Can't get computer to start!

Recently my computer took so long to shut down I had to do it manually. Now when I switch it on I get a quick blue hp screen then all goes blank. When I try to access start up menu at the blue hp screen not sure which option to try. Tried start computer and screen just went blank again.

Try starting in Safe Mode. It is not clear exactly what was causing the slow shutdown but if it was an update that was running before shutdown, bad things can happen when forcing a shutdown during updates.

Similar Messages

HT1758 can't get computer to start up only white screen with apple symbol on screen. help :)

Its a Mac5,1 2006 model

You may have suffered a hardware failure, please carefully read and methodically follow the steps Apple explains in Mac OS X: Gray screen appears during startup located at http://support.apple.com/kb/ts2570

Can't get WRT54G to start up, gets stuck at "checking computer settings"

Can't get WRT54G to start up, gets stuck at "checking computer settings" at 99% Please help!
If I hit the escape key it will go to the password screen, it looks like the password is already entered for me so I hit enter, but then it just goes back to "checking computer settings" and won't go past 99% again.'
Sorry but the last post mistakenly said the wrong number so I posted this.

If you are running the install CD that came with the router, the behavior you describe is exactly what happened when I tried using the CD today. The CD didn't seem to work with my computer's fixed IP address (not in the 192.168.1.0 network.)
What worked for me was to set my computer to have the fixed IP address 192.168.1.2. Then I was able to contact the router using its web interface at 192.168.1.1 amd make the necessary settings.
The password had NOT been changed from the default despite the install CD software seemingly accepting a new password. The default password worked.
Paul

Can't get computer to see galaxy note 3 hard drive?

can't get computer to see galaxy note 3 hard drive?

One last thing to add into the mix.
As you know your Router will have to probably need to be manually confiqured.
Your Router has an IP address of 192.168.1.1
The 1st port to the first machine should have an IP of 192.168.1.2
The 2nd port should have 192.168.1.3
Each corresponding port needs to have assending IP addresses.
Checking the paperwork that came with your Router will explain how to manually confiqure it.
Sometimes a complete System reset will also help.
Modem Router and Shutting off all the machines.
When powering back up start with your ISP's Modem and after it has aquired the signal and lights then you can power back your Router, and the same there wait for it to reacquire the signal and the lights each will take a minute each. Now you can restart your computers one at a time and try them. You might want to double check the cable on your troubled machine and also try switching the ports on the router and if none of this works it sounds like a bad Ethernet Card.
Don

Can't get Firefox to start after performing OS security updates

Just did the most recent updates on OS-X 10.6.8, and now I can't get Firefox to start. It comes up and says that it is having problems (the "embarassing" window) and that I should try closing tabs. However, it's not responding at all, so finally I have to resort to force quit. I've try cold starting the computer with no effect.

Let's try this. You said you are trying to start Firefox 8 on the problem machine? Can you try downloading Firefox 11 from [http://www.getfirefox.com www.getfirefox.com], install that, restart your computer, then see if it still acts up?
If it does, try running Firefox in [[Safe mode|Safe mode]].

I can't get itunes to start now that I downloaded 10.5.3

i can't get itunes to start now that I downloaded 10.5.3

Try following steps and test one at a time:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

I can't get X11 to start on my new install

Hello All,
I'm a recent convert from Ubuntu (surprise), and I can't get X11 to start. I have an intel i3 cpu with a intel hd graphics 3000 card. Here is my /etc/X11/xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "record"
Load "glx"
Load "dbe"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "DRI" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "FallbackDebug" # [<bool>]
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "Shadow" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Here is my Xorg.0.log:
[ 1516.158]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 1516.159] X Protocol Version 11, Revision 0
[ 1516.159] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 1516.159] Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
[ 1516.160] Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
[ 1516.160] Build Date: 05 March 2012 05:59:48AM
[ 1516.160]
[ 1516.160] Current version of pixman: 0.24.4
[ 1516.160] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1516.161] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1516.162] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 10:02:00 2012
[ 1516.163] (II) Loader magic: 0x7cef60
[ 1516.163] (II) Module ABI versions:
[ 1516.163] X.Org ANSI C Emulation: 0.4
[ 1516.163] X.Org Video Driver: 12.0
[ 1516.163] X.Org XInput driver : 16.0
[ 1516.163] X.Org Server Extension : 6.0
[ 1516.165] (--) PCI:*(0:0:2:0) 8086:0046:104d:9076 rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005050/8
[ 1516.165] List of video drivers:
[ 1516.166] intel
[ 1516.166] fbdev
[ 1516.166] (II) LoadModule: "intel"
[ 1516.167] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1516.167] (II) Module intel: vendor="X.Org Foundation"
[ 1516.167] compiled for 1.11.99.903, module version = 2.18.0
[ 1516.167] Module class: X.Org Video Driver
[ 1516.167] ABI class: X.Org Video Driver, version 12.0
[ 1516.167] (II) LoadModule: "fbdev"
[ 1516.167] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1516.168] (II) Module fbdev: vendor="X.Org Foundation"
[ 1516.168] compiled for 1.11.99.903, module version = 0.4.2
[ 1516.168] ABI class: X.Org Video Driver, version 12.0
[ 1516.168] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 1516.169] (II) FBDEV: driver for framebuffer: fbdev
[ 1516.313] (++) Using config file: "/root/xorg.conf.new"
[ 1516.313] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1516.314] (==) ServerLayout "X.org Configured"
[ 1516.314] (**) |-->Screen "Screen0" (0)
[ 1516.314] (**) | |-->Monitor "Monitor0"
[ 1516.314] (**) | |-->Device "Card0"
[ 1516.314] (**) |-->Screen "Screen1" (1)
[ 1516.314] (**) | |-->Monitor "Monitor1"
[ 1516.314] (**) | |-->Device "Card1"
[ 1516.314] (**) |-->Input Device "Mouse0"
[ 1516.314] (**) |-->Input Device "Keyboard0"
[ 1516.314] (==) Automatically adding devices
[ 1516.314] (==) Automatically enabling devices
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 1516.314] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 1516.314] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1516.315] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1516.315] Entry deleted from font path.
[ 1516.315] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1516.315] (**) FontPath set to:
[ 1516.315] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 1516.315] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1516.315] (WW) Disabling Mouse0
[ 1516.315] (WW) Disabling Keyboard0
[ 1516.318] (II) Loading sub module "fbdevhw"
[ 1516.318] (II) LoadModule: "fbdevhw"
[ 1516.319] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1516.319] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1516.319] compiled for 1.12.0, module version = 0.0.2
[ 1516.319] ABI class: X.Org Video Driver, version 12.0
[ 1516.319] (EE) open /dev/fb0: No such file or directory
[ 1516.319] (WW) Falling back to old probe method for fbdev
[ 1516.319] Number of created screens does not match number of detected devices.
Configuration failed.
Here is the output of the startx command:
hostname: Unknown host
xauth: (argv):1: bad display name "/unix:0" in "list" command
xauth: (stdin):1: bad display name "/unix:0" in "add" command
X.Org X Server 1.12.0
Release Date: 2012-03-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.9-1-ARCH x86_64
Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
Build Date: 05 March 2012 05:59:48AM
Current version of pixman: 0.24.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 09:51:42 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
xauth: (argv):1: bad display name "/unix:0" in "remove" command
Here is the list of modules and daemons in /etc/c.conf
MODULES=(intel_agp i915)
DAEMONS=(hwclock syslog-ng dbus hal network netfs crond)
I've installed xorg-server and the xorg-apps group, as well as xf86-video-intel, xf86-video-fbdev, xorg-drivers, libva-driver-intel, dbus, and lib32-intel-dri.
Thanks in advance, I hope that I've provided enough information.

Thank you for the reply! I removed the log and ran startx again, giving me the same output. Here is the log:
[ 4825.297]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 4825.298] X Protocol Version 11, Revision 0
[ 4825.298] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 4825.298] Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
[ 4825.298] Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
[ 4825.299] Build Date: 05 March 2012 05:59:48AM
[ 4825.299]
[ 4825.299] Current version of pixman: 0.24.4
[ 4825.299] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4825.300] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4825.301] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 10:57:09 2012
[ 4825.301] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4825.301] (==) No Layout section. Using the first Screen section.
[ 4825.301] (==) No screen section available. Using defaults.
[ 4825.301] (**) |-->Screen "Default Screen Section" (0)
[ 4825.301] (**) | |-->Monitor "<default monitor>"
[ 4825.301] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4825.302] (==) Automatically adding devices
[ 4825.302] (==) Automatically enabling devices
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 4825.302] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4825.302] (==) FontPath set to:
[ 4825.302] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4825.302] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4825.302] (II) Loader magic: 0x7cef60
[ 4825.302] (II) Module ABI versions:
[ 4825.302] X.Org ANSI C Emulation: 0.4
[ 4825.302] X.Org Video Driver: 12.0
[ 4825.302] X.Org XInput driver : 16.0
[ 4825.302] X.Org Server Extension : 6.0
[ 4825.303] (--) PCI:*(0:0:2:0) 8086:0046:104d:9076 rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005050/8
[ 4825.303] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4825.303] (II) LoadModule: "extmod"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4825.304] (II) Module extmod: vendor="X.Org Foundation"
[ 4825.304] compiled for 1.12.0, module version = 1.0.0
[ 4825.304] Module class: X.Org Server Extension
[ 4825.304] ABI class: X.Org Server Extension, version 6.0
[ 4825.304] (II) Loading extension MIT-SCREEN-SAVER
[ 4825.304] (II) Loading extension XFree86-VidModeExtension
[ 4825.304] (II) Loading extension XFree86-DGA
[ 4825.304] (II) Loading extension DPMS
[ 4825.304] (II) Loading extension XVideo
[ 4825.304] (II) Loading extension XVideo-MotionCompensation
[ 4825.304] (II) Loading extension X-Resource
[ 4825.304] (II) LoadModule: "dbe"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4825.304] (II) Module dbe: vendor="X.Org Foundation"
[ 4825.304] compiled for 1.12.0, module version = 1.0.0
[ 4825.304] Module class: X.Org Server Extension
[ 4825.304] ABI class: X.Org Server Extension, version 6.0
[ 4825.304] (II) Loading extension DOUBLE-BUFFER
[ 4825.304] (II) LoadModule: "glx"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4825.305] (II) Module glx: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.0.0
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (==) AIGLX enabled
[ 4825.305] (II) Loading extension GLX
[ 4825.305] (II) LoadModule: "record"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4825.305] (II) Module record: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.13.0
[ 4825.305] Module class: X.Org Server Extension
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (II) Loading extension RECORD
[ 4825.305] (II) LoadModule: "dri"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4825.305] (II) Module dri: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.0.0
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (II) Loading extension XFree86-DRI
[ 4825.305] (II) LoadModule: "dri2"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4825.306] (II) Module dri2: vendor="X.Org Foundation"
[ 4825.306] compiled for 1.12.0, module version = 1.2.0
[ 4825.306] ABI class: X.Org Server Extension, version 6.0
[ 4825.306] (II) Loading extension DRI2
[ 4825.306] (==) Matched intel as autoconfigured driver 0
[ 4825.306] (==) Matched vesa as autoconfigured driver 1
[ 4825.306] (==) Matched fbdev as autoconfigured driver 2
[ 4825.306] (==) Assigned the driver to the xf86ConfigLayout
[ 4825.306] (II) LoadModule: "intel"
[ 4825.306] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4825.306] (II) Module intel: vendor="X.Org Foundation"
[ 4825.306] compiled for 1.11.99.903, module version = 2.18.0
[ 4825.306] Module class: X.Org Video Driver
[ 4825.306] ABI class: X.Org Video Driver, version 12.0
[ 4825.306] (II) LoadModule: "vesa"
[ 4825.306] (WW) Warning, couldn't open module vesa
[ 4825.306] (II) UnloadModule: "vesa"
[ 4825.306] (II) Unloading vesa
[ 4825.307] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4825.307] (II) LoadModule: "fbdev"
[ 4825.307] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4825.307] (II) Module fbdev: vendor="X.Org Foundation"
[ 4825.307] compiled for 1.11.99.903, module version = 0.4.2
[ 4825.307] ABI class: X.Org Video Driver, version 12.0
[ 4825.307] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 4825.307] (II) FBDEV: driver for framebuffer: fbdev
[ 4825.307] (--) using VT number 7
[ 4825.313] (II) Loading sub module "fbdevhw"
[ 4825.313] (II) LoadModule: "fbdevhw"
[ 4825.313] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4825.313] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4825.313] compiled for 1.12.0, module version = 0.0.2
[ 4825.313] ABI class: X.Org Video Driver, version 12.0
[ 4825.313] (EE) open /dev/fb0: No such file or directory
[ 4825.314] (WW) Falling back to old probe method for fbdev
[ 4825.314] (II) UnloadModule: "fbdev"
[ 4825.314] (II) UnloadSubModule: "fbdevhw"
[ 4825.314] (EE) Screen(s) found, but none have a usable configuration.
[ 4825.314]
Fatal server error:
[ 4825.314] no screens found
[ 4825.314]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4825.314] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4825.314]
[ 4825.316] Server terminated with error (1). Closing log file.

HT4859 Can I get back to start up assistant after I have set up phone originally

can I get back to start up assistant after Iphone 4 S set up in shop yesterday? Have notes backed up in icloud from old phone and don't know how to get them onto new phone?

Welcome to the Apple community.
In order to return to set up assistant, you will need to restore the phone again.

HT4528 I can't get siri to start when holding down home button?

I can't get siri to start when holding down the home button?

Also, if you want to be able to activate Siri when the iPhone is locked, set Settings > General > Passcode > Siri ON.

How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.

How can I get *computer* to use external DVD drive? (1.8 GHz PowerPC G5 Version 10.3.9)

Place cd/dvd in drive. cd/dvd icon will show on desktop.
How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.
What is ude?
How is it connected? firewire or usb?
When connected it should appear in system profiler.
blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
look for firewire or usb.
Robert

Can't get email to start on new iphone 4s

Can't get email to start on new iphone 4s - stuck on the 'Welcome to Mail' screen, when I click on Google and enter my account details, then Next, it tells me 'This Gmail account has already been added to your iPhone.' Similarly for icloud. But that's all it lets me do. Help please

Instead I went to Settings>Mail,Contacts,Calendars...tapped the Gmail account and found that the Mail button was switched off. Duh.
Thanks for your help randers4

Can't get computer to show volume input/output controls, Can't get computer to show volume input/output controls

Can't get computer to show volume input/output controls, Can't get computer to show volume input/output controls

How, what, why, where, when!
This is the Logic Pro forum.
We're going to need more information if this is in regards to using Logic Pro.
Computer model & year, audio interface, Logic Pro version..etc..etc

I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP!

I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP! edit

-> [[Firefox is already running but is not responding]]
-> Profile in use
* http://kb.mozillazine.org/Profile_in_use
Check and tell if its working.

I use Windows 7 and can't get itunes to start due to msvcr80.dll missing.

I use Windows 7 and can't get itunes to start due to msvcr80.dll missing. I downloaded and installed latest version of itures and can't get it to start. Any suggestions?

Hi, I followed others yesterday with the same problem and removed all Apple Inc programs, rebooted and reloaded iTunes appears to of sorted this issue but as others have found OUTLOOK now takes ages to load and open ??

Can't get computer to start!

Similar Messages

Maybe you are looking for