on your PC
wireless adapter and if you are running Windows XP
SP2.
--the window PC is running xp sp 2 but the adapter does not appear to support WPA (dell true mobile 1300 internal adapter)
from your response below not clear what is the best path to take given WEP is the only option.
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors
use certain algorithms to convert simple
alphanumeric passwords (or passphrases) into HEX
keys, thus enabling people to use simple memorable
WEP password rather than lengthy HEX keys.
The problem is that different vendors use different
algorithms to generate the HEX key and therefore a
ASCII password on an AEBS will be hashed differently
on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password
will be hashed by all vendors in the same way (if
you use 40bit WEP then a 5 character password is
required).
Though sometimes not even that works and the HEX key
must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired
Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
Accessing a Airport Network with a Windows XP PC or
laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or
laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix -
Have a google aps account. I can not get it to work in my mac mail anymore
Everything was working fine with my google aps account. I have an email that's connected to my website. It's no longer working in mac mail now.
Actually your suggestion is for Enabling the Accessibility Option to use the Keyboard for Mouse functions. Not to enable the use of a USB Mouse.
Please do some research on the topic before posting misinformation.
Thanks.
Poikkeus wrote:
Go to System Preferences/Accessibility/Mouse and Trackpad, and tap on the Enable Mouse Keys. After you tap on the box, your MBP will give your mouse priority in pointing and clicking on your computer; hoever, this also deactivates your Touch Pad - so you can use only one at a time.
I'm sure this answers your question, but I'm wondering why you choose a mouse over a touch pad? -
I just upgraded my iMac to yosemite 10.10.2. Now the app my bank uses, FinanceWorks, doesn't work. Anyone know how to fix this? Thank you!
I work for Digital Insight, the digital banking vendor that your bank works with to provide you with access to FinanceWorks. Just to be sure, are you using Safari as your web browser when trying to access FinanceWorks? If so, the upgrade to Yosemite likely changed your browser settings in Safari, specifically for cookie handling. The easiest work around is to go to the “Manage Money” tab in your Online Banking, control-click one of the FinanceWorks options (Account Overview or Trends), and choose to open in a new tab. From then on (until you clear your browser history or cookies), FinanceWorks should work normally within the tab.
Also of note, Digital Insight was divested by Intuit in 2013 and is now owned by NCR. -
after installing maverick i get this message when i try to open itunes:Unmark the 32bits modus-but i have unmarked it several times!The new iTunes requires 64bits modus so what shall i do?
I upgraded my 2007 iMac (20") to Maverick. Should never have done this! Lost mail, lost my mail archive, lost numerous programs/applications, lost all my installed hardware, spend 4 days on getting it running again with the (supreme) help of Apple Care. However it should not have happened at all!
iMac Computers with less than 4Gb of internal memory (as explained by Apple Care), or less than (estimated) 150Gb of free disc-space should not upgrade! Simple as that and the App Store should warn you about that and not simply let you pick up your free copy of Maverick! -
Can't get PicLens to work on my Mac Pro
Just wondering if anybody else is having trouble with PicLens 1.5.16 ? This has always worked great on Safari before the Mac Pro and Leopard.
Hi! I just noticed that the developer doesn't claim compatibility with Leopard or Safari 3. Tom
-
Cisco 1812 wireles setup, can't get it to work
Hello everyone,
I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.
I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):
ip cef
ip tcp synwait-time 10
no ip bootp server
ip name-server <removed>
ip name-server <removed>
crypto pki trustpoint TP-self-signed-1358229530
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1358229530
revocation-check none
rsakeypair TP-self-signed-1358229530
crypto pki certificate chain TP-self-signed-1358229530
certificate self-signed <removed>
quit
username <removed>
bridge irb
interface Null0
no ip unreachables
interface FastEthernet0
description $ETH-WAN$$FW_OUTSIDE$
ip address extip extsubnet
ip access-group 101 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip inspect sdm_ins_in_100 in
ip inspect SDM_MEDIUM out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
interface FastEthernet1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
shutdown
duplex auto
speed auto
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation hdlc
ip route-cache flow
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Dot11Radio0
description 802.11g
no ip address
encryption mode ciphers tkip
ssid <removed>
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 <removed>
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
description 802.11a
no ip address
shutdown
encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key
encryption mode wep mandatory
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Vlan1
description $FW_INSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
bridge-group 1
interface BVI1
ip address <internal router ip> <subnet>
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 <external router IP> permanent
ip flow-top-talkers
top 5
sort-by bytes
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
<bunch of static nats>
<access rules>
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 <removed>
transport input ssh
scheduler allocate 4000 1000
webvpn context Default_context
ssl authenticate verify all
no inservice
endOkay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.
Either that or my WPA-PSK configuration is broken.
I switched over to an open network with no encrpytion and everything works now. -
Can't get VPN to work on RV220W
I am a home office user who bought a RV220W router for the speed advertised on smallnetbuilder. I am trying to set up the VPN but can't get it to work with the Quick VPN client. I am using dyndns to manage the dynamic IP and have entered that into the setup noted below. I can access the router remotely (remote administration) when enabled using the dyndns address so I know that is working.
IKE Policy Table
General
Policy Name: krafty001vpn
Direction / Type Responder
Exchange Mode: Aggresive
Enable XAUTH Client: None
Local Identification
Identifier Type: FQDN
FQDN: krafty001.dyndns.org
Peer IKE Identification
Identifier Type: Remote Wan IP
FQDN: krafty001.dyndns.org
IKE SA Parameters
Encryption Algorithm: 3DES
Authentication Algorithm: SHA-1
Authentication Method: Pre-Shared Key
Pre-Shared Key: xxxxxxxxx
Diffie-Hellman (DH) Group: Group 2 (1024bit )
SA-Lifetime: 28800 Seconds
VPN Policy Table
Add / Edit VPN Policy Configuration
Policy Name:
krafty001vpn
Policy Type:
Auto Policy
Remote Endpoint:
FQDN
krafty001.dyndns.org
NETBIOS:
Enable
Local Traffic Selection
Local IP:
ANY
Start Address:
End Address:
Subnet Mask:
Remote Traffic Selection
Remote IP:
ANY
Start Address:
End Address:
Subnet Mask:
Split DNS
Split DNS:
Enable
Domain Name Server 1:
Domain Name Server 2:
(Optional)
Domain Name 1:
Domain Name 2:
(Optional)
Manual Policy Parameters
SPI-Incoming:
SPI-Outgoing:
Encryption Algorithm:
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Key-In:
Key-Out:
Integrity Algorithm:
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
Key-In:
Key-Out:
Auto Policy Parameters
SA-Lifetime:
3600
Seconds KBytes
Encryption Algorithm:
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Integrity Algorithm:
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
PFS Key Group:
Enable
DH-Group 1 (768 bit) DH-Group 2 (1024 bit) DH-Group 5 (1536 bit)
Select IKE Policy:
krafty001vpn
Quick VPN Setip
User Profile: homevpn
User Name krafty001vpn
Password: xxxxx
Server Address: krafty001.dyndns.org
Port for QuickVPN: Auto
Any help in identifying what setup component I have configured incorrectly would be appreciated
ThanksI am not sure this will help but make sure the following is set correctly:
Currently VPN is somewhat broken on all versions of firmware of the RV220W including beta where VPN will ONLY negotiate on 443. If you are port forwarding 443 to a server or something else it will fail. You must allow the VPN to authenticate on 443. The router SHOULD be able to connect on 60443 as indicated on the QUICKVPN software however it doesn't this has been confirmed by a CISCO engineeer I have been speaking with regarding my VPN woes. Currently there is NO ETA on this fix.
But since you didn't mention if your 443 ports were being routed elsewhere I figured i would lay out that information here incase you where. Also I strongly recommend contacting Cisco Support for the beta firmware it makes the RV220W much better.
Also the reason for the update to the beta firmware it resolves the hair pinning problem which could also lead to VPN issues. -
Have entrourage and want to use Mail. Can't get it to work.
I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage.
I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
I am on Charter.net at my office and sbcglobal.net at home.
How can i get this to work. I can receive on Mail, but i can't send.check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption. Verify the setting from your old machine setup.
-
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
Maybe you are looking for
-
Can I use Applescript for Scriptinh in Bridge?
I use all of the CS2, but am new to scripting. From reading the Photoshop and InDesign Scripting guides I can see that I can use either Applescript or Javascript. But I cannot find any reference that indicates that Applescript can be used by Bridge.
-
Need help saving this document...says not enough RAM
I have Photoshop Elements 5.0. I have been working on some yearbook pages and had no problem saving the photo-heavy pages. I had all the photos and photo pages closed and started working on a page that was all text. Toward the end of the page I tri
-
Safari on ipad2 is not connecting to the internet, how can i make it work?
since over 48 hours my safari on ipad2 has stopped connecting to the internet, lathough my pc does connect readily. I have tried clearing ipad2 of cookies and data an dhistory, switched off and restarted both ipad2 and modem, but with no results. can
-
hey, im trying to remove these movie clips from the stage but its not working. Im spawning the movie clip to the stage every time i slide the timeline_slider, which is instance name for a slider component. I manage to put the spawned movie clip in
-
Unable to view Device button in the upper-right corner
When I connect my iphone to my laptop to sync the data from Itunes I am not able to view the Device button in the upper right corner of iTunes. Can you please help as to how to go about this.