Can't get external hard disk icons to appear on iMac desk top

Hi guys,
I hope someone can help me. I have OS X Lion on my iMac. I noticed that a few days after installing it, my external  hard disk icons and  Macintosh HD icons  disappeared from the desktop. I tried going to Finder- Preferences- Show these items on desktop and checked the appropriate boxes but this only restored the Macintosh HD icon to the desktop. Checking the "External disks" box makes no difference. When I open Finder I can see the external hard disks in the sidebar so I don't think there is a problem with the disks. Can anyone advise me on how to restore the external hard disk icons to the desktop?
Thanks a million

I'm not sure why they're not showing but try doing a couple of troubleshooting steps. Restart the machine in the Restore Partition, when you hear the startup tone hold down the Option key and choose the Restore Partition. Then open Disk Utilities and Repair Disk Permisssions on your internal HD at least 2x, while you are in DU it wouldnt hurt to run Repair Disk, again 2x. Then restart the computer in Safe Mode to clear some caches and finally restart normally and check.

Similar Messages

  • How can I get my LaCie external hard disk icon to reappear on my desktop?

    The iMac discussion section does not seem open to me asking this question. It's geared to the Intel Macs or other categories which do not allow for me to type in the following question:
    Bottom Line Question:
    How can I get my La Cie external hard disk icon to re-appear on my desktop?
    Background:
    I clicked Go > Computer
    At that point there the usual set of icons in the far left hand column, including one for my LaCie external hard disk. Near that icon there was a dark upturned truncated/shortened arrow. I absent-mindedly clicked on that dark arrow, and at that moment I could hear my LaCie external hard drive power down; I heard the sound of hardware powering down.
    The LaCie external hard drive is sitting right next to my iMac and its blue light is ON so I know that at very least I didn't turn it off.
    But where is it?
    And how can I get it to reappear on my desktop?
    Right now when I click onto Go > Computer, the LaCie external hard drive disk is NOT THERE.
    Thank you.
    Lorna in Southern California

    James, yes. I put the question in the iMac section and did get some solutions. My LaCie external hard drive is back now. I was aware that the arrow is connected to Eject actions, but was concerned when I went to Finder Preferences and selected the LaCie to show up on the Desktop, and its icon did not show up on the desktop. I hope you and your family are enjoying the weekend, James. But how could you not: You have little Kate there with you. Lorna in Southern California

  • Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5

    can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
    I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
    I can hear them running but I can not get them on the computer any more. They did work at one time.
    Can any one PLEASE help?

    Nothing appear on my desktop. 
    I did Repair and Verify the HDDs in Disk Utility>First Aid from the
    Utilites App about a dozen times ans they all said everything was good
    except for the last time there were erors found and I ran the
    Disk Utility from the Start Up Disk and the repairs were made and everything
    was subposed to te good and still Nothing on the desk top.
    Ginger

  • How can i get my hard disk cable replacement

    how can i get my hard disk cable replacement in Ghana

    Remove or rename a folder on the root level probably called something like Private or Video or DCIM.

  • Folders that I copy from my Macbook to my External Hard Disk does NOT appear on any other drive that I connect the Hard disk to (TV, PC, ... etc.)

    I'm facing a bit of a problem.
    Any folder I copy from my Macbook Pro to my External Hard Disk does NOT appear on any other device that I connect the Hard Disk to (TV, PC, etc).
    The Hard disk format is "MS-DOS (FAT)".
    The folders that are copied from Macbook appear when I connect the Hard Disk to my Macbook only, yet, the folders that I copy from a PC to the Hard Disk appear on Macbook, PC, and TV and are also available from editing from both Mac and PC.
    I was advised to install "Paragon" software and I did but I'm not sure how to use it to convert the folders on the hard drive to any format that can be read on other drives or devices (NTFS or otherwise).
    I'd appreciate some help. Thank you.

    Hi Simon.  How is it formatted, FAT or NTFS? 
    I only ask as OSX will only read NTFS partitions unless you install an App such as Paragon NTFS or Tuxera NTFS.

  • Fastest and best external hard disks for video use with Imac?

    What is the fastest and best external hard disks for video use with Imac (I believe it is currently not possible to use Esata on the Imac).

    For DVCam. HDV etc, I'm a fan of the G-raid drives. From personal experience they
    are very solid performers. I only had one issue with a new drive that was replaced
    next day. They are not the cheapest drives to be found but the build quality
    is excellent. Check out:
    http://www.g-technology.com/products/g-raid.cfm

  • How can I get my hard drive icon back on the desktop

    I just erased my hard drive on my Intel MacBook getting ready to give it to my daughter. I had the Snow Leopard install disc in the drive and used Disc Utility to erase the drive. I then installed Snow Leopard and everything went smoothly without a hitch.
    Other than -- the icon for the hard drive is not on the desktop! I can open a Finder window and see everything that should be on the drive after an erase and reinstall, but the drive is not there.
    How can I get it back?
    TIA
    I am so sorry! This question has been answered more than once. I searched but didn't find it. When I posted this, however, the list of similar questions that pops up next to the message sent me to a simple fix and now all is well.
    Again, sorry for having cluttered up the board with this question.
    Thanks.
    Message was edited by: Martin Rice

    Choose Preferences from the Finder menu, click on the General tab, and check the box for it.
    (98814)

  • Can i get total hard disk space in a machine?

    Hi,
    Can i get the total hard disk space in a machine?.
    Thanks.

    >>
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=405
    7701
    which of course was not a bug at all but a feature
    request...Working as designed ;-)

  • How Can i connect external hard disk to Ipad?

    I want an information or procedure how should i connect my externl HD to I-Pad 4

    There are some wireless external hard drives that can be used with the iPad.
    Best iPad External Hard Drive Storage Options
    http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
    iPad Storage Solutions
    http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
    SanDisk Connect Wireless Media Drive
    http://www.sandisk.com/products/wireless/media-drive/
    WD My Cloud
    http://www.wdc.com/en/products/products.aspx?id=1140
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
     Cheers, Tom

  • External Hard Drive is Not Showing Up on Desk top?

    My external hard drive is not showing up on my desk top any more. When I tried to reconnect it I get the follow message.
    You have inserted a disk containing no volumes that Mac OS X can read. To use the unreadable volumes, click Initialize.
    Help what should I do? I have 50 GB of music on it and it's never had this problem before.
    Thanks
    Jeremy

    Norton has a bad reputation because they have not kept up with changes in the Mac file structure. Norton version 8 is the one you should be using, if you choose to use it. Earlier versions will likely damage your directory, possibly beyond repair by other utilities.
    Any time you use any Disk Repair Utility, it is somewhat of a crap shoot. It may or may not be able to make the repair, and you may or may not lose a few to very many files in the process. The program best respected in this arena is Disk Warrior. If you choose to buy it, pay very close attention to which version you are buying, as the latest version CD (intended to boot 10.3 or 10.4) may not boot on your Mac.

  • On Lion OS why do new icons not appear on the desk top either from drag and drop of scanning onto

    There seems to be an error on Lion OS which I installed recently. If you drag files onto the desk top they disappear. However, they can be found in finder. If you scan direct to the desk top they also do not appear. Is there a bug?

    Sounds to me like you have a corrupt plist file.
    First thing I would try would be to simply relaunch your Finder and see if that sorts your problem.
    >ForceQuit>Finder>Relaunch
    If not navagate to com.apple.desktop.plist and delete.
    Finder>GO>(option Key)Library/Preferences/com.apple.desktop.plist
    or in Finder shortcut ( ⇧⌘G) copy and paste:
    ~/Library/Preferences/
    delete the com.apple.desktop.plist
    Relaunch your Finder again. 
    The deleted plist will rebuild itself to default setting after Finder relaunch
    Report back on your sucess or failure.

  • Upgraded to 10.4.9 on MBP 15", now, I can't mount external hard disk!

    Hi all,
    I have a LaCie 500GB drive that I've been using perfectly since I've gotten it, but alas, I upgraded to 10.4.9 and it no longer mounts either by it's USB interface or by its Firewire interface.
    My machine is a MBP 15" (2.16 GHz, 2 GB Ram), which works perfectly in all other respects and is now running 10.4.9.
    The symptoms are that when I plug it in, I usually get the message, "The disk you inserted was not readable by this computer" with the options "Initialize...", "Ignore", and "Eject". So far, I haven't pressed any buttons except Ignore or Eject. Sometimes, I do not get this message, but it still doesn't mount, it just silently does nothing.
    So, after pressing "Ignore", I've opened Disk Utility and had a look. The physical drive appears and there is one volume named "disk2s6" which for all purposes is probably my normal, logical volume (partition). However, last time it mounted on this machine, it was named "Archive". This logical volume is grey and will not mount no matter how many times I press the "Mount" button. It just does nothing.
    OK, so, while I'm in Disk Utility, I ran Verify Disk and, after the normal routine, it comes back with "No Repairs Necessary". I've also tried "Repair Disk" and this comes back "No repairs were necessary", again after the full, normal processing of the various things.
    I also performed a Fix Permissions on my startup-volume, but this didn't help either.
    Next test was to mount the disk on my MacMini (PPC) instead, also running 10.4.9. It mounts perfectly and it properly comes up with the name "Archive" as expected.
    I've then tried to mount other devices on my MBP including a USB memory key, and another external Firewire drive. These both mount perfectly on my MBP.
    While I was at this, I've also tried new USB and Firewire cables, this didn't affect my results in the least.
    I've finally verified that there is nothing in /Volumes out of the ordinary that might prevent it from mounting by doing a "sudo ls -la" whilst in /Volumes/. There's not a thing that would affect the mount-point.
    I then disabled my folder actions that I've been running on the directory /Volumes *I had an action used to backup my USB key). Unfortunately, I still have the same issue.
    Finally, I downloaded the Combo 10.4.9 installer, booted into Safe Mode (to trigger an automatic fsck), then rebooted and installed the 10.4.9 Combo installer, in case there was some weirdness in the Software Update upgrade to 10.4.9.
    What stone have I left unturned? Why won't this drive mount, but it works perfectly elsewhere? I want to get back to using Aperture on my MBP and my entire photo Library is on this disk (well, and backed up on another external drive, but it lives normally on my MBP).
    MBP 15" 2.16GHz + LaCie 500GB Ext Firewire drive Mac OS X (10.4)
      Mac OS X (10.4)  

    Here's some additional info...
    When executing a manual mount: I get this:
    sudo mount -v /dev/disk1s6 /Volumes/Archive
    /dev/disk1s6 on /Volumes/Archive: Incorrect super block.
    During a normal plug-in-the-disk-and-expect-it-to-mount-automatically, this is what diskarbitrationd reports:
    22:45:40 iokit [0] -> diskarbitrationd [41]
    22:45:40 created disk, id = /dev/disk1.
    22:45:40 created disk, id = /dev/disk1s3.
    22:45:40 created disk, id = /dev/disk1s4.
    22:45:40 created disk, id = /dev/disk1s6.
    22:45:40 created disk, id = /dev/disk1s2.
    22:45:40 created disk, id = /dev/disk1s1.
    22:45:40
    22:45:40 diskarbitrationd [41] -> diskarbitrationd [41]
    22:45:40 probed disk, id = /dev/disk1s6, with hfs, ongoing.
    22:45:40
    22:45:40 diskarbitrationd [41] -> SystemUIServer [289]:13363
    22:45:40 dispatched callback, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1s1.
    22:45:40 dispatched callback, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1s2.
    22:45:40 dispatched callback queue.
    22:45:40
    22:45:40 SystemUIServer [289]:13363 -> diskarbitrationd [41]
    22:45:40 dispatched response, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1s1.
    22:45:40 dispatched response, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1s2.
    22:45:40
    22:45:40 diskarbitrationd [41] -> diskarbitrationd [41]
    22:45:40 probed disk, id = /dev/disk1s6, with hfs, failure.
    22:45:40 probed disk, id = /dev/disk1s6, no match.
    22:45:40
    22:45:40 diskarbitrationd [41] -> SystemUIServer [289]:13363
    22:45:40 dispatched callback, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1s6.
    22:45:40 dispatched callback queue.
    22:45:40 dispatched callback, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1s4.
    22:45:40 dispatched callback, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1s3.
    22:45:40 dispatched callback, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1.
    22:45:40
    22:45:40 SystemUIServer [289]:13363 -> diskarbitrationd [41]
    22:45:40 dispatched response, id = 914042DE:00000000, kind = disk peek, disk = /dev/disk1s6.
    22:45:40
    Mac OS X (10.4)
    Mac OS X (10.4)

  • I plugged in my external Hard drive everything was going fine, I dumped lots of music into it. Now I can find the external hard Drive Icon. I have done a search using spotlight and WD My Passport doesn't show up.

    Any Idea as to where it went?

    What does this have to do with iCloud on your iOS device (i.e. this forum you've posted in)?
    Have you tried unplugging and plugging the hard drive back in? Tried turning it off and back on again?

  • How can I get HP Smart Print icon to appear on Bing bar?

    I installed Smart Print and activated it, but I cannot find an icon on my Bing bar.

    I HAVE DOWNLOADED SMART WEB PRINT BUT CAN NOT FIND THE ICON TO USE IT

  • External Hard Disk not showing up on Finder

    Hi
    My HP Pocket Media Drive (USB), when plugged into my MacBook, does not show up on the Finder, even though it shows up on System Profiler. It only shows up on Disk Utility in certain occasions (such as after shutting down and starting up again). I have checked my Finder preferences, that external hard drives are shown on desktop.
    I have tried resetting my PRAM and SMC too, but I still can't access the hard disk.
    Any help will be appreciated.

    Ian Sen wrote:
    I get the following message in a window:
    “connecting to server: resolving alias to… (my itunes folder on the external disk).”
    On the chance that your Mac has a phantom folder in its Volumes folder, with that external drive not mounted, invoke the Finder menu option Go > Go to Folder. Enter "/Volumes" (without the quotes) in the field and click "Go". In the resulting window if you see anything with a name that resembles your external drive, trash it.
    Anyone know how I can have the external hard disk automatically mount onto my desktop (and thereby bypass the need for several click-thru’s via the finder window)?
    Once you're able to mount that external drive, open the Accounts panel of System Preferences and click on the lock in the corner to authenticate if needed. Select your account on the left, then the "Login Items" tab. Drag the mounted disk icon into the window then close System Preferences. That disk should now mount when you log in. A Finder window will open, but you can close that manually. If that bothers you sufficiently, if you search these discussion groups you may be able to find threads that discuss how to work around that.

Maybe you are looking for

  • USB to Serial port delay

    I have some LabVIEW code that communicates with a TI MSP430 development board via a USB serial port simulator. The hardware that does the serial to USB conversion is part of the development board. how the application works is the LabVIEW code sends a

  • TS1398 Can't connect to my Network

    Hooked up my modem to my airport router and went through the steps on my iPad to get the router going. All worked fine, green light on router, and I can see my network but can't connect to it from anything. Cable company doesn't know either, they can

  • Rev. Black and White- display

    I recently noticed the function to inverse black and white (and many other things). I was just wondering if there were any harmful implications in doing so. Rather it be harmful for an extended period of time, or anything at all really. Frankly I don

  • All activity prices are manually entered (Message no. KP211  )

    Dear All, I have maintained Activity Rates through KP26. On Activity Master I have set Act. price indicator = 5. Now when i am executing KSII it is giving me error message as : All activity prices are manually entered Message no. KP211 Diagnosis All

  • Activity search by Completed status and End Date

    Hi All, When i try searching for an activity based on the date on which the status was set to Completed, the system does not show any results. 'Criteria used are Activity Type, Status = Completed, End Date.' If i choose an End date = Date on which th