Can't get GTX 970 to render - it's still using the CPU

Hello guys.
I'm using trial of Premiere Pro CC 2014 on Windows 8.1 x64.
Decided to try out my new machine - i5-4690K, EVGA GTX 970 FTW, 16GB DDR3 2400 Mhz, Samsung 850 Pro.
So I have this test video 1080p 60FPS 1min 2s short which I'm exporting to H.264 same as source but lower bitrate.
With the software renderer it takes 3min20s.
I wanted to try out my GTX 970, so I ran the GPUSniffer and added "GeForce GTX 970" into my "cuda_supported_cards.txt". Restarted the machine, made new Project, selected GPU rendering in the Project Settings and gave it a go.
It took exactly 3min20s as before and checking in CPUID HWMonitor GPU usage was 0 and CPU was running full speed. So certainly not GPU Accelerated.
I'm using latest drivers, which is 350.12.
Any ideas what should I do now?
Thank you very much for your time.

Where does the video card fit in?
The video card and hardware MPE is not the holy grail. It helps in some circumstances to improve performance and rather significantly, but in other instances it does not help at all, as is indicated in the link above. People often think that installing a super fast video card will reduce export times by a significant amount of time. That is not true. It only helps in a limited number of situations. Keep in mind that:
Encoding to an export format is done by the CPU, not the GPU. No performance gain from a video card.
Frame rate changes, frame blending is done by a suitable video card, for instance exporting to 24P from 29.97i or 60P. Here there is a clear performance gain.
Scaling is also helped by hardware MPE, for instance going from 4K to HD or from HD to SD. Again a clear performance gain.
Rendering for preview is helped by the video card only for accelerated effects.
If any of the last three points are a major part of your workflow, then a good video card will speed up these parts of the editing by up to 15 times on average over software MPE.
For further information about video cards, see Tweakers Page - What video card to use?
From Tweakers Page - Exporting Style

Similar Messages

  • HT204074 All of our devices have the same apple id (2 iphone 4's & 1 Windows Comp..) How can we seperate them but also allow them to still use the same itunes account?

    I tried to ask a similar question before, however did not understand our issues well enough to even form a comprehensive question and the kind replies.
    I apologize, unfortunately I've yet to resolve our problem.
    All of our devices are under the same Apple ID & password (an IPhone 4s, an IPhone 4, and a Dell Laptop that uses Windows 7.) How in the world can
    we separate them (so we can both use our free 5GB under the iCloud storage that each of our IPhone's offer, but "also" still use the same shared ITunes
    account?
    As it stands right now, my son's phone (iPhone 4) is set up under our Apple ID & pw-which enables him to use the free 5gb's under the iCloud.
    I cannot take advantage of the Free 5gb's iCloud on my IPhone 4s, because it's all "my info." on my son's phone (my email address & pw=what we've always used for our shared ITunes acct.)
    A big fat mess I know, and don't even want to confuse things by asking about these SMTP's...1 thing at a time!
    Not sure if it is still on his phone, however in trying to resolve this issue last time I set him up with a MobileMe address. I believe I entered my info back into his phone because it created a bigger mess!
    Thank you in advance for any suggestions/help! It's taken me some time to gather the patience and courage to ask for help again in resolved this
    issue!

    I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
    What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
    Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
    Thanks again for "anyone" that can help me!!!

  • I can't get my iPhone to mirror on my tv using the av adaptor

    I can't get my iPhone 4 to mirror on my tv using the av adaptor any suggestions would greatly appreciated

    first of all
    only the hdmi and vga adaptors support mirror
    secondly
    only iphone4s, ipad2 and the new ipad support mirror

  • Can I disable Cellular data (US Data plan) and still use the Find My Iphone Service (GPS??) in France?

    I have a US Model iPhone 4 (ATT).  I'll be traveling to France for 2 months and I'd like to be able to disable my cellular data while on travel.
    My questions:
    - Can I do this and still access Wifi? I think yes
    - Can I do this and still use Skype? I think yes
    - Can I do this and still use GPS for the Find My iPhone Service?  I don't know....
    - If I can't do any of the above then what are my options?
    JC

    Find my Phone requires a data connection. If cellular data is turned off, it will be pretty much useless unless you are constantly connected to WiFi, which of course you won't be. Same with Skype, data connection required, so will work when connected to WiFi. Unlees the mapping data is stored locally on your phone, GPS will be useless, as the built in Maps app requires a data connection as none of the data is stored on your phone.

  • How can I get my site to render current page version, not the cached version?

    @

    Hi,
    To disable browser caching for a web page, try adding the following code to the Head tag of the page:
    To add the same:
    1) Open the page with Muse
    2) From the Page menu, select Page Properties
    3) In the Metadata tab, type in the code in the "HTML for <head>" field
    Regards
    Sonam

  • HT1349 I plugged my iphone into pc to upload my photos. itunes said I had to restore factory settings coz it wont sync. I did that & it wiped all my photo's. 2 yrs worth. I'm shattered. Can I get these back? I never wanted to use the itunes in the first p

    I wanted to upload 2 yrs worth of photo's into my pc using picasa. Itunes wouldn't allow this saying I needed to reset factory settings to be able to sync. So I did this and it wiped all my photo's. I didn't wan't itunes in the first place! I am devastated. I've lost everything.. Is there any way to get them back?

    Also it good to import your picture from your camera roll to your PC, so that way you have a back up of it and can always sync the photos back to your phone.

  • Can I turn off my cellular connection completely but still use the gps?

    On an old so, I forget which one, I used to be able to disable my cellular connection. I realise I can still do this with airplane mode but this stops the GPS working too. The main reason I want this as when I'm hiking I want to use my phone as a GPS device but without any signal my phones battery lasts about an hour. When I used to be able to disable it I could get a good 12+ hours of gps tracking.
    Thanks

    It that case I'll test an workaround this weekend to see if I'm able to use it more than one day:
    Disable Auto Screen Brightness and set Brightness to minimum
    Turn Off:
    Data Connection
    Wifi Connection
    Under Location Services, turn off
    Cell Network Search
    Traffic
    Above just to be safe because GSM services will not be initiated
    Reboot phone
    Not unlock the SIM card so the GSM services wil not start.
    I'll let you know if there are some improvements and let's hope that Apple will allow us to turn off GSM services as well in the futures iOSes
    Regads,

  • Can I have two apple id's but still use the same itunes

    My mom just got an iPhone. We use the same iTunes but can we both have different Apple ID's and still use the same iTunes??

    Log in and out of the iTunes Store as needed; content purchased from both can exist in the same library and on the same device.
    If you've purchased an application under one ID, you may need to be logged into it to make in-app purchases. If the iTunes library contains protected content from more than five Apple IDs, iTunes may not allow devices to be fully synced.
    (91939)

  • How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
    I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    https://www.google.com/calendar/iphoneselect

  • I lost my iPhone device, how can I get my data back on another one without using an iCloud backup just back up on i Tunes, Please Help.

    I lost my iPhone device, how can I get my data back on another one without using an iCloud backup just back up on i Tunes, Please Help.??

    You can find the backup files and then copy them to a safe place if you are worrying about this.
    iTunes places the backup files in these places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
    Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    To quickly access the AppData folder, click Start. In the search bar, type %appdata%, then press Return.
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    To quickly access the Application Data folder, click Start, then choose Run. In the search bar, type %appdata%, then click OK.

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • I want to put all my music onto an external hard drive.  But I can't get it to put music on my itunes.  The music list is completely empty and so is my IPOD.

    I want to put all my music onto an external hard drive.  But I can't get it to put music on my itunes.  The music list is completely empty and so is my IPOD.  How do I do this?  I have a PC with Windows.

    You say the music is not on the external HD, the music list (iTunes?) is empty, and it is not on the iPOd. Then where is the music you want to move to the external HD?
    You can redownlaod iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How can I get rid of tab groups (not a button, but the feature itself)? Hate it. Thank you.

    I would like to have just tabs without groups, visible all at once, as we had it in previous firefox versions. I don't see any instructions/options. Please help.

    To uninstall Ask Toolbar program from your computer,click the Start button, click on Control Panel,the select Uninstall a program. Search and uninstall Ask Toolbar Updater and Ask Toolbar from your computer.
    Next you want to uninstall Ask from Firefox:
    * At the top of the Firefox window, click the orange Firefox button, then select Add-ons.
    * Select the Extensions tab, then remove Ask Toolbar and any other unknown extensions from Mozilla Firefox.
    * To reset your search engine and homepage to their default, you can use the SearchReset extension.This add-on is very simple: on installation, it backs up and then resets your search preferences and home page to their default values, and then uninstalls itself. This affects the search bar, URL bar searches, and the home page.
    **https://addons.mozilla.org/en-US/firefox/addon/searchreset/
    You can also use [http://www.bleepingcomputer.com/download/adwcleaner/ ADWCleaner] to get rid of Ask's registry keys.
    Use the following scanners to make sure Ask is removed:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]

  • How can I get 300 dpi tifs out of webex stills & then worked on in adobe illustrator?

    How can I get 300 dpi tifs out of webex stills & then worked on in adobe illustrator?
    I have been trying to convert images created in webex and transferred to illustrator into 300 dpi tifs. They download as ucf's when generated on white board. Or I have to upload files from other webex participants coming in at 72 dpi, converting them to something bigger in photoshop to paint in before taking them back into the webex session as a doc that then gets worked on further during the session. Later they go into illustrator for some more work with vectors. That's fine for the web but now a publisher wants them as 300 dpi tifs and I can only get things back & forth as 72 dpi pdf's. If I try to bump them up with a resample, they come out teensy weensy. What am I missing and is there any way to make them look good?

    What I need is to be able to transfer the images between formats without degradation of the resolution and find ways to sharpen what I have even if I can't increase pixels. If the original I'm delivered is a 96 dpi power point slide, for example, that's what I have to work with, I'm using Illustrator to compensate with vectors. But then I still need to get it back to a 300 dpi tiff to meet the specs.

  • I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

    I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

    Repair permissions and restart your computer.
    Make sure you have the updated scanner drivers installed. 
    Install the gimp drivers:  http://gimp-print.sourceforge.net/MacOSX.php 
    http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer 
    http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    What to do when you can't print

Maybe you are looking for