Can't get GeForce GTX 560 Ti card CUDA to work with new Premiere Pro CC 2014 version

In the past I've been able to get CUDA on my GeForce GTX 560 Ti card to work with Mercury Playback engine by adding "GeForce GTX 560 Ti" to the cuda_supported_cards.txt file. But with the new CC 2014 version of Premiere, that file isn't in the Premiere Pro directory anymore. Is there a way to get my GTX 560 Ti to be listed as a CUDA-supported card with CC 2014?

Okay, I figured it out. I installed the latest graphics driver and then opened the NVIDIA control panel. In there I selected "Manage 3D settings" and went to the "program settings" tab. I selected Adobe Premiere (adobe premiere pro.exe) from the list and under the "CUDA - GPUs" feature, I changed it to "Use these GPUs" and selected my GTX 560 Ti (which was the only one listed).
After doing that, I opened Premiere Pro CC 2014 and selected "Project Settings - General" and was then able to choose "Mercury Playback Engine GPU Acceleration" under Renderer (which had previously been unavailable).
Hopefully this will help someone else if they encounter the same problem.

Similar Messages

How Can I get my JayBird Freedom Bluetooth Earbud Headset to Work with my MacBook Pro-Retina

I have a 1st gen iPad and a relatively new MacBook Pro 15 Retina. As well, I also have a Jaybird Freedom Bluetooth Earbud Headset (Mic/Stereo Speakers). Finally, I have a Droid X (I'll explain in a minute why I mention this).
My BT Earbuds can pair with my iPad and my Droid X just fine. As a matter of fact, it can bind with my iPad for audio, and my Droid X for phone audio at the same time. However, even when the Droid X and the iPad BT is disabled (on both), my MacBook Pro will not work with the Bluetooth earbuds. I am able to pair them (it shows as a Jaybird Freed Headset, and shows that it can be used as an audio output/input device), but when I try to use the earbuds for audio, it almost hangs up for a few moments, then finally fails and reports that "there was an errr connecting to your audio device.." with the "stop using headset" as my only option.
My MacBook Pro Gen 2 with Snow Leopard used to be able to pair with this headset. I'm not sure if it is the OS or the newew generation laptop. I have seen a few other threads on this, but no fixes that work for me.

Just posted a problem I'm having connecting my Jaybird Freedom and iPhone5 (https://discussions.apple.com/thread/4716045). The Jaybirds connected fine with an iPhone4s and another (forgotten) device so I don't think the problem lies with the Jaybird. I'd be interested if you hear differently.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Can't get Blue Snowball mic to appear on Audio Hardware selections in Premiere Pro CC

I have attached a Blue Snowball Mic to my system (Mac) and when I go to use it for making voice overs in Premiere Pro CC the mic does not show up on my Audio Hardware menu under preferences, so I can't use it. Strangely the mic works fine with Audible CC. I did not discover any specific drivers online that would assist...not sure why there's a problem. Any ideas?
System:
iMac late 2012,
3.4 gHz Intel Core i7
16gb Ram 1600 MHz DDR3
NVIDIA GeForce GTX 680MX 2048 MB
OS X 10.9

Did you ever get your issue resolved? I had a CAD 37 usb mic that Premiere Pro CC wouldn't recognize. Then I got a Blue Yeti with the same result. My Imac recognized them both but Premiere Pro CC would not recognize. I have a 2013 Imac so I don't think it's a computer issue. When I had Premiere Pro 6.0 I didn't have a problem with microphones being recognized.

How can I get the updates for Photoshop CS5 to download to my new Macbook Pro where I have already installed CS5 from my original disk? I have tried many times over 2 days. I was able to successfully download the current version of Adobe DNG converter.

How can I get updates for Photoshop CS5 to download to my new Mac book pro where CS5 is already installed from my original disk? I have tried many times over 2 days. I get the same error messages re downloading error. I successfully downloaded the current version of Adobe DNG Converter & it installed perfectly. Help please!

The Adobe auto updater is highly unreliable.
You need to look for and download the update yourself and then manually apply it as per the detailed instructions on the download page:
Adobe - Photoshop : For Macintosh
~~~~~~~~~~~~~~~~~~~~~~
Please note that the Adobe Camera Raw plug-in must be updated separately, after you have updated Photoshop:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

NVIDIA Geforce 840M with HP Envy 15 Lapytop - working with Adobe Premiere Pro

I have had this HPEnvy for a fortnight and am wondering for how much longer. I use the laptop extensively for video
editing, often away from home. To begin with, everything was fine. Now, just a fortnight later, it will often start Premiere Pro with the "Video Rendering and Playback" options greyed out even though the previous day it wasn't greyed out. When this happens, playing back video within Adobe Premiere, it runs for a few seconds and then becomes very jerky and stuttery.
I have tried updating ALL video card drivers.
I notice that there are two video cards displayed in Device Manager. One is the NVIDIA Geforce 840M, the other sometimes appears as 'Basic Microsoft***" and sometimes as Intel***. Should there be two display cards showing?
I would expect you to point me at Adobe but I believe something is happening BEFORE Premiere gets a look in. The laptop seems sluggish when loading any software. Just for the record, I have uninstalled Premiere Pro CC and have restored the Laptop to it's "as delivered" condition. This took some time, of mcourse, but did not improve matters.
As things stand at present, I cannot use the Envy 15 for it's intended purpuse.
I would be grateful for any advice as to why this is happening. Has anyone else experieced it?
Many thanks for your time and expertese.
Alan S.
This question was solved.
View Solution.

A little further information, following a full day of trying this and that!
It MAY be associated with the power pack. If I remove the mains power pack, it reliably boots and when Preiere CC is run, it allows selection of the CUDA/Mercury Playback options. If I boot the laptop with the mains power connected, then Premiere CC will not allow selection in the CUDA/Mercury box in Project Settings.
BTW the profile notes say I am running Windows NT. That should read Windows 8.1 - I am not sure where the NT came from!
Thanks again,
Alan S

MacPro eSata Port/Card doesn't work with new Hard Disk

I just bought 4 x 3TB Hard Disc http://tinyurl.com/d2rglvn (specs of disc)
Which I put in Macally Enclosures to work on my Barracuda internal Hard Drive externally http://tinyurl.com/clg8yjo
I already have like 5 x 1,5 TB that works perfectly well with eSata connections (with exact same enclosures)
**My problem is that my 4 new Hard Discs works really fine with my Mac Pro but only with the USB connections but won't work with the eSata Connection. I tried it on a MacBook Pro with an ATA to eSata adaptor and it works perfectly fine (So my discs are not the problem) **
I am working on a Mac Pro (bought in 2007) - Mac OSX 10,6,8 and this is (I think) the card where I put the eSata :
PCI Card :
pci1095,3132:
Type:    Other Mass Storage Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x1095
Device ID:    0x3132
Subsystem Vendor ID:    0x1095
Subsystem ID:    0x3132
Revision ID:    0x0001
Link Width:    x1
Link Speed:    2.5 GT/s
I am kind of new using Mac and its support so what want to know is :
Do I need to update my PCI Card ? If yes how can I do that ?
If not, what can I do to make my disc work ?
My disks are eSata III (6GB/s) is it compatible with my Mac Pro ?
Thank you Very Much for your time

Difference between the disk that works in eSata and those that doesnt is this....
Works : ** 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5"
Doesn't Work : **3TB, SATA III (6Gb/s), 3.5", 7200RPM, 64MB
it is probably the problem but i don't know what to do to fix it !

How do i get a copy of IDVD and will it work with final cut pro x.

I have a new powerbook. I've purchased final cut pro x because express is no longer available. My Mac didn't come with iDVD and I can't find a suitable dvd authoring tool. Please... some suggestions for DVD authoring or how to get a copy of iDVD and will it even work with FCPx.

Call Apple they will sent out iDVD at no charge. (There are no realistic substitutes for iDVD.)
408-996-1010
800-692-7753
If you are still within your 15 day return period, nicely explain that you may return the computer without iDVD. That usually does the trick. You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
If that doesn't work you can purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

Getting comcast cable/internet...Will it work with my Macbook Pro?

We are getting Comcast tomorrow...we currently have AT&T internet and my Mac is always getting kicked off my internet, onto a "belkin54g" that barely works. This is getting really annoying, but tomorrow we are getting the comcast internet/cable thingy. So is comcast going to work with my laptop O.K.? or will we have trouble with that too? because I am really tired of being kicked offline all the time. Thanks!

It sounds like you're having problems with your router, not with your ISP. If that's the case, and you don't replace the router, you'll probably continue to have the same problems.

Can I get a plug-in to make old software work with Lion?

Uploaded and install Lion 10.7.2 onto my MacBook (2.4ghz, 2GB). Got it running, then discovered numerous, mostly photography-related software, no longer works. Pretty peeved. This includes:
Adobe Photoshop, InDesign, VersionCue and Illustrator
EOS Viewer Utility and Digital Photo Professional (for my Canon camera)
Acrobat 6.0 Professional
AppleWorks
Corel Painter
Microsoft Office
Real Player
I cannot afford to just buy new licenses so will have to switch back to Snow Leopard unless they fix this. Will I get my $30 back? Any ideas?
Thanks.

SavhStudent wrote:
I've discovered that all of these applications (programs) are PowerPC and are not supported within OS X Lion. Is there a Rosetta plug-in that one can get? Any news about Apple updated Lion to include one? Any other things I can try?
There is now and will never be any way for PowerPC apps to run on Lion.
You'll need to go back to Snow Leopard.
Call Apple and ask for a refund on your Lion Purchase

My mac has10.5.8 and should be compatible with new HP officejet pro 8600. I can't get it to install for wireless, nor to work with USB cable. Have tried downloading HP install directly from HP and it still doesn't work.

I just bought a new HP OfficeJet Pro 8600 printer. I have been unable to download the installation for wireless connection even though have had the assistance of Costco tech, HP tech and some advice from Apple. Because the system is MacOs 10.5.8 the error says it is incompatible, even though the product lists compatiblilty with 10.5, 10.6. I was advised 1 option might be to obtain Snow Leopard for installation, however am somewhat reluctant as the bo states 10.5 should work and Snow Leopard is 10.6, which is also listed as compatible. I am unable to get the printer to work even with USB cable. Too much time spent on this and I hate to start over with another printer because I'm afraid I might have the same trouble. Is Snow Leopard something I should get anyway? Help!

Snow Leopard has more compatible Java.
https://discussions.apple.com/docs/DOC-2455
explains more about upgrading to Snow Leopard.
If that doesn't work to fix the problem, then see my FAQ* on printing:
http://www.macmaps.com/printersx.html

Can i use my GPU NVIDIA GTX 980 with Adobe Premiere Pro CC 2014 ?

Hello,
Sorry for my english , i'm french.
I need your help because when i read a video in 4K , it's not fluid.
I have a GTX 980 and 16 GB Ram, Intel Core i7 3770.

Bonjour Gauthier,
I need your help because when i read a video in 4K , it's not fluid.
I have a GTX 980 and 16 GB Ram, Intel Core i7 3770.
Check your Project Settings > General. Under Video Rendering and Playback > Renderer, is it set to "Mercury Playback Engine GPU Acceleration (CUDA)?" If not, enable it, and then see if your performance improves.
Thanks,
Kevin

Can't get my mini dvi to video adapter to work with my tv

Ok so I bought a mini dvi to video adapter to hook my imac up to my tv, and I when I go to detect displays all it does is flash white for a split second, and then doesn't work
any suggestions?

OK... so I figured it out. Firstly, the RCA cable I was using was faulty. Secondly, I think the adapter I bought is also faulty. I found that it only works when it is hanging down from the computer... as in the computer is sitting on the edge of, say, a desk, and the the cable hangs over the side. If I move the cable upwards, it stops working. So, I'm going to call an Apple store and see if this is most likely the problem, and I'll probably exchange it.
Thanks again,
Zeb

How can I get my screen to show on an external monitor with a Macbook Pro that has no lid?

I recently purchased a Macbook Pro online that has no lid (no screen, no top to fold down, the whole shebang). I've been shown pictures of the laptop working to an external by the seller so for now let's assume that the port does work.
Details:
-Mid/Late 2007 15" model
-DVI connection to monitor
-Start-up chime does sound

Read here:
https://discussions.apple.com/thread/2056418?threadID=2056418&tstart=15

Can't get GeForce GTX 560 Ti card CUDA to work with new Premiere Pro CC 2014 version

Similar Messages

Maybe you are looking for