Can't get error message to stop appearing, missing font...

I just updated to osx 10.5, and ilife 09 at the same time. I'm working in iWeb, and my previous sites have imported fine, and are uploading great, but I keep getting a message that I'm missing a font. Every time I click on a different page in my site I get the message, and even after I click continue and click on another page then come back, I get the same annoying message. The font is ArialMT and it seems to be the font that is the default for the template called "white".
My question is how do I get the error message to stop appearing. I would replace the font but I do not have it. Does anyone know how to fix this problem?

I have Arial Rounded MT Bold in my fonts list but not in my fonts folder. Its copyright © 1993, Monotype Typography ltd. It appears to be a Microsoft font. I must trash it in case it pollutes my Mac!
Its sitting in a CD artwork folder and I must have imported it from somewhere at some time.
Have you tried deleting the iWeb preference file - Home Folder/Library/Preferences/com.apple.iWeb.plist and restarting your Mac to see if that will fix it.
The default font in iWeb is Arial Regular.

Similar Messages

I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?

I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?

Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications. I even tryied going into itunes that is installed on my phone. I still cannot find anyplace to manage these popups. I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either. Any guidance is MUCH appreciated - Im not sure where to go from here.

HT5129 I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . . but I have not knowingly published any photos to MobileMe. How can I get this message to stop. It's getting annoying.

I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . . but I have not knowingly published any photos to MobileMe. How can I get this message to stop. It's getting annoying.
Also, how can I remove duplicate photos in an album without doing it manually?
Thanks!

When the prompt pops up next time you start iPhoto select Learn more. Then click on iPhoto preferences and select the Accounts tab. Delete your MM account and the quit iPhoto. Next time you open iPhoto the problem should be eliminated.

Outlook closes and will not download a particular message.How can i get that message to stop coming to my inbox?

outlook closes and will not download a particular message.How can i get that message to stop coming to my inbox?

Hi,
May I ask your intention by doing this? Is the particular message harmful to your computer?
Which type of email account are you using? If you want to prevent a particular message from being downloaded to Outlook, we can login to the web interface of your email account and then remove the particular email from your Inbox.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can we get error message when a component is entered twice in BOM??

Hi,
I have a BOM with around 150 components.
Can we get an error or warning message when ever a component is entered twice in the component list????
Thanks for your views.
Naveen.

In addition to the above points about enhancement PCSD0005, here is some more information that you may find useful.
- The enhancement is called when you press enter after inserting a component.
- The component name is stored in field rc29p-idnrk
- Your programmer should know if it is possible to transfer this name to a table where it can be retained. Then when you add the next component, the exit can check against the previously inserted components. With a lot of components, you may get performance problems doing this though....
Exit is called here:
SAPLCSDI     FORM     MATERIAL_PRUEFEN
CALL FUNCTION 'EXIT_SAPLCSDI_006'
   call customer-function '006'
        exporting                                          "note 611155
             i_rc29p = rc29p                              "note 611155
        importing
             msg_data = msg_tmp
             t_msg_data = lt_msg                           "note 942798
        tables
             mat_bom_allocation = mastb_tmp
        changing

How can I get error message when calling pl/sql

Hi,
I call a pl/sql java wrapper generated by Rosetta.
public static void startWf(
OracleConnection _connection,
BigDecimal p_goal_header_id,
BigDecimal p_submiter_userid,
String p_commit,
String p_init_msg_list,
String [] x_return_status,
BigDecimal [] x_msg_count,
String [] x_msg_data
) throws SQLException
the pl/sql is written by the standard way of OAF backend,
PROCEDURE start_wf ( p_goal_header_id in number
          ,p_submiter_userid     in number
,p_commit in varchar2 DEFAULT FND_API.G_TRUE
          ,p_init_msg_list in varchar2 DEFAULT FND_API.G_FALSE
,x_return_status out varchar2
,x_msg_count out number
,x_msg_data out varchar2);
when running this procedure in TOAD, in case of error, following script can print error message:
if l_return_status <> 'S' then
dbms_output.put_line('Result');
dbms_output.put_line('status: '||l_return_status);
dbms_output.put_line('error count: '||l_msg_count);
dbms_output.put_line('Loop Error');
dbms_output.put_line('Err: '||fnd_msg_pub.get(-1,p_encoded=>'F'));
for i in 2..l_msg_count loop
dbms_output.put_line('Err: '||fnd_msg_pub.get(p_encoded=>'F'));
end loop;
end if;
if l_return_status = 'S' then
dbms_output.put_line('Success');
end if;
end;
My question is when calling pl/sql java wrapper from Java, in case of Error, return_status="E", then in order to get exact error msg, is there any equivalent java method such as get error from pageContext or OADBTransaciton.. etc instead of calling again pl/sql fnd_msg_pub.get to get error msg?
thanks
Lei

Lei,
You can use
checkErrors(OADBTransaction pTx,
int pMessageCount,
String pReturnStatus,
String pMessageData)
method in OAExceptionUtils Class.For details look at javadoc of OAExceptionUtils Class.
--Mukul

How do I install Elements for Windows 7 PC with 64 bit? Get error message - file archive part missing

We purchased Elements 12 and Premiere Elements 12 on September 7, 2014 and have tried a variety of things including searching through FAQs on the Adobe site, etc. etc. and cannot get our downloads to work. We are avid computer users and have never had problems downloading software before.
From our account under "orders" - I have tried clicking on the Akamai download manager and the Alternate Download Method on for each application with the same results.
We have a Windows 7 PC with a 64 bit operating system and Internet Explorer 11.
On all attempts we get an Adobe screen with 2 links – 1 for a file ending in .7z and a 2nd file ending in .exe.
I click on the first file and confirm the download completes at 100% (not paused, etc.) and is in the downloads folder for my user name on the PC.
I click on the 2nd link for .exe and I receive the error message below – 2nd screen shot – “file archive is missing” all folders/files must be in same folder.
So I see it’s a winzip file (as a winzip pop up folder had come up also) so I download the free version and unzip the files in the same downloads folder under my user name to try that.
I click on .exe file link again and same message. I tried copying the files directly to the downloads folder (as they all unzipped into a subfolder called PSE 12 and tried clicking on .exe again but get the same message.
For Premiere I tried the same and got same results on the 64 bit version download.
I do not know how to access the software we purchased.
Any help or advice is appreciated.
Also - if anyone knows how I can contact Adobe for a full refund so I can just buy the boxed software instead - that would be helpful as well as that is not easy to find online either.
Thanks!
Ariel

I get an error message saying that the quicktime installer will only work on 32 bit
The QuickTime player works on 64-bit systems. (It's a 32-bit application, but it should run fine using the standard 32-bit-on-64-bit Windows-on-Windows emulation.)
What's the precise text of your installation error message, dc? (There one or two different ones I can think of that might mention 32-bit)

Getting error message: MSVCR80.dll is missing after last update... won't launch iTunes...

I keep getting this error message when trying to download iTunes. Have unistalled and then tried to reinstall.
MSVCR80.dll is missing
Error 7 (Windows Error 126)
Please advise

iTunes for Windows: Missing MSVCR80.dll

I keep getting error message " server stopped responding" when trying to connect to internet via wifi

My iphone works fine using cellar network, but will not connect to internet via wifi. Ive reset network setting with no diffrence.
Any ideas?

And you can turn the WiFi button on and off?
If yes, then you next need to try to Restore your iPhone from your backup.

HT5868 What happens if you can't get the message to stop popping up?

I click trust, 1 second later, the message is back.

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

In WE19 getting error Message as Function module missing

Hi Friends,
I need to debug the Inbound function module
so in WE19 i am providing the IDOC number and clicking on the Inbound function module then i am getting pop-up
i am able to select my function module name
and checking the Fore ground processing Radio button
for debugging
I am getting a Warring Message as
Interface or Function module <NAME> is Incorrect
Kindly suggest me
where the mistake might be
and how to correct IT
Thanks in Advance
Ganesh

Hi Ganesh,
I believe you are using a non IDOC function module, that's the reason you are getting that error.
Use the appropriate IDOC function module and then select the Debug check box and it will stop.
If you can provide me the IDOC message then I can help you by giving the correct Function Module.
Thanks,
Mahesh.

Get error message when trying to print

Recently ungraded iMac to 10.4.1; since then unable to print PDF except thru "Preview".
I get error message " pictwpstops stopped unexpectedly with status 1".
I have no idea what this means or how to fix it; I can print PDF fine in preview but not from desktop as before.
Any ideas would be apprecaited.

re pictwpstops
I have the same problem - I have found one work around. Adobe reader 6.0 will print my adobe documents.
if anyone knows a real solution I'm at [email protected]

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport

Getting error message setting up contacts "your setup cannot start because the iCloud server has stopped responding" How can I fix this?

Trying to set up contacts on Windows7 PC. Get error message that "setup cannot start because iCloud server has stopped responding. How can I fix this?

Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo

I can't update itunes. I get error message can't find "itunes.msi". What can I do?

What can I do to download updated itunes. I get error message can't locate "itunes.msi." folder.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

Can't get error message to stop appearing, missing font...

Similar Messages

Maybe you are looking for