Can't get flash to work on Safari

Hey so recently I wiped my hard drive and reinstalled snow leopard to get rid of a messy computer full of files. Anyways when I reinstalled snow leopard I had to download adobe flash again. The download and install go fine but when I open up Safari it says I don't have flash player installed when I try to watch Youtube or Facebook videos. The weird thing is that Firefox has it installed and works fine. Any help?

HI,
Try uninstalling your current copy of Flash, reinstall new, then repair permissions.
Go here and follow the instructions. Uninstall Flash
Install the most recent version of Flash here.
Now repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
You must uninstall the old copy first !!
Carolyn

Similar Messages

  • Cant get Flash to work in Safari!

    I have several Mac set ups.
    On some of them, Flash content plays back fine in Safari.
    But on this system :
    Leopard 10.5.5
    Model Name: Power Mac G5
    Model Identifier: PowerMac7,2
    Processor Name: PowerPC 970 (2.2)
    Processor Speed: 1.8 GHz
    Number Of CPUs: 2
    L2 Cache (per CPU): 512 KB
    Memory: 3 GB
    Bus Speed: 900 MHz
    Boot ROM Version: 5.1.4f0
    I can not get Flash to work, EVER!
    Drives me crazy.
    I have installed the latest version of Flash over and over.
    It never takes.
    I've had this problem for about a year.
    I've read these forums over and over.
    I've asked my tech guy at work a dozen times.
    He cant figure it out.
    Is there no solution other than using Firefox?
    This is ridiculous.

    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
    Note that Adobe requires you to uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
    and also that you follow the instructions closely, such as closing ALL applications first before installing.
    Some users have mentioned that the latest Flash Player versions (v.9.0.115.0 and 9.0.124.0) in some cases conflict with Leopard 10.5.4, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1
    You should also ensure that you have downloaded and installed the correct version for your Mac of Security Update 2008-007. (N.B. Security Updates require both a restart and a permission repair.)
    But the latest version 10 of FlashPlayer should work fine.

  • Can't get Flash to work in my IE 9

    I Can't get Flash to work in my IE 9. I have gone through the other fixes from this site, but still can't get it to work.  Any suggestions?

    Have you tried the suggestions outlined in these two faqs?  If so, was the shockwave component found and enabled?
    Enabling Flash Player in Internet Explorer  
    ActiveX Filtering in Internet Explorer
    Thanks,
    Chris

  • [SOLVED] can't get flash to work

    First i tried copying the flashplayer.so to /usr/lib/mozilla/plugins dir, but it didnt exists yet, so i did a searh and i found. This http://wiki.archlinux.org/index.php/Ins … bit_System  tried installing nspluginwrapper but it didnt work after restarting firefox. Tried manually installing the flashplater.so files again, since there was a dir there. Tried pacman -S flashplugin after i found that to be the most up to date way. None of this has worked, any ideas? I installed the 10.0.42.34 version. I never restarted anything other than firefox either. Thanx for any help.
    Last edited by leetstalker (2009-12-23 08:20:13)

    Yes, sorry about the editing, i just spent 10 minutes looking for the edit buttons and then the submit buttons, my new style made them invisible:P . I had a thought though. Before i installed gnome i had installed firefox, could i have installed a second copy while installing gnome or done something else to cause me difficulty? I like firefox but i guess i'll try getting flash to work in some other browsers and see how that goes.  Also, firefox isnt detecting any plugins in its add-ons section, perhaps thats a clue?

  • Can't get Gestures to work in safari under os7?

    Since downloading ios 7 I can't get gestures like back a page or the album view to work. Is there
    a certain setting I should use in Settings?

    Are you looking for the Rolodex  feature on the that's on the iPhone.

  • Can't get Java to work on Safari Windows

    Have downloaded latest Java for Windows, but doesn't work with Safari. Am running windows XP. Any help?

    I'm not wrong. Java in Safari does not work for me and, judging by the posts in this forum, for the vast majority of Safari users on Windows. Replying "it works fine for me" is not a helpful response.
    Just to humour you I tried the link in your post and this was the result:
    http://www.flickr.com/photos/42042480@N00/692627803/
    I get the same result for all Java applets with Safari. They all work fine in IE7 and FF2. And for all those telling me to download the plugin, if you had bothered to read my earlier post you would know that I have downloaded the plugin, which is no more than the latest JRE from Sun.
    Michael.

  • Can't get flash to work in firefox

    On I. E. the flash movie works fine but when it is tried in firefox it doesn't appear. A right click of the mouse shows that the flash is there but it doesn't work. Is there something that has to be added or removed in order to make this work properly in firefox? Going to other sites and the flash works fine except when it comes to my site? There is a possibility that it is my coding but it was cut and paste from adobe. The rationale is that firefox should be able to handle this code but it doesn't? Any ideas?

    Not meaning to give you mis-information. Am struggling to overcome this problem and have been able to get the firefox to host the embedded swf.
    What has happened is that the web page has been recreated specifically for firefox. Being under the impression that if the embed was done on I. E. then it would tranfer to firefox automatically. This doesn't seem to be the case. In a workaround it was decided that re-doing the page would be the best way to go.
    Your assistance has been and is very beneficial in that you made me aware of the publish aspect in flash. Imagine Homer Simpson giving his "D'oh!"
    Not sure if what is being done is right but it works. Am able to send it to the server, able to see it working as needed and am now looking at reading the browser to send the right page.
    Were it not for your information then there would be a whole lot of struggling left to do. Let me know if this is the right track, please.
    Thank you!

  • How can I get Flash to work with my N-trig stylus on my Surface Pro 3?

    Flash doesn't work at all with the N-trig stylus on the Surface Pro 3 with the latest WinTab drivers installed. The only freehand marks I can make create large useless lines that extend way beyond the lower-right corner the stage. Is Adobe aware of this?

    Many people (including me) are also having the same issue. There are several other threads about this too on adobe and Microsoft websites. Some people are even having this issue with tasblets other thsn the surface pro 3, and this is COMPLETELY UNACCEPTABLE BECAUSE WE ARE PAYING MONTHLY FOR A PROGRAM THAT IS RENDERED USELESS BY THIS BUG!! I mean in almost every thread an adobe representative says the problem has been fixed internally and will be resolved with the next update, BUT WHEN IS THAT!!?? I mean if they are gonna sit here and have issues like this, they need to update them NOW not later, as we are paying EVERY MONTH and get updates like every 4-6 months. So instead of getting frequent minor and small updates to address things like this, they decide to leave us paying for a broken program for months until they're ready to release  big update which will probably come with more bugs that we'll have to wait forever to get fixed all over again,
    but LONG STORY SHORT:according to many adobe reps "the issue has been fixed internally and will be resolved with the next update"

  • Can not get Flash to work

    My computer was reimaged the other day and since then I have had to reinstall a number of programs.  Today when I tried to view an online show I found that my flash driver was no longer there.  I have tried to install it through the adobe site but not having any luck getting the program to run.
    I have version 10,3,181,14 installed.  I have Windows 7 64 Bit systtem runing Professional.  I am using IE9.  In my C: drive under sys I have a Macromed folder with bot the Activex10 .exe file and Flashutil10 .ex file both of which have been installed.  During the download process it used Adobe Download Manager and when it seems to get towards the end it disappears and no further instructions are seen.
    I go back into the shows and still it does not work.  Any ideas?  Much appreciated.

    Ausbren wrote:
     During the download process it used Adobe Download Manager and when it seems to get towards the end it disappears and no further instructions are seen.
    I think it would be best to start with a clean reinstall:
    download the FP uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html (save it to disk);
    download the installer (EXE) from http://www.adobe.com/products/flashplayer/fp_distribution3.html (save to disk);
    close all browser windows, then run the downloaded uninstaller, followed by the installer.
    Now can you see the Flash animation (rotating red 'F') at http://www.adobe.com/software/flash/about/ ?

  • Can't get flash to work in browser

    I am having trouble getting my flash file to work after I
    upload it to my server.
    Any ideas? The error message is :
    Object expected line 88:
    AC_FL_RunContent( 'codebase','
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0','wid th','584','height','420','title','Flash
    introduction','src','smjb00001','quality','high','pluginspage','
    http://www.macromedia.com/go/getflashplayer','movie','smjb00001'
    ); //end AC code
    /* here is the code */
    <script type="text/javascript">
    AC_FL_RunContent( 'codebase','
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0','wid th','584','height','420','title','Flash
    introduction','src','smjb00001','quality','high','pluginspage','
    http://www.macromedia.com/go/getflashplayer','movie','smjb00001'
    ); //end AC code
    </script><noscript><object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
    width="584" height="420" title="Flash introduction">
    <param name="movie" value="smjb00001.swf" />
    <param name="quality" value="high" />
    <embed src="smjb00001.swf" quality="high" pluginspage="
    http://www.macromedia.com/go/getflashplayer"
    type="application/x-shockwave-flash" width="584"
    height="420"></embed>
    </object></noscript>
    Any help greatly appreciated, Julie

    Please post a link to your site so we can see. Have you
    uploaded the
    Scripts folder DW created?
    Alec
    Adobe Community Expert

  • I can't get Flash to work with Pogo games.  Troubleshooting advise didn't help?

    l

    You don't specify an OS or browser, but based on everywhere I've seen this, I can pretty well surmise that you're using either Windows 7, 8, or 8.1 and Internet Explorer 11.
    Your problems come from the abomination Microsoft calls a browser---Internet Exploder 11.
    IE has always been the problem child of browsers, but 11 has got to be the biggest pile of garbage to come out of Redmond, WA since Vista. They rewrote the "User-Agent Strings", which websites use to identify the browser and provide the proper content for it, like ActiveX specific things. Some sites now ID it as Gecko (Firefox) while others ID it as Webkit (Chrome or Safari). Problem is, that when the content is adjusted for those User-Agent Strings, it REQUIRES the appropriate browser engine, which IE doesn't have (IE uses a Trident engine). EVERYTHING falls apart after that.
    So far, Microsoft has made NO indication that they have any plan to fix it soon.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using a different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • Can't get flash to work as 'installer' opens a script file.

    I've downloaded the latest version of flash from the website but when i open the file there is a load of script and the installer doesn't start. Can anyone help me with this?

    Also youtube works, not sure if that uses flash or not but everything else i need deosn't work. Example from Facebook:

  • How do I get flash to work on safari os 10.8

    Flash will not run on iMac with os 10.8
    Works and all others.
    Plug in missing.
    Will not work after new instal

    From the Finder click Go>Go to Folder and type in /Library/InternetPlugins. Remove the FlashPlayer plugin to the Trash and empty the trash. Also there may be a Disabled Plugins folder in /Library. Do the same. Restart and download & install FlashPlayer from Adobe's website.

  • HT4108 I have a projector and I want to show output video all the time,but I can only get it to work on safari

    I have a projector and I was looking for an app that would allow output video all the time

    The one you are looking at I believe is an older model and does not have very good reviews for working with an AppleTV2 / iPad 2 setup.
    Here is the one that has worked for our district:
    http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC/ ref=pd_cp_e_2
    I can't say if the one you are referring two works or not, however I can say that based on the reviews, it looks like you may run into problems with the $45 version.

  • Help! I can't get flash to work.

    All I am trying to do is go to abc.com to watch an episode of
    a show but it keeps telling me that I need a macromedia flash
    player downloaded. I have downloaded, uninstalled, re-downloaded,
    re-uninstalled, etc. for the past 2.5 hours and have accomplished
    nothing! I don't know what happened last week I was able to view
    the videos on the site with NO problems.
    HELP! I've tried going into Internet Options and adjusting
    things there and I am just out of ideas.......
    Anyone know what to do to fix this?

    same damn problem I was probably having...When using IE and
    deleting temporary internet files it disables/corrupts/removes
    proper function of the adobe flash player....You can reinstall all
    night long and it will claim a "successful" installation but, it is
    not....YOU MUST FIRST UNINSTALL ADOBE FLASH PLAYER USING THE ONLY
    TOOL THAT WILL DO THIS WHICH IS THE FLASH PLAYER UNINSTALLER FROM
    THE ADOBE WEBSITE....BE SURE AND SAVE IT TO YOUR DESKTOP BECAUSE
    YOU WILL BE USING IT FOREVER.....Once you have used the uninstaller
    program you can then successfully and truthfully download the
    latest adobe flash player..............
    Adobe
    Uninstaller at bottom of page
    Further description of the problem: When you clean out your
    temporary files and/or temporary objects some critical part of the
    Flash9 goes with it and your flash will NOT operate...you can try
    and reinstall it all night long...your dead...nothing....you must
    FIRST GO TO THE ADOBE UNINSTALLER (hyperlink shown above) and run
    that program to uninstall COMPLETELY the flash9....Having done
    that, you can now install the flash and this time it will
    take......
    another answer in addition to the one described above is to
    upgrade your IE to IE7. This seems to eliminate the problem
    concerning the functionality of the Flash9 and PC
    maintenance….keep your fingers crossed.
    Let me know the results………..

Maybe you are looking for

  • Help Required: Updating Multiple dynamically created rows in database

    Hi All, In my jsp page I am retriving the values from the database and displaying in the jsp page, the columns are studentID and student name. Now for each studentID i am creating two textfields as date of birth and parent name. my code snippet is as

  • Installing Oracle Client in 9.2.0.8

    I was trying to install oracle client and in OSS 1017418, it states: "Confirm that /oracle/client/92x_64/lib is a link to /oracle/<DBSID>/920_64/lib" Can anyone advise me how to do this in AIX 5.3? I know the command is "ln". Should it be a soft link

  • Logoff scrip doesnt work ..after certain time threshold.

    Hi im setting up PCs for general use in computer lab, with internet cafe like structure where one main computer will control every activity of the rest. One of thing i made is setting up the script to force windows to shut down if user log off the wi

  • Updating text to SAP purchace order

    Hi,   i am working on an inbound idoc , related to purchace order.   i have a requirement of updating the header and item text to the SAP purchace order . how is this done , should i use a bapi for this .Please reply to me as soon as possible . Thank

  • JoinRowSet problem

    I have used JoinRowSet to join 3 tebles. JoinRowSet join = new JoinRowSetImpl(); create table persons(name varchar(30),design varchar(10),dept varchar(10)); create table salinfo(design varchar(10),increment int); create table sqlscale(increment int,g