Can't get embedded AP on 891W to accept clients

Hi all.
I have a very simple configuration that I'd like to do, which I have done before, but yet can't do now. 
I have an 891W router, the embedded ap801 instad.  IOS on both is 15.2. 
I have an SSID set up, using wpa-psk.  I have a fully working configuration identical to this at a customer site, yet here, I do the same configuration and all of my wireless devices cannot connect (they do see the ssid broadcasting though). 
I really have no idea how to troubleshoot, since comparin this configuration to a working one reveals they are done the same.  The difference here, I have no LAN cables connected to WAN or LAN ports, but I don't see how that should matter if trying to connect by WLAN and get an IP via DHCP from the router. 
Actually now that I think about it, one difference:  the working config, they have a DHCP server on a Windows server - here, I have DHCP set up on the IOS router itself.  So maybe the inability to connect (Apple and Windows devices just say "can't connect", notthing more specific...) is just that it can't get an IP via DHCP ?
Is therer a way via the IOS on the AP to look at logs, debug, or what not to see if clients are connecting but perhaps just nogt getting DHCP through to the IOS on the host router? 

Hi Steve, I"ll continue on this issue startingt today.  I had gotten buried under  a bunch of work and just got out now
Give me a bit to reply with the inf you requested.  But first, I"m going to try everyting again just to make sure the issue hasn't changed. 

Similar Messages

  • How can I get TB to open again and accept the emails Carbonite restored recently?

    A large number of emails were deleted from my Inbox for no reason I could discern. I downloaded all the missing folders and files from Carbonite, but I can't get TB to open now. I get this message when I try: "Thunderbird is already running, but is not responding. To open a new window, you must first close the existing Thunderbird process, or restart your system." Since I can't get TB to run, I have no way to close it. Restarting makes no difference. The nice folks at Carbonite confirmed that they had downloaded my emails onto my computer, but said that the Thunderbird problem was not their area of concern. And, if my problem was not solved in 30 days (this occurred about a week ago), they would automatically delete my back-up of these emails from their server.

    *Goto Task Manager > Process > Check for "Thunderbird"
    **If its running > End Process Tree
    if your using windows check for malware
    If your using IMAP create a new folder and move your emails from old profile to new profile
    *http://www-archive.mozilla.org/support/thunderbird/profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
    *http://kb.mozillazine.org/Profile_Manager

  • I can't get the sync to work or accept a generated sync key

    I have gotten a new computer to replace a new one that was defective & have been trying to sync the new new one & I can't get it to sync.
    I generate a 9 digit code from the defective one to enter it into the new computer but then it asks for a sync recovery code which I never was asked for before when I synced. I said I lost it & I generated a new one. When I put the code in that was generated from the other computer it doesn't accept it & says it's not valid. I've even tried saying I lost the computer & let it generate a new code & it won't accept that.
    I unsynched the defective computer & it still won't work.
    I'm getting very frustrated because I can't access my add on's, etc.
    I can't even find a phone number to call & get help from anyone. VERY FRUSTRATED!!!!
    I need to get this resolved fast because I have to return this computer!!!!
    HELP!

    I have tried this several times & nothing works. I tried doing these steps from the computer that is already working & I also tried it the other way In either case even if I say I don't have the device with me & it generates a new sync key it doesn't like it.
    I will try it again but please clarify:
    do I follow those steps on the new computer & copy the 12 character code to the old computer or visa versa?
    If it generates a new code & it says it's not valid then what? I don't want to lose everything that is on this computer if I can't set up the new one.

  • How can I get my second generation shuffle to accept all songs?

    When I try to add certain songs, it will not copy them. It will begin the synching process, then cancel synching. I will check the playlist and the song will not be there. I retry multiple times. It is not because the memory is full. It will let me add other songs after a failed synch. Removing my ipoid and putting it back does not help. For the first fews years I had the shuffle, it worked fine and accepted any song. Over the past six months, it has begun doing this. How can I get it to accept all songs again? Is there a way to restore it? Will that help? Thanks!

    Se my resposne to one of your other posts

  • I can't get my pdf printing screen to accept a page size change to an archetectual D.

    I can't get this new version to accept a 24 x 36 arch D page. I've always used reader for pdf files to plot here at work, but since the new download, its not performing at all.
    I have no problem plotting from my autocad program, just plotting full size pdf drawings.
    If anyone can help I would apprieciate greatly.
    Chuck

    Just so everyone knows, I un-installed reader 10 and re-installed 9.2 and my plotter is back working perfectly. there must be something in the newest version that make plotting a problem, maybe not printing with normal size paper.
    Thanks for all that looked at my problem even though no one answered>

  • Can't get embedding characters to work

    Hi
    I have to embed VAGRounded bold. I can't seem to get it to work reliably. I have created 4 dynamic text boxes, one for each of the 4 styles and embedded the characters into each one for the 4 versions of the font. I then wrote some text directly into the boxes on the stage.
    I created a 5th dynamic box and called it "test". I set the family to VAG ROunded, style:bold (ie just like one of the ones above). I then embedded the characters into it.
    I added this dead simple as2
    stop();
    test.text="hello"
    THis 5th text box looks NOTHING like the bold one from above, as you can see in the attached image.
    What am I doing wrong?
    Thanks
    E

    I have no idea. It works just like it should for me. I tried it both on my Mac at home and my PC at work. I don't have the font you are working with so that might be an issue. Have you tried it with other fonts. Let's make the test simpler.
    One dynamic textfield, font of your choice, style of your choice, put some text in it, embed basic latin.
    Wait a minute....you aren't embedding all by any chance? Does your font have a bunch of crazy higher unicode plane characters? Does embedding basic latin work better than all? Anyways back to our simpler test.
    Another dynamic textfield, match the font and style as above, embed only lowercase, and give it an instance name.
    Then assign it "Hello World."
    Do you get the capital H and W? If so then the embedding is working fine. What happens if you delete the first field and test publish again? Do the H and W go away? If so then you are certainly pulling the embeded font from the published swf's "library" (not to be confused with the library panel and fonts that you create in there.

  • Can't get embedded font to work on Button

    I'm trying to use an embedded font in order to fade Panels as
    well as the text in the Panels. I have the following code to set up
    the embedding (using Edwardian Script so I can be sure the font
    worked):
    <mx:Style>
    @font-face {
    src:url("C:/WINDOWS/Fonts/ITCEDSCR.TTF");
    fontFamily:myScript;
    .scriptStyle {
    fontFamily:myScript;
    </mx:Style>
    This works fine when I apply this style to Labels using the
    styleName property, but when using it on a Button, I get a really
    fuzzy/ugly text, as though the font didn't work and some bad
    default were used, that didn't scale to the small size very well.
    I've also tried directly setting fontFamily directly on the
    Button control, rather than using the intermediary style
    (scriptStyle).
    Is there some restriction about using embedded fonts on
    Buttons?

    Hi,
    I was just looking for answers to my own question when I
    noticed this, which was giving me a problem earlier this week. I
    found that the default text for a button is 'bold' so if you
    haven't specified a bold embedded font, then it won't look good. I
    just got around it by specifying a 'normal' fontweight for my
    buttons.
    I would imagine that, after all this time, you've probably
    found the answer, but thought it might help anyone else who is a
    couple of weeks behind me on the learning curve ...

  • Can't get embedded OC4J to work on Jdev  10.1.3.0.4

    I completed half of the tutorial "Building XML-Enabled JavaServer Faces Application" to the point where I am asked to run the ADF application and I get the error "06/09/27 21:55:32 Error parsing internal-settings.xml: server-extension-provider class 'oracle.j2ee.ws.server. mgmt.runtime.InterceptorContainerExtension' not found" and then nothing happens. There must be a simple solution but I don't know how to proceed. Can anyone give some insight on this? Thanks, Michael.

    Michael,
    the author is not an Oracle employee and thus the option to get an answer to your issue is
    a) The XMLDB forum
    XML DB
    b) Post a comment in response to this article in the hope it is forwarded to the author (see the comment link at the bottom fo the article)
    http://www.oracle.com/technology/pub/articles/vasiliev_xmldb_jsf.html
    Frank

  • How can I get embedded advertising links to open in a new window?

    I am working with Muse and have tried editing the HTML but it didn't work.
    Thanks, Sandy

    If you are inserting links as text and then through Hyperlink adding external link , then you can setup the link to open in a  new window.
    http://helpx.adobe.com/muse/using/creating-hyperlinks.html#id_29862
    In case the link is included in any html frame , you can declare target="_blank" which would open the links with a new window.
    Thanks,
    Sanjit

  • How can I get embedded wave files to download as they do in Explorer and Chrome?

    Example: When I visit the web site of apostolictabernacle.us I hear music which is embedded on the home page if I use Explorer or Chrome but not when I use Firefox.

    Example: When I visit the web site of apostolictabernacle.us I hear music which is embedded on the home page if I use Explorer or Chrome but not when I use Firefox.

  • Can i get embedded timecode on osmf MediaPlayerSprite?

    Hi:
    I need to get the timecode I send to the server with FMLE. In NetStream I use this code:
    nStream.client = {onMetaData:onMetaData, onFI :onFi};
    and got the timecode perfectly on the callback, but I cannot find a way to do this with OSMF. I create the video like this:
    player = new MediaPlayerSprite();
    player.resource =  new URLResource("http://myserver:1935/dvr/live/manifest.f4m?DVR");;
    player.mediaPlayer.autoPlay = true;
    player.mediaContainer.width = 640;
    player.mediaContainer.height = 360;
    player.mediaPlayer.addEventListener( TimeEvent.CURRENT_TIME_CHANGE, _onProgress );
    player.mediaPlayer.addEventListener ( MediaPlayerStateChangeEvent.MEDIA_PLAYER_STATE_CHANGE , _onMediaPlayerStateChange , false , 0 , true ) ;
    player.mediaPlayer.addEventListener ( MediaErrorEvent.MEDIA_ERROR , _onMediaError , false , 0 , true ) ;
    player_ts.addChild(player);
    Is there any way to get the timecodes for this code?
    Thanks so much.

    org.osmf.net.NetLoader assigns the client to the NetStream in "finishLoading()".
    Here's what I would do:
    1- Extend LoaderBase (to make your own loader, probably copying most of the NetLoader's code) and give the NetStream your own client (with your own handlers).
    2- Create your media manually and pass an instance of that loader class to it

  • I can't get embedded formm to align properly on page

    Code
    html>
        <body>
    <script type="text/javascript" src="https://formscentral.acrobat.com/Clients/Current/FormsCentral/htmlClient/scripts/adobe.for m.embed.min.js"></script>
    <script type="text/javascript">;ADOBEFORMS.EmbedForm({formId:"7WcAFl3ql65lZL1OifNphw"});</script>
    <html>
        <body>

    Hi,
    Please refer to the following FAQ:
    http://forums.adobe.com/docs/DOC-1991
    Regards,
    Brian

  • I can't get my Airport express to work in client mode with my speedtouch base station?

    Im trying to add my Airport Express to my exisiting wireless network - which runs from a speedtouch base station. I only want to use the AP to use air tunes but i cant seem to get it running in client mode. The interface on the Airport Utility seems different to that described in the online help here: http://support.apple.com/kb/HT1731
    Everytimes i try to add it to an exisint network the AP dissapears on its restart. Any ideas if what im trying to do is possible. I've tried creating the network initially with the ethenet cable connected - which works, but then when its detatched although the AP status light stays green it disapears from from the network and i cant stream.
    thanks for any help and advice.
    Wilkie

    In order for the AirPort Express to join another wireless network as a "client", three conditions must be met in the setup of the Express. It must be provided with......
    1) The name of the wireless network that is to be joined
    2) The exact type of wireless security settings that the wireless router is using
    3) The wireless network password
    Most users have no trouble with 1) and 3), but few know the exact type of wireless security settings that their wireless network is using. So, they accept a default setting on the Express, which does not match up with their network.
    Bottom line....unless you know the exact type of wireless security settings that your wireless router is using...the Express will never join the network. The setup ends with an error message and you have to start all over again with another try....which will fail as well, etc.
    If you know the exact type of security settings that the Speedtouch router is using.....we can provide you with a step by step setup guide.
    If you do not know this, or are unsure....you will need to get into the setup menus for the Speedtouch router to locate the wireless settings. Or, if the wireless router was provided by your ISP, they may be able you with this information.
    Post back with that info and we will proceed.

  • How can I get the Adobe Reader download to accept that I have deleted Adobe 7.0?

    Whenever I try to install an upgrade I get a message saying Adobe 7.0 is using the files please delete and try again.   But I have deleted the files and I can't read PDF forms now.  Any help would be appreciated.

    Assuming you mean Adobe Reader, you may want to try the following.
    Remove all traces of Reader (not only the program) from your system using the Windows Installer Cleanup Utility. This is no longer supported by Microsoft because it can produce problems with Win 7, but you can still download it from from places like
    http://majorgeeks.com/download.php?det=4459
    Then, download the Reader installer from
    http://get.adobe.com/reader/enterprise/
    and perform a clean install.

  • HT5610 How can I get iTunes on my mini to accept iPod music that was loaded via cd?

    How can I transfer my iPod music that was loaded directly from cd onto my new, recently updated iPad mini

    Welcome to the Apple Community.
    Sorry, I don't understand your question. You can't load content from a CD onto an iPod, it's either purchased from the store or synced from a computer. Please expand a little on what it is you are trying to do.

Maybe you are looking for