Can't get "Encode Alpha Channel" to work.

I created an animation in Apple Motion with an Alpha Channel and exported it as a .mov. I put it on my web page and the Alpha Channel appears fine. When I run my file through Media Encoder, the Alpha Channel is gone even though my settings appear to be correct: FLV, ON2VP6, CBR.

Looks like this question is for Adobe Media Enocder not for Flash Media Live Encoder. Please post on
http://forums.adobe.com/community/ame

Similar Messages

Can't get Encoded Digital Audio to work with HDMI again

I like to connect my 15" Retina Macbook to my Pioneer VSX-1121-K receiver using a high speed HDMI cable (high speed for 3D). My sound settings for a long time have been very reliable; in Audio Midi Setup I had the HDMI output set to 48 kHz + "Encoded Digital Audio" and had no major issues. My encoded Dolby Digital and DTS 5.1 signals were being passed through to the Pioneer receiver just fine.
So then I got Mavericks recently and everything seemed fine for a couple of days; when suddenly, Audio Midi Setup decided it never wants to allow the "Encoded Digital Audio" format to work.
I select VSX-1121 under System Preferences/Sound, but only get the standard blah PCM over the HDMI. Here's the weird part I don't understand: when I go to Audio Midi Setup and change the format from "2ch-24bit Integer" to "Encoded Digital Audio", it automatically switches the sound to Built-In Output and doesn't budge when I tell it to use the HDMI output.
I tried changing the sound effects & alerts to the Pioneer and back to Built-In Output, but that didn't affect anything. I've tried restarting, disconnecting the HDMI and plugging it back in, turning the receiver off/on, turning HDMI Control off/on, tried a different HDMI cable and receiver input -- all no dice.
It won't let me select 96 kHz for the HDMI either. What up with that? I was fooling around with FLACs in 192 and 96 kHz about a month ago with no problems whatsoever, and playing 5.1 DVDs without any of this weirdness. If it's somehow Mavericks' fault I want a big fat patch on this.
Other details: receiver's connected to a Panasonic VT30 that I use as a second screen with the Macbook for movies and stuff. Also have a current model AppleTV connected. I assume they're both not affecting anything.
Any solutions or insights would be appreciated.

I had a similar problem. Took me a while to figure out, but the problem was in the HDMI settings in the receiver, NOT the software.
My setup:
Macbook Air > Mini Display Port to HDMI converter into Onkyo Receiver > HDMI Out of Onkyo into Panasonic TV.
Symptoms:
I was getting stereo fine, but not 5.1 (options grayed out etc). You were on the right track; I unplugged the TV which opened up all the multi channel options for HDMI. Turns out the HDMI out settings in the receiver were set to pass Audio to the TV. So the Audio Device Settings on my Mac viewed the TV as the destination device. But as the TV only supports stereo, that's all I could select through Audio Device Settings and VLC etc.
Solution:
On the receiver I went to Setup > Hardware Settings > HDMI and switched the audio off for HDMI Out. Now the Mac sees the receiver as the final destination and I can select HDMI (Encoded Output) etc. from VLC. That sends proper Dolby Digital 5.1 etc. nicely.
Note:
I can select all the multi channel options for HDMI in Audio Devices Settings (as supported by my Onkyo Receiver), but I just left mine at 2ch-24 bit. Seems as long as you select Encoded Output in VLC it will send 5.1 perfectly and no issues with regular stereo playback for music.

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

Can I get a stepper motor to work useing an AO channel on a DAQ card?

Can I get a stepper motor to work useing an AO channel on a DAQ card? I know its a very low currentl coming out, but what Im going to be using the motor for is very weak. Has anyone tried this before? I certinaly dont want to spend 2,000+ on somthing that will be basicly moving a string on some pullys back and forth.
Thanks,
-Mark

Greetings, Mark
You can certainly use the A0 as a driving signal, but you need to amplify the current considerably to run a stepper motor. Additionally, most stepper motors require multiple phase driving signals to work properly. If I understand your application, I believe a stepper motor is a bit of overkill...you only want to use them when precise positioning and repeatability is an issue. You might look at some of the linear actuators available.
Eric
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

How can I see the alpha channel in the channels palette?

Hello, mi format plugin loads a rgba image. I see it with transparency, that's ok, but when I go to the channels tab I only see 4 items (RGB, Red, Green and Blue).
How can I see the alpha channel of my file in the channel tab?
Thanks!

OK, something must be wrong... but I don't find it!
That's my whole code (resumed). I ommit some code (saving file code (not used) or main function, where I only call te "DoSomething" functions. You can see that I use layers. The DoReadContinue function is only used to show the preview.
In the DoReadStart function I set the parameters for the layers (and the preview), and I fill the "data" and "layerName" params in the DoReadLayerContinue function. I hope you can understand the code!
const int32 IMAGE_DEPTH = 32;
SPBasicSuite * sSPBasic = NULL;
SPPluginRef gPluginRef = NULL;
FormatRecord * gFormatRecord = NULL;
intptr_t * gMxiInfoHandle = NULL;
MXIInfo* gMxiInfo = NULL;
int16 * gResult = NULL;
#define gCountResources gFormatRecord->resourceProcs->countProc
#define gGetResources   gFormatRecord->resourceProcs->getProc
#define gAddResource    gFormatRecord->resourceProcs->addProc
CmaxwellMXI* cMax;
static void DoReadPrepare (void){
    gFormatRecord->maxData = 0;
static void DoReadStart(void){
    char header[2];
    ReadScriptParamsOnRead (); // override params here
if (*gResult != noErr) return;
    // Read the file header
    *gResult = SetFPos (gFormatRecord->dataFork, fsFromStart, 0);
    if (*gResult != noErr) return;
    ReadSome (sizeof( header ) * 2, &header);
    if (*gResult != noErr) return;
// Check the magic number for avoid no-mxi files
    int headerID = CheckIdentifier (header);
    if( headerID != HEADER_MXI ) *gResult = formatCannotRead;
if (*gResult != noErr) return;
// The file is OK. Let's continue to obtain the data of the image.
cMax = new CmaxwellMXI( 0 );
strlen((char*)gFormatRecord->fileSpec->name);
gMxiInfo->filename = _strdup((char *)gFormatRecord->fileSpec->name + 1);
bool res = cMax->getMXIIInfo(
                (const char*)gMxiInfo->filename,
                gMxiInfo->width, gMxiInfo->height,
                gMxiInfo->burn, gMxiInfo->monitorGamma, gMxiInfo->iso,
                gMxiInfo->shutter, gMxiInfo->fStop, gMxiInfo->intensity,
                gMxiInfo->scattering,
                gMxiInfo->nMultilightChannels, gMxiInfo->lightNamesList,
                gMxiInfo->availableBuffersMask,
                gMxiInfo->widthPreview, gMxiInfo->heightPreview,
                gMxiInfo->bufferPreview);
if(!res) return;
// Check the available extra buffers
int count = 0;
if( gMxiInfo->availableBuffersMask & CmaxwellMXI::ALPHA_BUFFER ){
    // We will use that string to obtain later the desired extra buffer.
    gMxiInfo->extraBuffersList[count] = "ALPHA";
    gMxiInfo->hasAlpha = true;
    count++;
else{
    gMxiInfo->hasAlpha = false;
gMxiInfo->nExtraBuffers = count;
switch( IMAGE_DEPTH ){
case 8:
      gMxiInfo->mode = plugInModeRGBColor;
      break;
case 16:
      gMxiInfo->mode = plugInModeRGB48;
      break;
case 32:
      gMxiInfo->mode = plugInModeRGB48; //96 gives me an error
      break;
// SET UP THE DOCUMENT BASIC PARAMETERS.
VPoint imageSize;
if( gFormatRecord->openForPreview ){
    // Preview always RGB8.
    imageSize.v = gMxiInfo->heightPreview;
    imageSize.h = gMxiInfo->widthPreview;
    gFormatRecord->depth = 8;
    gFormatRecord->imageMode = plugInModeRGBColor;
    gFormatRecord->planes = 3;
    gFormatRecord->loPlane = 0;
    gFormatRecord->hiPlane = 2;
    gFormatRecord->colBytes = 3;
    gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes;
    gFormatRecord->planeBytes = 1;
else{
    // Configure the layers. All RGBA32.
    imageSize.v = gMxiInfo->height;
    imageSize.h = gMxiInfo->width;
    gFormatRecord->depth = IMAGE_DEPTH;
    gFormatRecord->imageMode = gMxiInfo->mode;
    gFormatRecord->layerData =
        2 + gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers;
    gFormatRecord->planes = 4; // RGBA.
    gFormatRecord->loPlane = 0;
    gFormatRecord->hiPlane = 3;
    gFormatRecord->planeBytes = IMAGE_DEPTH >> 3;
    gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
    gFormatRecord->colBytes = gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
    gFormatRecord->transparencyPlane = 3;
    gFormatRecord->transparencyMatting = 1;
    gFormatRecord->blendMode = PIBlendLinearDodge;
    gFormatRecord->isVisible = true;
SetFormatImageSize(imageSize);
gFormatRecord->imageHRes = FixRatio(72, 1);
gFormatRecord->imageVRes = FixRatio(72, 1);
VRect theRect;
theRect.left = 0;
theRect.right = imageSize.h;
theRect.top = 0;
theRect.bottom = imageSize.v;
SetFormatTheRect(theRect);
// No resources for now.
if (sPSHandle->New != NULL) gFormatRecord->imageRsrcData = sPSHandle->New(0);
gFormatRecord->imageRsrcSize = 0;
    return;
/// Called for prewiew only.
static void DoReadContinue (void){
    // Dispose of the image resource data if it exists.
    DisposeImageResources ();
if( gFormatRecord->openForPreview ){
    VPoint imageSize = GetFormatImageSize();
    gFormatRecord->data = gMxiInfo->bufferPreview;
      if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
    if( gFormatRecord->data != NULL ){
      delete[] (Crgb8*)gMxiInfo->bufferPreview;
      gMxiInfo->bufferPreview = NULL;
      gFormatRecord->data = NULL;
// De momento nos olvidamos de los icc profiles [TODO]
    //DoReadICCProfile ();
static void DoReadFinish (void)
    // Dispose of the image resource data if it exists.
    DisposeImageResources ();
    WriteScriptParamsOnRead (); // should be different for read/write
// write a history comment
    AddComment ();
// Clean some memory.
if( gMxiInfo->lightNamesList != NULL ){
    for( unsigned int i = 0; i < gMxiInfo->nMultilightChannels; i++){
      if( gMxiInfo->lightNamesList[i] != NULL ){
        delete[] gMxiInfo->lightNamesList[i];
        gMxiInfo->lightNamesList[i] = NULL;
    delete[] gMxiInfo->lightNamesList;
    gMxiInfo->lightNamesList = NULL;
if( gMxiInfo->bufferPreview != NULL ){
    delete[] gMxiInfo->bufferPreview;
    gMxiInfo->bufferPreview = NULL;
if( gMxiInfo->filename != NULL ){
    delete[] gMxiInfo->filename;
    gMxiInfo->filename = NULL;
if( cMax != NULL ){
    delete cMax;
    cMax = NULL;
static void DoReadLayerStart(void){
// empty
static void DoReadLayerContinue (void){
int32 done;
    int32 total;
VPoint imageSize = GetFormatImageSize();
// Set the progress bar data
done = gFormatRecord->layerData + 1;
total = gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers + 2;
// Dispose of the image resource data if it exists.
DisposeImageResources ();
uint32 bufferSize = imageSize.v * gFormatRecord->rowBytes;
int nPixels = gMxiInfo->width * gMxiInfo->height;
char* lightName = NULL;
// SET THE BLACK BACKGROUND
if( gFormatRecord->layerData == 0 ){
    gFormatRecord->data = (void*)new byte[bufferSize];
    for( int i = 0; i < nPixels; i++ ){
      ((float*)gFormatRecord->data)[ i * 4 ]     =
      ((float*)gFormatRecord->data)[ i * 4 + 1 ] =
      ((float*)gFormatRecord->data)[ i * 4 + 2 ] = 0.0;
      ((float*)gFormatRecord->data)[ i * 4 + 3 ] = 1.0;
    // Set the layer name.
    gFormatRecord->layerName = new uint16[64];
    gFormatRecord->layerName[0] = 'B';
    gFormatRecord->layerName[1] = 'a';
    gFormatRecord->layerName[2] = 'c';
    gFormatRecord->layerName[3] = 'k';
    gFormatRecord->layerName[4] = 'g';
    gFormatRecord->layerName[5] = 'r';
    gFormatRecord->layerName[6] = 'o';
    gFormatRecord->layerName[7] = 'u';
    gFormatRecord->layerName[8] = 'n';
    gFormatRecord->layerName[9] = 'd';
    gFormatRecord->layerName[10] = '\0';
// LOAD THE LIGHT LAYERS
else if( gFormatRecord->layerData < gMxiInfo->nMultilightChannels + 1 ){
    void* lightBuffer = NULL;
    void* alphaBuffer = NULL;
    byte foob;
    dword food;
    // Get the light buffer.
    bool res = cMax->getLightBuffer(
                           (char*)gMxiInfo->filename,
                           gFormatRecord->layerData - 1, IMAGE_DEPTH,
                           lightBuffer,
                           gMxiInfo->width, gMxiInfo->height, lightName);
    if(!res){
      *gResult = readErr;
      return;
    if( gMxiInfo->hasAlpha ){
      // Get the alpha buffer.
      res = cMax->getExtraBuffer(
                            (char*)gMxiInfo->filename,
                            "ALPHA", IMAGE_DEPTH, alphaBuffer,
                            food, food, foob);
      if(!res){
        *gResult = readErr;
        return;
    else{
      alphaBuffer = (void*)new float[ gMxiInfo->width * gMxiInfo->height * 3 ];
      for( int i = 0; i < nPixels; i++ ){
        // Only need to set the red channel.
        ((float*)alphaBuffer)[ i * 3 ] = 1.0;
    // Put them together.
    gFormatRecord->data = (void*)new byte[bufferSize];
    for( int i = 0; i < nPixels; i++ ){
      ((float*)gFormatRecord->data)[ i * 4 ]     = ((float*)lightBuffer)[ i * 3 ];
      ((float*)gFormatRecord->data)[ i * 4 + 1 ] = ((float*)lightBuffer)[ i * 3 + 1 ];
      ((float*)gFormatRecord->data)[ i * 4 + 2 ] = ((float*)lightBuffer)[ i * 3 + 2 ];
      ((float*)gFormatRecord->data)[ i * 4 + 3 ] = ((float*)alphaBuffer)[ i * 3 ];
    delete[] (float*)lightBuffer;
    delete[] (float*)alphaBuffer;
    // Set the layer name.
//LOAD THE EXTRA CHANNELS
if( ... ){
//READ THE RENDER BUFFER
if( ... ){
// User can abort.
if (gFormatRecord->abortProc()){
      *gResult = userCanceledErr;
      return;
// Commit the layer.
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
// Update the progress bar.
(*gFormatRecord->progressProc)( done, total );
// Free memory.
if( gFormatRecord->data != NULL ){
    delete[] (float*)gFormatRecord->data;
    gFormatRecord->data = NULL;
if( lightName != NULL ){
    delete[] lightName;
    lightName = NULL;
static void DoReadLayerFinish (void)
// Nothing to do.
And that's the image that I obtain loading a 8 layer image:
The layers have transparency (when I set "transparencyPlane" to -1, or 0, or 1, or 2, or 3, or 4....., I got the same result!). The blending mode is still "normal". I had set it to "linear dodge" The "isVisible" param works OK.
Alpha 1 is still black.
Is possible that I need to set something in the .r file? I had to add "FormatLayerSupport { doesSupportFormatLayers }," to manage layers, for instance.

How can I output the alpha channel in Premiere elements 10

How can I output the alpha channel in Premiere elements 10. What format should I use?
Tried outputting to an AVI filet but the file did not contain an alpha channel that After Effects 5.5 would recognize.

Bill,
I hope you ordered 32 GB or more on that new computer After Effects 5.5 takes up as much as it can.
The Roto Brush tool is really a timesaver over ordinary Rotoscoping. Although, my problem now is: when I try to send a 1 min. And 11 second video from Adobe Premier Pro 5.5 two Adobe Media encoder 5.5, the process hangs in wait state in the Media Encoder. I have filed a request for help on the Media Encoder forum.
I know you will put your new computer to use in helping other people and for this I thank you.

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How can I get iCloud to accept my working Apple ID and password

My Apple ID and password works for iTunes and App Store. I'm trying to set up iCloud on my iPhone and iPad but i keep getting an error message that reads unsupported ID. Apple ID must be in the form of email address (@me.com). I don't have a MobileMe account. How can I get iCloud to accept my working Apple ID and password?

I've also reset my password to my Apple ID. I still get the Unsupported ID and password.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy

I just got a new itouch and i can't get imessage or facetime to work on my home network

I just got a new itouch 4 and i can't get imessage and facetime to work on my home wifi network (Airport Express). I can't explain it. The itouch works fine otherwise uncluding the internet. Facetime and imessage work at the apple store so there must be something wrong with my home network. Please help if you can!
iPod touch, iOS 5.0.1

I changed the DNS to 8.8.8.8 as you suggested with no success, I even tried 8.8.8.8, 8.8.4.4 as suggested by others with no success either. When I try and activate iMessage or Facetime, I still get the same message "could not sign in, please check your network connection". The internet and Mail work perfectly fine on the iPod touch so the WiFi signal IS going through. I am at a loss, any other suggestions would be more than welcome. Thanks!

How can I get my excel spreadsheet to work in numbers

How can I get this budget sheet to work in numbers when it's from excel.

I couldn't get the picture of the whole thing it wouldn't load but you see where it say like 700.00 then below that it say 175.00 well that part works telling me what I need to know but when it get to where it says the 850 it stops working? it won't sum it out or something I'm not great with excel and this was sent to me by a first and it's our budget plan and I really need to be able to use it

How can I get my iPhone 5s to work in my 2015 outback

How can I get my iPhone 5s to work in my 2015 outback?

I Tried that and I can get calls out and in but no messaging.
AWindow opens and says this feature is not supported on this device
my iPhone 4 worked fine is it my iOS?

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that.

How can I get an external microphone to work on an iphone?

How can I get an external microphone to work on an iphone?

Japib is correct.
WHAT happens? Exactly.
Also helpful would be to tell what event preceded this behavior - added App, update iOS, etc.
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
ÇÇÇ

Can't get "Encode Alpha Channel" to work.

Similar Messages

Maybe you are looking for