Can't get Fn keys to work after Windows 7 install

I have completed the Windows 7 install but can't get the Fn buttons to work. I have found and installed the 'flash cards' which seems to do a similar thing but would like the proper Fn button as well.
Does anyone know which of the drivers does this?
thanks,
Tim.

Hi
Hardware FN keys doesn't work in Vista or Seven even if you had TVAP installed.
You can use the Key via Flash cards, to do that you need to open flash card
settings and select "allow to show flash cards on mous over" (or someting similar).
Now you can use the functions of flash cards, but you can't use it via key, i'll hope with the new relase of TVAP could fix that problem.

Similar Messages

  • How can I get my printer to work after a Yosemite update?

    How can I get my printer to work after a Yosemite update?

    Hi there michaelfromepsom,
    You may find the printer troubleshooting steps in the article below helpful.
    Troubleshooting printer issues in OS X 
    -Griff W.  

  • I can't get my iMessage to work after changing Apple ID passsword

    How can I get my iMessage to work after changing my apple password?

    Well did you change the apple id in imessage?
    settings - message - add your new id and delete the old id.
    Or turn off imessage and then back on to reactivate with your new id.

  • Can't get Palm Zire to work with windows 7

    Can't get palm zire to work with windows
    Post relates to: Palm Pilot

    Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista.  It's all there. 
    After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • How can I get photoshop CS2 to work with Windows 8.1?

    how can I get photoshop CS2 to work with Windows 8.1?

    Have a look at
    http://forums.adobe.com/message/4976720
    Cheers
    John

  • Can't get Nokia Conversation to work after I updat...

    Hi!
    Why can't I get Nokia Conversations to work after i updated my N86 to the latest FW?
    Is it that Ovi Contacts client that is blocking it?
    What is the name of Ovi Contacts in the installed aplication list?
    Thanks!..
    N8 FW: 022.014 -- Please separate Artist & Albums!
    N86 8MP FW: 30.009 -- We need a new FW on this phone!
    E51 FW: 410.34.001
    E70 FW: 2.0618.07.10 -- Why no v3 for my code?

    Welcome to the Adobe Forums.
    To better assist you with this issue we need to know:
    What is your operating system? (Windows or Mac) (XP, Vista, 7, 8)
    What browser do you use? (Internet Explorer, Firefox, Chrome, Opera, Safari)
    Are you seeing any error messages?
    Can you provide screenshots of the error messages (if applicable)?

  • I can't get the connect to work after base installion.

    Hello, everyone, I am new to Arch Linux.
    I follow the installation guide install Arch Linux, Everything run pretty smooth, except at the part when I need to choose the package, I am not so sure what I am doing. So I choose everything except for the thing that I am sure I would never need.
    When the installation is complete, I try to go to the next setup which update my system, but some how, I can't get the connection working, switch mean, I couldn't do anything beyond that. (both wireless and wired network, BTW I am using DSL and I do try the adsl thing)
    Every thing seem make sense to me during the installation, but I just can't get the network connection working.
    BTW: my laptop is a Toshiba portege M100.
    Any idea?
    Thanks
    Last edited by ioky (2008-06-25 06:18:58)

    Try typing in:
    dhcpcd eth0 (or whatever interface you are using)
    and hit enter, I had the same type of problem and this woke up my network connection.
    Edit: Also, once you gain your connection up and running, you might want to install ifplugd.  It is a daemon which will automatically configure your Ethernet device when a cable is plugged in and automatically unconfigure it if the cable is pulled, which is good for laptops.  Once installed make sure you put it in /etc/rc.conf under the DAEMONS section.
    Here is some info in the wiki http://wiki.archlinux.org/index.php/Configuring_network
    Last edited by ArchGentoo (2008-06-26 01:22:45)

  • I can not get my mouse to work after changing the batteries

    I can not get my wireless mouse to work after changing the batteries

    Some ‘dumb’ questions just so we don’t assume what you have done:
    Batteries installed with both + poles pointing to the top as you hold the mouse?
    Mouse switch has been returned to the ‘on’ position - do you see a green light?  First it will be solid green and then flashing green as the mouse tries to pair with the computer.
    Try clicking the mouse a few times as it’s trying to pair.
    If you don’t see a green light, try wiping off all battery contacts and reinserting the batteries.  If still no green light and the mouse switch is ‘on’, are these old rechargeable batteries that been recharged many times or are they fresh normal batteries (not rechargeable batteries)?

  • I can't get my bluetooth to work after upgrading my iphone 4 to ios 6

    After I upgraded my iphone 4 to IOS 6, i can't get any of my bluetooth connections to work.  Both my headset and my car are not recognized.  I validated that Bluetooth is on in the configuration, but it just keeps searching for devices and never recognizes them.  Is there a setting I'm missing?

    What does the manual say on the wireless speaker on how to connect to other devices?

  • I REALLY hate the page up/page down functions that automatically loaded with the program. I LIKE to use my page up/page down keys for web browsing. How can I get these keys to work properly, or any of the keys to work "normally" as I have in the past?

    When using certain keys on my keyboard, they don't work like they are "intended" to be used. I HATE how Firefox has changed those functions without my request. How can I get my keyboard to function as it "should"?
    Thank you.

    When using certain keys on my keyboard, they don't work like they are "intended" to be used. I HATE how Firefox has changed those functions without my request. How can I get my keyboard to function as it "should"?
    Thank you.

  • Can't get the かな key to work on Japanese keyboard

    I've tried almost everything I could but I can't seem to get the かな or the 英数 keys to work. Can anyone help me get them programmed or tell me how to use them correctly?
    I'm using the Apple Japanese keyboard.
    Thanks

    Eajix wrote:
    Yes, every single other key works and the keys are in the right spots.
    Thanks for that info, which is important.
    Can you switch between Kotoeri and US input by using apple/command plus space?
    Do you know Japanese well enough to use the Japanese forums at
    https://discussionsjapan.apple.com

  • Satellite P305-S8820 - FN key not working after clean install of Windows 7

    Hi,
    I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
    Any ideas?

    Hello John
    You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
    Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
    You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
    Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

  • Cannot get USB port to work after re-installing of SP2 on Satellite Pro L20

    After re-installing XP Home SP2 and downloading all the updates & Drivers from here I cannot get my USB port to work properly, if I have more than one peripheral plugged in it says "Bandwidth Exceeded".
    I have a Behringer BCD2000 which is a souncard/midi controler for DJ mixing, it worked fine before i reinstalled windows, now it clicks and pops when playing tunes, also the ASIO doesn't work when I run Traktor (Dj software) and the program freezes. Any other external sound card wont work either. I've been all through the device manager no conflicts apart from an ! over Serial under hidden devices.
    I'm lost, is my only option buying a PCMCIA sound card, it worked fine before so surely there is a software solution to this?
    If anyone can help I'd be most appreciative.

    Hello
    Try to disable USB Error Detection:
    1. Right-click My Computer and then click Properties.
    2. Select Device Manager to view the Device Manager
    3. Locate and click the Universal Serial Bus Controller entry.
    4. Double-click Universal Host Controller and then click the Advanced tab of the Universal Host Controller Properties.
    5. Put a checkmark in the box for Disable USB Error Detection. Click OK.
    6. Restart the computer to see if "Bandwidth Exceeded" message occurs again
    Did you use recovery media to reinstall WXP? When someone write it worked before and now not it is really not easy to say why this happen. Try to configure notebook as before and maybe it will work again. Behringer BCD2000 is not known to me and I dont know how it works and which software must be preinstalled there.
    Can you use different USB devices like external HDD, USB mouse, USB memory stick or printer?

  • FN keys not working after Windows reinstallation

    After a reinstall of windows my fn keys do not all work, some do but the small icon that used to appear that shows the fn button process whilst using it does not come up either
    What driver do I need to reinstall?
    Thanks in advance

    Hello
    I dont know what notebook and Windows you have exactly but if you use Vista or Windows 7 you have to install Toshiba Value Added Package and Flash Cards Support Utility. After this your FN keys will work again!
    Everything can be downloaded here:
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  • Boot keys stopped working after Leopard install

    I have seen others having this problem in another thread but no answers, so thought I'd give it a go.
    After reading these threads finally got Leopard to install and run okay. Many thanks all. But, along the way, my boot keys stopped working. It doesn't matter what I hold down, whether 'c' or 'cmd-opt-p-r' or 'shift' or any other key combination the machine just boots straight into Leopard.
    I have tried resetting the PMU (or whatever it is these days) via the internal button in desperation but still no luck.
    Anyone with any ideas?

    Same problem here, so I'll pull this post up. No key works.
    I always have to go to the Start Drive (or whatever it's called in english) in Preferences Panes and choose the partition I wish to start directly in OSX or Windows for booting back to OSX. This is very annoying. Alt key won't show up any possible boot disk although their both internal drives.
    If someone would kindly post any ideas how to change that, would be great. I've done a fresh install, with a Time Machine recovery, but this didn't seem to help.
    EDIT:
    I found another subjet here from november '07:
    http://discussions.apple.com/thread.jspa?threadID=1224639
    it seems the new Apple Keyboard is the origin of the Problem on iMac Core Duo. Apple techs said that a new firmeware should be coming before the end of 2007 (but it's february 2008 now ?!?). Any other ideas how to get this work ? I'll write on Aplpe feedback page for sure. Maybe the other boot keys aren't working because of this keyboard too.
    Message was edited by: Nordlaser

Maybe you are looking for

  • Convert photoshop album SE 3.2 to Photoshop elements

    It seems simple enough. I have photoshop album SE 3.2 and it is working well with 8400 photos all tagged is various groups.  I downloaded Photoshop elements 8 and installed it(succesfully). I then tried to convert the database over.  It does 2% then

  • Last update vendor details.

    I wanted to know the details of all the suppliers who has changed the phone number or location or bank account etc from last friday to this friday. Is there any query that i could use to find it?

  • PL/TABLE using in oracle forms

    Good morning everyone: I have a problem I want to execute all my records through FIND button but I am not able to do this this is my below code I am using PL/SQL Table to hold the values in memory but whenever I pressed the find button it's give me l

  • Photoshop CC error menús blancos y más...

    Buenos días, en ocasiones, que ya son bastantes, y que creo que suele coincidir pero no estoy seguro, al seleccionar el menú contextual de la herramienta pincel corrector para elegir un tamaño...etc de pronto no aparece el menú contextual que debiera

  • Can't add calender events

    I can not add calender events on my Droid X. Key board does not appear . How can I add events to my calender