Can't Get "Hand" to move plug-in order

Normally when I want to change the order of plug-in effects, I can use command and click drag. Now I'm just getting a pointing finger and the whole channel strip moves. I can mute with option click, but for some reason, the ability to move the plug up or down in the order is gone. I've looked in the key commands, but I don't see any reference to this action..
Any help is appreciated.
Dan Rad

Thanks... that did it... It was the left click was accidently assigned to "Launch Thermonuclear Weapon".
I put it back to the arrow tool, and now everything is wonderful in the world... except Kiev which was leveled...
Dan Rad

Similar Messages

  • I don't no much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rentented another movie, now I want to get it from pc to iPad....help be much appreciated...

    I don't know much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rented another movie, now I want to get it from pc to iPad....help be much appreciated...

    Did you rent the film directly on the iPhone ? I've never rented films, but from : http://support.apple.com/kb/HT1415 :
    You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to any other device and you must watch it on that device.
    If you've rented a film on your computer's iTunes then you should be able to sync it to your iPad from your computer's iTunes via the Movies tab that shows on the right-hand side of iTunes when you've selected the iPad 'device' on its left-hand side

  • How can I get an itunes movie from macbook to apple tv via airplay, how can I get an itunes movie from macbook to apple tv via airplay

    how can I get an itunes movie from macbook to apple tv via airplay?

    You don't use Airplay.  You set up Home Sharing on both and under the Computers section of AppleTV you'll then find it under Movies (or Rentals if rented), assuming it's in a compatible format.
    AC

  • I can not get the flash player plug in to work with Internet Explorer

    I can not get the flash player plug in to work with Internet Explorer

    Zoltan71 wrote:
    I just bought this computer. My Internet Explorer is version 11.0.1
    I have the box checked to Install new version automatically, but it has not done any upgrading.
    I can't get the computer to update anything as far as I can see.
    The flash plug in does work with the Crome browser but it will not work with Internet explorer.
    I looked in the manage add-ons and it says enabled.
    I also went into the safety tab and deselected
    Active X filtering.
    Restarted and still does not work.
    I need help.....
    Chrome uses a different and separate plug-in.
    There are things about IE you need to know, especially 11. Specifically:
    "User-Agent Strings"
    That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
    Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
    The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
    Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
    They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • My e-mail address has changed and i-tunes still recognizes me by the old one. I can't get authorization to move songs from one computer to the next.

    When I first got started with Mac, I had a different e-mail address. I have a new e-dress and new passwords, but much of what I bought was with that old e-dress. Now, I'm trying to migrate my i-tunes library to a new computer, and I can't get authorized to move or play songs on the new computer.
    Does anyone know what to do? (A once and for all reset of Apple username and password).....
    Thnx

    Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click on any checkbox will select or unselect them all - and you should then have continuous playback.
    Hope this helps.

  • How can i get my rented movie itunes download is informing waiting

    how can i get my rented movie itunes download is informing waiting

    hi
    i used my ipad for downloding. when i connect to my imac , itunes there are no available downlods, they charged me already

  • Mouse pointer is frozen in left corner of monitor.  restarted, can't get it to move

    My Power Mac G-4's mouse indicator/pointer is frozen in  the upper left corner of the monitor.  I can't get it to move.  I have restarted, powered down, checked all connections to no avail.    Anybody have any ideas?  Thanks.

    I just had this problem. It turned out to be a bad kernel extension. Here's how I solved it:
    While booting, hold <Shift> to boot into "Safe Boot". I was able to control the mouse from there.
    In Finder, navigate to /System/Library/Extensions.
    Choose the "list" view so you can see the details of each file.
    Right-click on one of the column headers and make sure that "Date Created" is checked.
    Sort by "Date Created".
    Most of the extensions should now be clustered into groups which all have the same date (when the MacOS update providing those extensions was built). What you want to look for are some extensions which are "oddballs", ones which don't share a date in common with any other extensions. To verify that it didn't come from Apple, you can use Get Info to see if the copyright is from Apple or if it is from another company or missing, entirely.
    I found three oddballs on my computer. What I did was empty my trash, and then I moved those three to the trash (so that I could restore them, if I wanted), and then I rebooted out of Safe Boot.
    After the reboot, everything was fine. Hope this helps someone.
    Incidentally, the three extensions were named JMicronATA.kext, GenericUSBXHCI.kext, and AppleBMC.kext.

  • I can't get a purchased movie to play, even though it seems to have downloaded properly

    I can't get a purchased movie to play, even though it seems to have downloaded properly. Any help?

    Hello, Gemma. 
    Thank you for visiting Apple Support Communities. 
    I would recommend trying the steps in the articles below.  If none of the steps work please reply back with any errors received and which computer operating system you are using. 
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    iTunes for Windows XP: Troubleshooting video playback
    http://support.apple.com/kb/TS1386
    Cheers,
    Jason H. 

  • Can i get my rented movies off my ipad and put them on my PC, as i do not have posession of my ipad and i wont for awhile, also can i change the password remotely for my ipad to avoid intrusions?

    can i get my rented movies off my ipad and onto my PC without my ipad in my possession? also can i change my password to access my ipad remotely to stop the intrusions?

    Where did the movies come from?
    For what you said you should be easily be able to do what you want except for:
    "remove them from the ipad but still have access to them for viewing on the road or at hotel"
    Home sharing only works wehn the devices are connected to the same network
    Understanding Home Sharing
    If they are iTunes purchases, you should be able to redownload most iTunes purchases on the road if you have an internet connection by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • When I use a tool on an enlarged image the image freezes and I can't get it to move unless I change tools. I tried resetting tools and uninstalling and reloading CC. What should I do?

    When I use a tool on an enlarged image the image freezes and I can't get it to move unless I change tools. I tried resetting tools and uninstalling and reloading CC. What should I do?  Once any tool is used I can't change its size or move the image.

    Howdy,
    Sorry for the lack of info. It is Adobe Photoshop CC, I have been using
    CS5 and am trying the trial version of CC to see if it worth changing
    to. Any tool works once but freezes the tool sizing and image movement.
    I am also using the Beta version of Mac Yosemite. But the CS5 version is
    working fine.
    Hasta,
    Bob McCaw

  • How can I get an album to play in order on Itunes?  The songs keep skipping all around to other albums that I did not want to listen to at that time?

    How can I get an album to play in order on Itunes?  The songs keep skipping all around to other albums that I did not want to listen to at that time?

    It sounds like you might have the shuffle button at the bottom left of the iTunes (the button with the squiggly lines).
    If that's not the case, then maybe you just need to sort your library by album by clicking the album tab at the top.
    Is your music in a playlist, or are you trying to play it from the entire library?

  • I lost my istore acc and someone use my acc buy item in game. Can I get my my money back ?  Order ID: MGX5VGD5SM

    I lost my istore acc and someone use my acc buy item in game. Can I get my my money back ?  Order ID: MGX5VGD5SM

    http://www.apple.com/support/itunes/contact/

  • How can I get an anamorph movie to widescreen in IDVD

    Hi, I NEED URGENT HELP!
    A friend of mine and I cut and created a movie on his PC with Premiere Pro 2.0. Now I need to create a high quality dvd from it but I can't get the anamorph data to play in widescreen on my IMac. neither in I Movie nor in IDVD. I tried and burned DVDs in both formats 4:3 and 16:9 but both times the film didn't convert to widescreen and on top the movies looked bad- really bad quality, even though the orignal data my friend gave me, is very high quality film resolution.
    What do I need to do to convert the xxx.mov anamorph (16:9) into a widescreen IDVD?
    My friend says the original material is: Mini DV, PAL 720x576 Pixel, anamorph (16:9)
    Or in what form/size do I need the movies/data from him to make sure I can burn a widescreen dvd with it?
    Please help!

    I am not sure about SWF support in Acrobat 8.x, however, if it is supported, you will have to add it to the PDF after the PDF has been created.  You can leave the space for it in your FrameMaker document and add it via the Mulimedia Tool.
    I do know that SWF is fully supported in Acrobat 9.x, but in this case you will also have to add the SWF to the PDF after converting the FrameMaker document.  To do this, marquee and area on the PDF using the Flash Tool; Tools > Multimedia > Flash Tool.  You can also simply double click on the PDF with the Flash Tool.  Support for SWF, and several other multimedia file types is much stronger in Acrobat 9.

  • How can I get back my movie logo?

    I have downloaded a film from iTunes from my iPad. When downloaded, at first I could see this downloaded film including the movie cover on the app called 'Video's'.
    After I streamed this film on my tv via the Apple TV, the movie cover logo disappeared and in place of the original movie cover there is just a drawing of a TV.
    How can I get back the original movie cover logo on my iPad ? Does anyone know this?

    I already did the backup and the apps are now in a folder on my pc and appears when I connect my iPhone to the pc on iTunes). I'm happy it can happen... when the new iPhone will arrive I will try soon! Thank you!!!!!

  • Can't get iTunes to move from one song to the next

    I'm using iTunes 7.3.1 on an iMac with OS X 10.4.10. Everything was working fine, but now I can't get the playlists to move automatically from one song to the next. All the songs play if I double click on them individually, but when a song is finished playing, iTunes does not move automatically to the next song. I have to then double click on the next song I want to play. Furthermore, neither the "next," nor the "previous" track functions work. I have tried fiddling with the control settings (Repeat Off, Repeat All, Repeat One), but nothing I have tried makes a difference. Bottom line: If I want to sit at my computer and hear a playlist on iTunes, I have to manually click on each song I want to hear. Not too convenient when I want to listen while walking on my treadmill! Anyone suggestions would be appreciated.
    iMac   Mac OS X (10.4.10)  

    Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click on any checkbox will select or unselect them all - and you should then have continuous playback.
    Hope this helps.

Maybe you are looking for

  • Error in ESS web dynpro

    hii All, I have depolyed the packages. While runing them , after astablishment of Jco connection it is giving error that Country/Structure not matching with Application country.. So what should be done to resolve it. thanks

  • Can't delete files in open office org writer

    {color:#333399}*Hello!* I have open office org 2.4 with OS winexp pro IE7. I was backing up files from my documents in org writer * onto a cd, but found that the files were also _going to my* docs as a copy. When I right clicked on the copied files i

  • Ajax event in ABAP UI Programming

    Hi, I did a chat application with Ajax and BSP. Now I want to convert it into GUI side.Can I use Ajax in GUI side too? Means, I am defining Html Controller showing chat box there, now it has to be updated using Ajax event... Can we use Ajax in GUI si

  • Hi there, i have Mac OS X 10.5.8 with Safari browser 5.0.6, can my Safari be upgraded gratis or i need to go to App Store? thanks

    Hi there, I have Mac OS X 10.5.8 with Safari Browser 5.0.6, can my Safari be upgraded gratis or do I need to go to App Store? Thanks.

  • Passing variables from JSP to workflow

    I want to pass some variables from my JSP forms to a workflow. The workflow is triggered when I call processLaunch.jsp with the name of the workflow. I couldn't figure out a way to have the input fields in my JSP form passed to the workflow. If anyon