Can't get headers and footers to work - after I enter something (page

I can't get headers and footers to work - after I enter something (page #, etc) it will show up on the first page but not subsequent pages - what am I doing wrong?!

Inspector > Layout > Section > Use previous headers and footers
Peter

Similar Messages

In Pages, How can I get headers and footers to show up on more than the first page of each section?

In Mountain Lion, I considered myself a fairly expert user of Pages. Since "upgrading" to Mavericks, I can't get even basic things to work anymore. My current problem is that the headers and footers are only showing up on the first page of each section. A related annoyance is that if I copy the information in a header or footer, all the associated formatting disappears when I paste it. But the first problem is the one that matters — headers and footers that only show up on one page sort of negate the whole point of headers and footers.

If you click the link I posted previously, it takes you right to the Pages community.
Here > Pages: iWork: Apple Support Communities
Then click New.

How do I get headers and footers to print?

A few months ago, I upgraded from OSX Lion to OSX Mavericks.
I just converted a Numbers sheet to the new version of Numbers in Mavericks.
When I prepare to print the sheet, I can see a header (containing date and title) and a footer (containing page number and count) on every page. To be clear, these are repeating lines at the top and bottom of each page - they are not rows within the table.
When I print the sheet, none of these lines appear. What do I have to do to get them to print? I solved this problem for other sheets (several months ago) by calling Apple Care. Now, my Apple Cae has expired, Help is useless and I forget what I did before.
Can someone tell me what the magic setting is wuthn Numbers?
Thanks

Hey theoqaat,
Thanks for the question. After reviewing your post, it sounds like the headers and footers are not printing. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Numbers for Mac: Using headers and footers for printing
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT204053 i have put in my apple id and password but still can not get imessage and facetime to work

I have put in my apple id and password but still can not get imessage or facetime to work please help...thanks

Please try to sign in at https://appleid.apple.com
Check if your new username/email address is verfied
If this works, delete your account on your iPhone (Settings > iCloud)
Sign back in

[SOLVED] Can't get ccache and colorgcc to work together

Hi all,
Has anyone figured out how to get ccache and colorgcc to work at the same time? I can only get one or the other, but not both.
If I put them both in the path, with colorgcc first, then "g++" invokes colorgcc, which then calls /usr/bin/g++, skipping ccache.
If I put ccache first in the path instead, then running "g++" invokes ccache, which then calls /usr/bin/g++, skipping colorgcc for some reason.
Putting colorgcc back to first in the path, then editing /etc/colorgcc/colorgccrc means I can set the compiler paths to point to ccache. However then running "g++" invokes colorgcc, which calls ccache, but then ccache seems to call colorgcc again, which calls ccache, which calls colorgcc, etc, etc.
Perhaps I'm missing something, but I can't see how you tell ccache where the compiler binaries are located, as this seems to be the problem - ccache autodetects them, and always seems to pick the ones I don't want!
Any suggestions?
Last edited by Malvineous (2011-05-03 01:29:48)

Ha, ok, as usual as soon as I post in a forum I stumble across the answer. Turns out there's a CCACHE_PATH environment variable you can use to tell ccache where to look for the real compilers. It doesn't seem to work setting this to point to colorgcc, but putting only colorgcc in the path, editing /etc/colorgcc/colorgcc to point to ccache, then setting CCACHE_PATH=/usr/bin seems to do the trick...
But if there's a better way please let me know!

I can't get FaceTime and iMessage to work on iPhone 5 operating on 6.0.2, please help

I can't get FaceTime or iMessage to work, i get a message displaying waiting for activation. Also when I make a call the FaceTime icon just says activating

1. Make sure software is up to date (important)
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo

CAN'T GET "REDPLUM COUPON PRINTER" TO WORK AFTER UPDATING TO JAVA 7 UPDATE 51

RECENTLY UPDATED TO JAVA 7 UPDATE 51, CAN'T GET "REDPLUM COUPON PRINTER" TO WORK. VALASSIS COMMUNICATIONS, INC. IF YOU CLICK RUN ON THE PROGRAM, DOESN'T DO ANYTHING. WORKED FINE BEFORE UPDATE. DOESN'T WORK WITH INTERNET EXPLORER EITHER. I USE NORTON ANTIVIRUS. DOWNLOADED JAVA MORE THAN ONCE, SAME PROBLEM. EVEN DOWNLOADED WITH ANTIVIRUS OFF, SAME RESULTS. PLEASE HELP.

The CAPS LOCK key also seems to have gotten stuck on.*
Update 51 ratcheted up the security on Java applets, so that unsigned applets that used to generate a warning are now completely blocked. Please see the following documentation from Oracle on your options:
* [http://www.java.com/en/download/help/appsecuritydialogs.xml What should I do when I see a security prompt from Java?]
* [http://www.java.com/en/download/faq/exception_sitelist.xml How can I configure the Exception Site List?]
''* Just a joke-y way of noting that on the web, writing in all caps is considered shouting. Please don't shout at the volunteers.''

Can I omit headers and footers in conversion?

Hi everyone,
I am having problems with footers and headers each time I convert from pdf to Word using Adobe ExportPDF. It is an excellent program, but I have a problem.
I follow the instructions and the pdf converts to Word fine, but the converted text has a footer and header at each page break.
I tried converting after making the pdf continuous, i.e. no page breaks, but the footer and header still turns up where a page would be!
I have great difficulty dealing with the text in the footer and header and have to type in the last line on one page and the first line on the next page in order to complete the full text conversion. Can I not convert from pdf to Word without footers and headers?
If I can't get rid of the footer and header, then how to I deal with the text in the footer and header without wasting time and effort typing it in or dragging it from the footer and then having to get rid of the empty footer (also, same with header, of course)?
I thought I would just add this: When I create a Word document from scratch, the last line on the page and the first line on the next page are not in footers and headers. So why are they contained in footers and headers after conversion using Adobe ExportPDF?
Many thanks folks,
Gareth

Hi Test Sceen Name, I wasn't quite sure how to address you by name, but you will correct me if required, I'm sure.
I can't help but notice that you have 4,392 posts to your credit, so you might say I am a little intimidated here, but I must say what I believe, though your answers will undoubtedly influence me, it's true.
Now, what is happening to me is that "every" document the problem of which I complain occurs at "every" page break.
If the software is "guessing" then it is guessing the same thing all the time. I am talking many hundreds of pages here and that is a lot of extra work for me to correct.
As for assuming this is not happening to others because of lack of response, surely if others read about my problem and have the "same" experience as me you would think that one of them at least would say something.
Am I the only one that this is happening to? If it is commonplace among members, then do they not have some kind of obligation to help a fellow member, if only to say, "Give it up, I have this too and there is no solution other than manual correction."? Would it not be somewhat perverse, to some degree anyway, for other members to experience the same problem as me and not pass on how they dealt with it?
Anyway, in light of all other non developments, I must bow to your truly considerable experience and put it down to a flaw in the software that the software then tries to correct by guessing.
I have been using MS Word since version 5.1a, a very long time ago. Content is not supposed to end up in footers or headers. Data, like date, page number and other repetitive text, yes, but content never. So it would seem that Adobe ExportPDF has a serious flaw, though in smaller documents it is one that can be surmounted reasonably. But for the long document, correcting it is a lot of work, too much work.
Well, until Adobe addresses the problem and fixes it I shall have to carry on either eradicating the footers and headers and replace the missing content, the last line on the page and the first line on the next page, with text from the PDF and then adjusting the font, spacing etc, or, copy what is in the footer and header and paste it where it belongs then getting rid of the now empty footers and headers.
Copying text from the PDF is less messyand quicker. So this I must do at every page break on every document that I submit to Adobe ExportPDF whether the document starts out with one long continuous page or not and even though resort to footers and headers has not been made. I shall hope that soon the software stops guessing.
Many thanks indeed for your kind consideration of my problem. I respect your considerable experience with Adobe products and for now, anyway, I shall take your advice as the last word as no other responses seem to be forthcoming. No doubt, because they agree with you.
I shall consider this string closed now from my point of view and have maked your response as helpful. I hope that is okay.
Thank again and all the best,
Gareth

HT3310 Can't get remote and mic to work at all with my iPad. Anyone else having this problem?

Can't get EarPods remote and mic to work with my iPad 3. Anyone else having this problem and, if so, how did they fix it?

I am trying to get my USB headphone and mic to work with Skype but I'm not having any success. I have tried several different headphones with the same result.
What are the system requirements of your headphones & mics? It's possible they are not compatible w/Macs and/or your current OS system.

How can I get Copy and Paste to work?

It doesn't work with the key pad, ctrl v, or in edit. Copy and paste always worked for me and just quit working a few days ago. I have not done anything different with the computer- no new programs, setting changes, etc. I just can't paste anymore. Why might this have happened and what can I do? I've looked through the forums and haven't found any real solutions. It's really frustrating to get anything done without that function!

Mollexter,
did you mean Command-V rather than Control-V? (Control-V is used for pasting in Windows.)
Have you been able to confirm that it is pasting that is not working, rather than copying not working? (If copy doesn’t work, then there would be nothing to paste.) Try cutting with Command-X, then pasting; does the pasting work then?
In the Keyboard pane of System Preferences, have a look through the Shortcuts section. Has any other shortcut been set to use Command-V (or Command-C, if it’s actually a problem with copying)?

Can't get Headphone and Mic to work with Skype

Hello, I have a 3 year old Macbook Pro and I am running OS 10.8.3. I am trying to get my USB headphone and mic to work with Skype but I'm not having any success. I have tried several different headphones with the same result. I finally phoned Skype support and they told me that there are some registry settings that are corrupted and that they could install the proper ones on my MBP for $149.99. I told them I did not want to spend that kind of money but I am curious if anybody else is having that issue and if anybody has a solution. Is it true that my registry values could be corrupted causing this issue. If I start up Parallels and open Skype in Windows 7 I have no issues whatsoever using the headphone. It works every time but I cannot get it to work on the Mac platform. I would appreciate any advice anybody might have. Many thanks in advance.
Dan

I am trying to get my USB headphone and mic to work with Skype but I'm not having any success. I have tried several different headphones with the same result.
What are the system requirements of your headphones & mics? It's possible they are not compatible w/Macs and/or your current OS system.

How can I get copy and paste to work in Lion?

Never had any problem using copy and paste function on my old iMac (Snow Leopard OS X). Just bought a new iMac with Lion. Now, the copy and paste function won't work.
Tried to copy and paste a web link into a Mail message unsuccessfully (tried select text, command C, then command V- no luck. Then tried select text, menu bar Edit- Copy, then Edit-Paste- No luck. Last, tried right-click menu,Copy, then right-click Paste- no luck). Also, selected some text in an email message and tried to copy and paste it elsewhere in the same email message- no luck. Opened TextEdit and used all the above techniques and could not copy and paste into TextEdit. Also could not use copy and paste to work in Safari when I tried it when working in a gmail message.
This is extremely frustrating. I searched but could not find a fix that addressed this precise issue.
Please help. When suggesting fixes, please recognize that I'm an intermediate user- not a beginner, but also not an advanced techie.
Thanks much.

Something seems to be interfering with those functions.
Two troubleshooting steps to try.
First, boot into Safe Mode and see if it still occurs. If it doesn't, then there is some third-party program interfering.
To boot into Safe Mode, hold down the shift key on restart when you hear the tone. Hold until the gray screen. It does take longer to boot as it runs some checks. It will also boot to the login screen regardless of your login settings.
Second, try a new user account. If it works there, it is isolated to your particular account and not the whole system.

Can't get lift and stamp tool working

I simply can't figure out how to get the lift & stamp tool going. I keep reading and re-reading the manual. I have a loop on one track with some effects on it, and want to apply the same effects (with the same levels) to a loop on a different track.
I click the clip whose effects I want to lift. The sound Palette opens up, but no properties are listed in the right of the Sound Palette box.
Any tips on what I could be doing wrong?

Update: I figured out that it only works on processed effects and not real-time effects. I see then that you're supposed to render the real-time effects as actions, but when I try to "Render to Action" the real-time effects, this option is grayed-out in the Process menu bar, so I am still unable to copy effects from the one track to another.

How can I trim headers and footers off content to be scraped/rewritten in a channel?

I would like to obtain the raw html code after the rewriting functionality has already taken place to manipulate the HTML code. Basically removing the fluff at the top and bottom. In this way, I can include a subset of the HTML page, rewritten in a channel. Is there an API call to the gateway to request a URL and get the returned rewritten HTML back? If not, there should be.

Currently there are no api's available for the rewriter or the gateway. Can you explain a little more in detail , what you are trying to do, so I can tell you if there are any possible ways to do that with portal.

How can I get drag and drop to work again in iphoto11?

I have created a photo book in iphoto 11 (version 9.3.2) on my imac running os 10.7.5. The drag and drop feature suddenly quit working. I cannot drag/drop photos from an event into the photo book OR within the photo book.
I've restarted the computer to no avail. I've also quit and restarted iphoto.
When I run Console, I see the following errors: iphoto: coredragcrete error -4960 and error in coredragdispose -1850
What should I do to get my drag and drop working again?

Repair permissions with Disk Utility.

Can't get headers and footers to work - after I enter something (page

Similar Messages

Maybe you are looking for