Can't get DRI working on new ATI driver

Using the new ATI fglrx driver I'm experiencing the same corruption/watermark issues many people reported, and I read that enabling AIGLX fixes that. Sure enough it did, but AIGLX shouldn't work without DRI.
I've got the DRI module loaded, and the DRI section in my xorg.conf, but direct rendering isn't working so thusly I can't get compiz working.
If I attempt glxinfo it tells me I have no protocol selected.
Here is my /var/log/Xorg.0.log
http://pastebin.com/m54192795
I'm not sure what the problem is. Thanks!

enderandrew wrote:
I can't turn on XGL, nor can I turn on AIGLX.
I'm using KDE and Kwin.
If I attempt glxinfo and glxgears to test that direct rendering is working, I get:
"No protocol specified
Error: unable to open display :0"
I was earlier using this driver and AIGLX sucessfully with Sabayon and with Kubuntu. We've been trying different distros for my wife's laptop, though at the moment we're pretty happy with Arch. Note, I couldn't get the new ATI flgrx driver really to work at all with openSUSE on this laptop. We'd consider using the open source radeon driver, but we have a Radeon Mobility 300 card in the laptop, and we couldn't get DRI to work on that radeon drivers, it says this particular chipset isn't supported.
Compiz fails saying there is no display. I'm at work, but when I get home in a few hours I can paste specific compiz errors, and the xorg.conf but Compiz isn't going to work until I can enable either AIGLX or XGL, and neither are going to work until direct rendering is working, which I suspect it isn't, since I can't run glxinfo.
If you try to run glxinfo as root that is the error message you get but if you run as user it works fine. At least on my box.

Similar Messages

Laptop Stolen, now How can I get Ipod working with new computer/disable old

My laptop with my itunes was stolen. I still have my IPOD 30GB.....
I have a new computer, and I think I can download Itunes to it and hook up the ipod and it will be able to load ipod content to the new computer???
Also I am worried, what about the old computer, do i need to DeAuthorize it? How would I do that since I don't have it in my possession?
Thanks for any help!!!!

*what about the old computer, do i need to DeAuthorize it? How would I do that since I don't have it in my possession?*
You can't deauthorise a computer you no longer have access to on it's own. However once you reach the limit of 5 authorisations you have the option once a year to deauthorise them all in one go and start over: About iTunes Music Store Authorisation and Deauthorisation
*I have a new computer, and I think I can download Itunes to it and hook up the ipod and it will be able to load ipod content to the new computer???*
If your iPod is set to update automatically you need to take care connecting to an empty iTunes. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

Can't get my work email to load on my new phone

I can't get my work email onto my Droid X. Anyone know the trick?

Carl3 wrote:
I can't get my work email onto my Droid X. Anyone know the trick?
First quesiton I have is do you have authorization to access your work email from your Droid X? Just knowing the email address and password is enough for you to get your personal email, but your employer must approve remote access.
If it's okay with your employer, you may also need to know the incoming and outgoing email server addresses, the port number, and your username on your employer's email server. If you're not sure what they are, check with your IT admin AFTER you get confirmation that it's okay to get your email.

I have 2 itunes accounts - one work a/c and one home a/c, but when i sign in at home only my home songs appear even if I sign in my work a/c. I have authorised both computers to show both a/cs. How can I get my work a/c songs to appear at home?

I have 2 itunes a/cs one at work and one at home. Both computers are authorised for the 2 a/cs, but I can;t get my work a/c songs to show on my home computer, even though I sign in my work a/c, and I can't get my home songs to show up on the work computer even though I sign in my home a/c. V. frustrating!

Hi,
You will have to manually copy your music. Get a pen-drive big enough to accommodate all your music. And follow these steps:
1. Create a new folder on the pen-drive.
2. Copy the music from your work computer to the folder you just created. It's in (yourhomefolder)>Music>iTunes>iTunes Media>Music if you're using a Mac, or in C:\Users\(yourusername)\Music\iTunes\iTunes Media\Music if you're using Windows.
3. Now on your home computer quit iTunes, and copy your music from work to the "Automatically Add to iTunes" folder in (yourhomefolder)>Music>iTunes>iTunes Media.
4. Start iTunes. It will automatically start to process the files and move them to the appropriate place.
Repeat these steps with your music from home on your work computer. Also I suggest to use only one iTunes account if possible.
Hope it helps
Regards,
Gábor

Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It te

Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?

The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

Can't get Mail working properly

I just got my new MacPro this week, and it's really great except for I can't get Mail working right. I've set up my accounts and a few emails come through, though not many, and because it's been a week since I've been online, there should be many more than that. Also, I can't send any emails at all, no matter what I do. They will eventually go into my Sent box, but I've been sending them to myself to see if it's working, and they never come through. I spent an hour on the phone yesterday with the tech support for my ISP, and they told me that I'd have to talk to the Apple techs because they didn't have current info for *Mail 3.1*, the version I have, that the latest they had was for 2.something. So I called the Apple tech support and spent 2 hours on the phone with them, and they weren't able to help me get it going correctly either. It keeps giving me error messages such as Connection Failed, or Unable to Receive Mail, saying "there may be a problem with the mail server or network" and that "the connection to the server on ... port has timed out." I'm on DSL and am always online, so I know it's not the internet connection that's the problem. Can anybody give me some advice on what I should try? Any help will be gratefully appreciated!

Is your ISP Verizon, Demon, or Glocalnet, then it might be Apples biggest Leopard Bug in conjunction with these ISP:s POP-servers.
The one that randomly changes the settings in "advanced" from "password" to "APOP".
The visual result of this bug is that you will get a popup-box where Mail asks you to enter your password. (Which is useless entering, since the preference settings are changed.)
My advice counts only when you are supposed to use "password" as the correct setting in "Advanced" and in conjunction with some ISP:s.
Michael

Apple Users Can't Get Rid Of The New 'Super Cookies' That Track Private Web Browsing

Further to the article "Apple Users Can't Get Rid Of The New ‘Super Cookies’ That Track Private Web Browsing" https://ca.finance.yahoo.com/news/apple-users-cant-rid-super-180500863.html, is there a solution to resolve this security issue?
Here's an excerpt from the above mentioned article;
"Apple users are particularly vulnerable, as their devices do not have a function that lets users delete super cookies from their browsers.
Most websites place what’s called a “cookie” on visitors’ computers, which is used to track them and record their preferences. It’s how websites can remember your password, for example. Like your web browsing history, they’re easy to delete. If you use your browser’s “private browsing” mode they’re never saved in the first place — and advertisers can't track you, and other computer users can't go back and see what you looked at.
However, a flaw in a modern web security feature called “HTTP Strict Transport Security” (HSTS) allows websites to plant “super cookies” that can be used to track web users’ browsing habits even when private browsing is enabled.
Here’s how it works.
Security researcher Sam Greenhalgh writes that HSTS “allows a website to indicate that it should aways be accessed using a secure connection that encrypts your communication with the site.” This “flag” is then saved by your web browser, ensuring that any future visits to the website are secure. But this can also be abused, using this feature to store a unique number that can be used to track your web browser.
And because HSTS carries over into private browsing, it means the “super cookie” can be used to track you whether you’re attempting to cover your steps or not.
Greenhalgh says that Apple’s Safari web browser is especially vulnerable to the exploit. While clearing cookies on Mozilla’s Firefox, Google Chrome or Opera also erases HSTS flags, deleting the super cookies, there’s no way to do so on Safari on iOS devices.
This means that if you’ve had super cookies placed on your iPad or iPhone, there’s effectively no way to get rid of them short of reformatting the entire machine."

Hi all,
I tried this with IOS 7.1.2 Safari on an iPad retina and the super cookie did not persist after web data and history was deleted.
I also tried this with IOS 8.1.2 Safari on an iPhone 6, and the super cookie persisted even after deleting web history and website data.
Evidently it was ok on 7.1.2 and broken on 8.1.2.

Flex 4 - Can not get ADG working

Hello,
I have just downloaded flex 4 SDK (flex_sdk_4.0.0.14159_mpl) and Flash Builder 4.
I have created a test prroject and can not get it working with Advanced Data Grids.
Here is my set up: Created Project called Test, this contains one MXML file that contains an Advanced Data Grid:
<fx:Script>
        <![CDATA[
            import mx.collections.HierarchicalData;
            [Bindable] private var _test:HierarchicalData;
        ]]>
</fx:Script>
<mx:AdvancedDataGrid id="test" dataProvider="{_test}">
   <mx:columns>
       <mx:AdvancedDataGridColumn headerText="COL_A" />
       <mx:AdvancedDataGridColumn headerText="COL_B" />
       <mx:AdvancedDataGridColumn headerText="COL_C" />
    </mx:columns>
</mx:AdvancedDataGrid>
This works Okay. I then include a libary into the project, the libary, also built with the same SDK, contains a class that contains nothing but one single method that does nothing:
<mx:Canvas xmlns:fx="http://ns.adobe.com/mxml/2009"
           xmlns:s="library://ns.adobe.com/flex/spark"
           xmlns:mx="library://ns.adobe.com/flex/mx"
           width="100%" height="100%">
    <fx:Script>
        <![CDATA[
            import mx.controls.advancedDataGridClasses.AdvancedDataGridColumn;
            private function test(col:AdvancedDataGridColumn):void { }
        ]]>
    </fx:Script>
</mx:Canvas>
Launcing now causes the error
TypeError: Error #1007: Instantiation attempted on a non-constructor.
    at mx.controls::AdvancedDataGridBaseEx/getSeparator()[E:\dev\4.0.0\frameworks\projects\datav isualization\src\mx\controls\AdvancedDataGridBaseEx.as:4618]
    at mx.controls::AdvancedDataGridBaseEx/createHeaderSeparators()[E:\dev\4.0.0\frameworks\proj ects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4660]
    at mx.controls::AdvancedDataGrid/createHeaderSeparators()[E:\dev\4.0.0\frameworks\projects\d atavisualization\src\mx\controls\AdvancedDataGrid.as:2428]
    at mx.controls::AdvancedDataGridBaseEx/drawSeparators()[E:\dev\4.0.0\frameworks\projects\dat avisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4574]
    at mx.controls::AdvancedDataGridBaseEx/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\ datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:2119]
    at mx.controls::AdvancedDataGrid/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\datavi sualization\src\mx\controls\AdvancedDataGrid.as:2899]
    at mx.controls.listClasses::AdvancedListBase/validateDisplayList()[E:\dev\4.0.0\frameworks\p rojects\datavisualization\src\mx\controls\listClasses\AdvancedListBase.as:3468]
    at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.0.0\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:663]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:718]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.0.0\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1072]
Removing the method in the libary project alivates the problem. But I can not see why this is a problem in the first place!!??!?!?!?!?!?!?
Can anyone help. this is really weird.

I'm getting the same error. This is due to a bug in AdvancedDataGridBaseEx. The offending code is:
            var headerSeparatorClass:Class =
                getStyle("headerSeparatorSkin");
            sepSkin = new headerSeparatorClass();
if getStyle returns null then you will be trying to instantiate headerSeparatorClass is going to cause the "Instantiation attempted on a non-constructor" error.
Apparently someone thought that the headerSeparatorSkin would never be null.

Just downloaded iOS 5 and can't get "reminders" to input new reminder

Just downloaded iOS 5 and can't get "reminders" to input new reminders

I was having the same problem. I followed the directions from the link you listed, but the library file in the Previous folder was dated the same as the date of my upgrade. There are no other files in that folder. I tried anyway but it did not work. Any suggestions short of individually adding them?

Can't get Contribute to Create New Page

Can't get Contribute to Create New Page
--Have 'tried' all options for 'new page' - button, File>,
and Ctl + N
--Have tried via each of my different websites
--CAN Edit existing pages!
--Established myself as Administrator, and Publisher
--Downloaded "Update" & ran "Repair" option
STILL Can't open a "New Page"!!!???!!!
Can anyone help?

I don't suppose you ever found an answer to this problem?
I've got exactly the same on a laptop: Desktop is absolutely
fine.
As in your case the software works 100%, but you simply can't
create a new page (across all sites). Crazy - no error message, no
nothing.
I did make the fatal error of installing a demo version of
the software before buying the real software, so I did have to go
through 6 pages of A4 instructions to try to get the read software
to install... perhaps this is a vestige of that???

My itunes has stopped responding how can I get it working again

My itunes has stopped responding how can I get it working again?

I have a related issue (I think, hard to know for sure from the short frustrated post above).
Since the last update of iTunes (11.0.5), it kind of freezes while checking for and downloading new podcasts. Processor load goes to 100% (sometimes above! figure from Swedish OSX "Aktivitetskontroll" which I can imagine is something like "Activity Control" or "Activity Manager" in English OSX) and stays there for a few minutes, 3-5 minutes is common. During that time the mouse pointer turns into a spinning ball when moved above iTunes. Other apps work ok meanwhile. (Four processors)
Have a fixed connection to the internet, which I have tested while iTunes is frozen. We acheive above 100 Mbit/s downstream, 20 Mbit/s upstream, so the connection shouldn't be the problem.
Any ideas on what to do?
iTunes 11.0.5 (Swedish)
MacOSX 10.8.4 (Swedish)
iMac 27", late 2009 http://support.apple.com/kb/SP576

Activatable RMI - can not get to work

Hi
I am desperate to get activatable RMI to work. I tried the Sun tutorial example and even that I can not get to work.
I would really appreciate it if someone can highlight where my stupidity lies.
Here are my sources:
Remote Interface:
package compute;
public interface Compute extends java.rmi.Remote
void executeTask() throws java.rmi.RemoteException;
Client code:
package client;
import compute.*;
import java.rmi.*;
public class Client
public static void main(String[] args)
if (System.getSecurityManager()==null)
System.setSecurityManager(new RMISecurityManager());
try
Compute comp=(Compute) Naming.lookup("//"+args[0]+"/ComputeIT");
comp.executeTask();
System.out.println("returned");
catch (Exception e)
System.out.println("Exception caught!");
System.out.println(e.getMessage());
Server Implementation:
package actengine;
import compute.*;
import java.rmi.*;
import java.rmi.activation.*;
public class ActServerImp extends Activatable implements Compute
public ActServerImp(ActivationID id,
MarshalledObject mobj) throws RemoteException
super(id,0);
public void executeTask() throws RemoteException
return;
Server Setup program:
package actengine;
import compute.*;
import java.rmi.*;
import java.rmi.activation.*;
import java.util.Properties;
public class ActServerSetup
public static void main(String args[])
try
System.setSecurityManager(new RMISecurityManager());
Properties props=new Properties();
props.setProperty("java.security.policy",
"/u/pretora/java/rmi/actsrv/security.policy");
ActivationGroupDesc.CommandEnvironment ace = null;
ActivationGroupDesc agd=new ActivationGroupDesc(props,ace);
ActivationGroupID agi=ActivationGroup.getSystem().registerGroup(agd);
// ActivationGroup.createGroup(agi,agd,0);
String location="file:/u/pretora/java/rmi/actsrv/";
MarshalledObject data=null;
ActivationDesc ae=
new ActivationDesc(agi,"actengine.ActServerImp",location,data);
Compute cri=(Compute)Activatable.register(ae);
System.out.println("Remote reference obtained");
Naming.rebind("ComputeIT",cri);
System.out.println("Remote reference bound to registry");
// System.exit(0);
catch (Exception e)
System.out.println("ActServerSetup caught "+e);
e.printStackTrace(System.out);
If I run the lot (rmiregistry and rmid (with security pol!)) I get the following exception on the server side:
java.io.StreamCorruptedException: InputStream does not contain a serialized obje
.at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:855)
.at java.io.ObjectInputStream.<init>(ObjectInputStream.java:174)
.at sun.rmi.server.MarshalInputStream.<init>(MarshalInputStream.java:102)
.at sun.rmi.server.ActivationGroupInit.main(ActivationGroupInit.java:52)
the client side just times out:
failed to activate object; nested exception is:
java.rmi.activation.ActivationException: timeout creating child process
It does work if I uncomment the 2 commented lines in the server setup progam and let rmid use the setup program's JVM to instantiate the ActServerImp.
Any ideas much appreciated. Thanks

I finally found my problem. By changing the codebase string in ActServerSetup.java from file:/// to http:// URL, I was able to see in Apache HTTP server's log the 404 errors for my interface classes. The line that read
String location="file:/u/pretora/java/rmi/actsrv/";
had to be changed to
String location="file:///u/pretora/java/rmi/actsrv/ file:///u/pretora/java/rmi/common/";
Now I am all set.
thanks

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

Can t get to work tint2 launcher

I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
i've set up the panel the way i want but i would like to have a few launcher
I've try serveral thing but i can't get it to work,
and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
tks
Here my tint2rc
# TINT2 CONFIG FILE
# horizontal panel
# squared taskbars
# idirae config
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #808080 20
border_color = #ffffff 10
# ID 2 - task active
rounded = 0
border_width = 0
background_color = #feffff 0
border_color = #d8d8d8 0
# ID 3 - task
rounded = 0
border_width = 0
background_color = #F5F5DC 0
border_color = #000000 0
# ID 4
rounded = 0
border_width = 1
background_color = #888888 0
border_color = #ED2323 60
# ID 5 - taskbar
rounded = 0
border_width = 1
background_color = #feffff 10
border_color = #ffffff 10
# ID 6 - active taskbar
rounded = 0
border_width = 1
background_color = #feffff 30
border_color = #ffffff 30
# ID 7 - tooltip
rounded = 3
border_width = 0
background_color = #222222 90
border_color = #222222 90
# ID 8
rounded = 0
border_width = 1
background_color = #888888 20
border_color = #888888 20
# Panel
panel_monitor = all
panel_position = top left horizontal
panel_items = LTSBC
panel_size = 100% 32
panel_margin = 0 1
panel_padding = 3 3
panel_dock = 0
wm_menu = 1
panel_layer = bottom
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 1.5
autohide_height = 6
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 5 2
taskbar_background_id = 5
taskbar_active_background_id = 6
taskbar_name = 1
taskbar_name_background_id = 0
taskbar_name_active_background_id = 0
taskbar_name_font = Crisp 12
taskbar_name_font_color = #ffffff 30
taskbar_name_active_font_color = #ffffff 50
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 0
task_centered = 1
task_maximum_size = 20 20
task_padding = 0 0
task_background_id = 3
task_active_background_id = 2
task_urgent_background_id = 4
task_iconified_background_id = 3
# Task Icons
task_icon_asb = 80 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 80 0 0
# Fonts
task_font = BankGothic Md BT 10
task_font_color = #696969 60
task_active_font_color = #696969 100
task_urgent_font_color = #696969 100
task_iconified_font_color = #696969 60
font_shadow = 0
# Launcher
launcher_icon_theme = elementary
launcher_padding = 2 2
launcher_background_id = 1
launcher_icon_size = 20
# Specify icon theme names with launcher_icon_theme.
# if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
#launcher_icon_theme = AwOkenWhite
# Each launcher_item_app must be a full path to a .desktop file
launcher_item_app = /usr/share/applications/chromium.desktop
launcher_item_app = /usr/share/applications/gparted.desktop
# Clock
time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
time1_format = %I:%M %p
time1_font = BankGothic Md BT 9
#time2_format = %A, %B %d
#time2_font = Ubuntu-L 7
clock_font_color = #ffffff 80
clock_padding = 5 0
clock_background_id = 5
clock_lclick_command = gsimplecal
#lock_rclick_command =
# System Tray
systray = 1
systray_padding = 2
systray_sort = right2left
systray_background_id = 5
systray_icon_size = 20
systray_icon_asb = 100 0 0
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 7
tooltip_font_color = #ff0000 100
tooltip_font = Roboto-Thin normal 9.0
# Mouse
mouse_middle = none
mouse_right = toggle
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 1
battery_hide = never
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 80
battery_padding = 5 0
battery_background_id = 5
# End of config
Last edited by jolejo07 (2013-07-05 01:39:25)

I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21)

Can't get DRI working on new ATI driver

Similar Messages

Maybe you are looking for