Can't get Droplets to call 32 Bit Photoshop

I'm trying to get my Droplets to call the 32 bit version of Photoshop CS5, but it will only call the 64 bit version.
My Droplet runs a Plugin that currently only supports 32 bit version of CS5.  How do I configure which version of CS5 will get involked by Droplets?  This is a critical part of my workflow, so I would very much appreciate any solution here.
Details for those who are interested:
Droplet created in Photoshop CS5 32 bit (running as admistrator).  Droplet calls Nik Software dFine and Sharpener Pro.
I use Lightroom (2.7) to select my group of photos, and I Export using Jeffrey Friedl's "Run Any Command" Plugin to call my Droplet.
When I run the Export, the Droplet opens Photoshop CS5 64 bit version, and then the Droplet generates an error since the Nik software does not work in 64 bit mode.
So my current conclusion is that I need to get the Droplet to open the 32 bit version of Photoshop CS5.
Thanks,
Nick

Zeno,
You are right on both counts -- thank you.  As there are so many associations with Photoshop, it is best to have Photoshop 32 bit open in advance.  I tried this, and indeed, the Droplets are forced to work in the open version of Photoshop.  Unfortunately, now I'm getting an error with the Droplet not running correctly -- it stalls midway.  I think this may be a Nik Software issue now, and I have a Tech Support questioni in to them.  (The Action that the Droplet is running works just fine when it runs just as an Action on one photo.  When it's a droplet, there is something wrong.)
Thanks,
NIck

Similar Messages

  • How can I get a Windows Vista 32 bit version of Photoshop, please?

    How can I get a Windows Vista 32 bit version of Photoshop, please?

    Hi Kevinhannan,
    No current Photoshop supports this configuration.
    Photoshop CS5 was the last version of Photoshop to support Windows Vista.
    Photoshop Elements 12 was the last version of Photoshop Elements to support Vista as well.
    We no longer offer Photoshop CS5 or Elements 12.
    You might look at Amazon to see if you can get either product listed above. Just be careful when purchasing, make sure you know who you're buying from!
    Regards,
    Pete

  • I can not get a phone calls from my country after using ssim card here.

    Hi I am Amy whoes phone is from South korea using ur ssim card from yesterday in NY.I asked if i can get phones calls from South korea though the number that i used in South korea and they said yes. Not only one but some at AT&T. But i can not get a phone calls. How can i get a call from South korea? Also, I am wondering if i chage the ssim card from you for my original one from south korea by myself to check. Is it possible that after the checking changing original one to new one from you? Thanks,Amy 

    Reset the network settings, they must still say ATT/Cingular.

  • Can you get upgrade from elements 10 to photoshop?

    Can you get upgrade from elements 10 to photoshop?

    They also send the emails just for registering PSE, as long as you agree to let Adobe spam you when you register. And sometimes it's possible to get the special upgrade price even when it's not officially on, if you call adobe sales and ask nicely. It depends on the sales rep you get.

  • How can I get the picture to show in Photoshop?  The thumbnail image appears in the right side panel but the full image isn't showing at all.

    How can I get the picture to show in Photoshop CS3?  The thumbnail image appears in the right side panel but the full image isn't showing at all.

    What specific information would you need?  The program was working just fine early yesterday morning and than when I came back in the afternoon to edit  some more pictures that is when I wasn't able to see the full image anymore.  It is providing me with all of the editing options as if the picture is there but it is just a blank screen with the thumbnail pic showing in the right panel. 

  • How can I get a serial number on my photoshop cs6 free trial

    How can I get a serial number on my photoshop cs6 free trial

    The trial doesn't need a serial number, because it is just a trial.
    When you purchase the software, then you will receive a serial number.

  • I have my redemption code but can't get the serial number for adobe photoshop elements 12 that I jus

    I'm trying to find out my serial number.  I have the redemption code but can't get the serial number for adobe photoshop elements 12 that I just purchased

    Hi KEsheppard
    Please refer the link below to get the help regarding redemption code and the serial number:
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    Let us know if it helps,
    Thanks!
    Gurleen Kaur

  • How can I get rid of sun spots on photoshop cc?

    How can I get rid of sun spots on photoshop cc?

    Hi Carol,
    I think my suggestion on this would be to use Content Aware with Color Adaptation turned on.
    Alternatively, you can follow the link below too.
    Photoshop Tutorial: Removing sunspots - YouTube
    Cheers!
    md

  • Where can i get free plug-ins for my photoshop?

    where can i get free plug-ins for my photoshop?

    Be careful to check for compatibility, you need to check whether a plug-in works with the version of Photoshop you purchased/subscribed to.

  • How can I get Pixel Bender to install in Photoshop CS 5 on my Mac?

    Is there a solution to getting Pixel bender to install in Photoshop CS 5 on Mac?

    The link for the photoshop cs5 pixel bender plugin is broken on the adobe pixel bender page.
    Here are the links
    Here is the pixel bender plugin for the 64 bit version of photoshop cs5 on windows and mac
    http://download.macromedia.com/pub/developer/pixelbender/pixelbenderplugin_p3_pscs5_64bit_ 061711.mxp
    For the 32 bit version of photoshop cs5 on windows
    http://download.macromedia.com/pub/developer/pixelbender/pixelbenderplugin_p3_pscs5_32bit_ 061711.mxp
    If you have photoshop cs5.1
    windows cs5.1 32 bits
    http://download.macromedia.com/pub/developer/pixelbender/pixelbenderplugin_p3_pscs5-1_32bi t_061711.mxp
    64 bits cs5.1 windows and mac
    http://download.macromedia.com/pub/developer/pixelbender/pixelbenderplugin_p3_pscs5-1_64bi t_061711.mxp

  • Can't get my serial number on adobe photoshop elements 11, I have my redemption code

    I can't get my serial number, by going to www.adobe.com/go/getserial and entering my redemption code as my instruction card tells me to do in the adobe photoshop elements 11 box I bought from best buy.

    Please try a different web browser.  If you continue to face the same difficulties then I would recommend contacting our support team at http://adobe.ly/yxj0t6.

  • I can't get my tablet to work in Photoshop

    I have a mac and I can't get my VisTablet Orignal to work in PhotoShop Elements 11. What should I do to make it work?

    Moving the discussion to PSE forums

  • Where can I get the Windows 7 64 bit driver for the MBP (6,2)?

    I have to install Windows 7 for work. I have my hard drive partitioned for triple boot, with Ubuntu 64 bit on one partition, and Windows 7 64 bit enterprise installed on another. Both boot fine; Ubuntu found all its drivers automatically (well done, guys!), but Windows of course cannot. Boot camp assistant refuses to download the drivers because I've already partitioned the drive. (Pardon my frustration, but that is a completely brain-damaged software design decision. -1 to apple.)
    Is there any way to get the drivers?? Even just for the wireless card?? This is unbelievably frustrating. It's 2011 - stuff is supposed to 'just work,' and playing coy little hide-the-hardware-driver games does not 'just work'.

    Alas, no dice. I was able to skip the compatibility check and run the bootcamp installer, and the 3.1 and 3.2 updates. However, I still have no wireless. The device manage shows it as an unknown network card.
    linux lspci identifies the ethernet and wifi cards as:
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
    03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
    the ethernet card is recognized in windows, but the BCM43224 is not.
    under linux the BCM43224 works out of the box using the standard "wl" driver with Broadcom's recently open-sourced firmware.
    But I'm having a hard time finding any other Windows drivers for it: searching broadcom's site and windows support doesn't give me anything, and google just gives me loads of what look like pay-to-download scam sites and malware. Have I entered some weird parallel reality where wifi support is better in linux than in windows? :lol: that can't be, maybe I'm not configuring something correctly.

  • C7, can't get rid of "call forwarding enabled" mes...

    It appears always and is terribly annoying, because it prevents from stopping a call if for example a wrong number has been dialed.
    It tells me some like "Attention. Call forwarding enabled.".
    It is probably because of operators voice mail service redirection. What I wanted is to
    just turn that message off but surprisingly I haven't found such option in settings.
    Have I missed it or isn't it unpossible at all?
    Thanks

    I get this too. I'm on the o2 network in the UK, On my C7 every time I finished a call, a similar type of message would pop up to tell my my remaining credit. Very annoying and there's no option to disable it from within the phone. But I'd heard that this is a phone network service message which can be disabled by requesting it through customer services, which I tried and it worked. I've heard that this 'call forwarding' message is also a phone network service message, which can be disabled too, which I havent yet done, but it might be worth asking your network if they can disable it for you.

  • I can't get PB12.5 to 64-bit Oracle

    Hello,
    our PB 12.5 application works perfectly on an XP box connecting to 32-bit local Oracle 10g and a 32-bit national Oracle 11g database.  With the Windows 7 rollout, we must now connect to a 64-bit local Oracle 11g database and the 32-bit national Oracle database simultaneously.  It appears that we cannot.  We have two version of Oracle installed - the 64-bit local and 32-bit client.  The oracle_home in the registry refers to the 64-bit local.  If I change this to refer to the 32-bit client, the listener immediately stops working.
    The 64-bit sqlplus can access both the 64-bit oracle database and the 32-bit national database.  My .NET applications can also access both applications simultaneously.
    However, If I try and create a database profile through PB12.5, I get an Ora-12557 protocol adapter error.  If I try and run the application, I get the OCI.DLL cannot be loaded message.
    Does anyone have any idea how I can connect to BOTH 64-bit and 32-bit at the same time.
    Much appreciated.
    RS

    Hello Krzysztof,
    I thank you for your comments, but all I know is what works and what doesn't.  Changing the path alone does not work for me.  I have to set the oracle home somehow.  If I set it in the registry, the listener stops working and, therefore, I cannot connect to the 64-bit database.  If I change the oracle_home temporarily, as with the bat file solution, I can connect to both databases.
    In a nutshell, all of our workstations come with the 32-bit client.  I had to install the 64-bit full version of Oracle to access a 64-bit enterprise edition database on a new Windows 7 box.  Part of my app runs under vb.net and can access both versions of the database.  Part of the app also runs under PB12.5 and I know that I need to access the databases through the 32-bit client.  The problem is how.  Well, I know that simply putting the client in the path PRIOR to the full version of Oracle does not work.  I wish it did.  Therefore, I have to use the .bat file and set the path and oracle home temporarily.
    If this doesn't make sense to you, then please enlighten me, perhaps with something concrete (I'm not trying to be facetious)
    Thank you,
    RS

Maybe you are looking for