Can't get icloud to restore after crash from ios 8.1 update, says server not avaible, any suggestions?

Had ipad2 crash during ios 8.1 update, tried different things to make it work, ended up booting as new.  Tried on a couple different days to restore from clould and it says server  not avaible, would love to get the info back, any suggestions?

Can someone tell me the implications of using the command RESET DATABASE on my system days after I did the open reset logs? I opened the database with the ALTER DATABASE OPEN RESETLOGS in SQL not RMAN and I see the below note.....
Re: Can't get dataguard to recover after SAN crash.
To reset the incarnation of the target database in the RMAN repository, which means to do either of the following actions:
•Inform RMAN that the SQL statement ALTER DATABASE OPEN RESETLOGS has been executed and that a new incarnation of the target database has been created. Note that if you run the RMAN command ALTER DATABASE OPEN RESETLOGS (not the SQL statement with the same keywords), then RMAN resets the target database automatically so that you do not have to run RESET DATABASE. By resetting the database, RMAN considers the new incarnation as the current incarnation of the database.

Similar Messages

  • On My Wife's iPad 4, when she enters a note it is automatically copied to her Gmail email account.  I can't get the settings right to do the same thing on my new iPad Air.  Any suggestions?

    On My Wife's iPad 4, when she enters a note it is automatically copied to her Gmail email account.  I can't get the settings right to do the same thing on my new iPad Air. 
    Any suggestions?

    Go into Settings>Mail,Contacts, Calenders then you need to click on your email and make sure you have the thing next to the word notes switch on.
    Then they should sync over the iCloud
    Hope this helps!

  • Can you get iCloud with out up grading to iOS

    can you get icloud with out up grading to ios

    iCloud for IOS devices is only supported on IOS 5.0 and above.

  • How can I get Lion re installed after crash and no recovery disk?

    I bought Lion some time ago I did not do a recovery disk and now I had a huge crash. I started over with Snow Leopard cause that's all I had. How can I get Lion re installed?

    Make sure you're up to 10.6.8 through Software Updates, and then re-download Lion from the App Store.
    Incidentally, many Macs (from 2010 models onwards) have the ability to run Internet Recovery, even if your original hard drive crashed, which will allow you to re-download and install Lion directly from the internet.
    But the best way is always to have a local backup of your system drive.
    Matt

  • Can't get yosemite to working after waking from sleep mode

    I just installed Yosemite to my Mac Mini.  When the computer goers to sleep for more then 30 seconds I can wake the computer but then after i see the desktop I can't do anything on the computer every click i make does not respond and I have to force the computer to shut down and I have to reboot every time my computer goes to sleep.

    I have the exact same issue for the first time after installing Yosemite.  On resume from sleep, I can see the desktop, and can move the cursor with the mouse, but clicking on icons, etc. does nothing, and the keyboard does nothing. A cold boot works fine. This is a Mac Mini bought in the Summer of 2014. I run no unusual software. I have eliminated all log in items in Preferences/Accounts, reset the NPRAM, have no peripherals (other than standard Apple mini mouse and wireless keyboard), and have shutdown and unplugged to reset.  It makes no difference whether a password is required or not - once it goes to sleep, this is the result, and only a forced shut-down by holding the power button and a cold boot give me control back.  This problem does not appear if it merely goes into screensaver mode - which I invoke with a hot corner.

  • My iPod Touch won't restore on iTunes! It's stuck on recovery mode and I can't get it to restore after I updated the software! Help?

    Okay, so I got an iPod touch, 4th gen, 32gb, brand new and running perfectly fine two years ago. Used it for about six months, lost it, and finally found it again a month ago tucked away in my recliner. It was as dead as a doornail, but I had it charged up and ready to go in a few hours.
    So I wanted to get a special app for my iHome, as well as spend all of my accumulated iTunes cards that were previously useless due to the fact that I had lost my iPod for a year and a half. The app store said I had to update to the current software to download anything new, so I did just that about half an hour ago, updating to the latest version of iTunes and downloading the new software for my iPod like I was supposed to.
    Only when I applied it to my iPod, it went into Recovery Mode as expected, but I can't restore it! I've made sure there's no extra USB attachments in it, my firewalls are currently down to get around this stupid thing (just turned them back on because it wasn't working), and feeling like I just let all this money slip down the drain.
    If you have any relevant advice, please help! I'm running on Windows 7 with the current version of iTunes (64 bit). Help!

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Can´t get icloud to restore on my iphone 4s because it was last saved with the new 7.0.6

    trying to sync with from my old iphone 4s to the new one. but i can´t use the iclound that was saved ater i updated to the new software!! it only wants to sync with my ipad that´s from 2013- please help

    Read this
    Restore
    http://support.apple.com/kb/TS4036

  • Can't get ET to work after building from AUR

    I have downloaded Enemy Territory tar from AUR and am trying to build it, here is what I am getting:
    bobby@dabox:~/installs/enemy-territory$ ls
    enemy-territory.desktop et-ded et-pbupdate.sh PKGBUILD
    enemy-territory.install etded.sh et.sh
    bobby@dabox:~/installs/enemy-territory$ makepkg
    ==> Entering fakeroot environment
    ==> Making package: enemy-territory 2.60b-8 (Tue Jan 8 14:44:27 EST 2008)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Downloading et-linux-2.60.x86.run
    --14:44:28-- http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60.x86.run
    => `et-linux-2.60.x86.run'
    Resolving ftp.games.skynet.be... 195.238.1.6
    Connecting to ftp.games.skynet.be|195.238.1.6|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 270,965,248 (258M) [text/plain]
    89% [============================================> ] 241,461,216 458.72K/s ETA 01:03^100%[==================================================>] 270,965,248 467.87K/s ETA 00:00
    14:54:12 (453.47 KB/s) - `et-linux-2.60.x86.run' saved [270965248/270965248]
    -> Downloading ET-2.60b.zip
    --14:54:15-- http://ftp.gwdg.de/pub/misc/ftp.idsoftware.com/idstuff/et/ET-2.60b.zip
    => `ET-2.60b.zip'
    Resolving ftp.gwdg.de... 134.76.12.3
    Connecting to ftp.gwdg.de|134.76.12.3|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 4,143,401 (4.0M) [application/zip]
    100%[==================================================>] 4,143,401 326.94K/s ETA 00:00
    14:54:36 (201.11 KB/s) - `ET-2.60b.zip' saved [4143401/4143401]
    -> Found enemy-territory.desktop in build dir
    -> Found et-ded in build dir
    -> Found et-pbupdate.sh in build dir
    -> Found et.sh in build dir
    -> Found etded.sh in build dir
    ==> Validating source files with md5sums
    et-linux-2.60.x86.run ... Passed
    ET-2.60b.zip ... Passed
    enemy-territory.desktop ... Passed
    et-ded ... Passed
    et-pbupdate.sh ... Passed
    et.sh ... Passed
    etded.sh ... Passed
    ==> Extracting Sources...
    ==> Starting build()...
    Creating directory enemy-territory
    Verifying archive integrity... All good.
    Uncompressing Enemy Territory 2.60 Full Install..............................................................................................................................................................................................................................................................................................................................
    [b]cp: cannot stat `Enemy Territory 2.60b/linux/et.x86': No such file or directory
    cp: cannot stat `Enemy Territory 2.60b/linux/etded.x86': No such file or directory[/b]
    ==> Removing info/doc files...
    ==> Compressing man pages...
    ==> Stripping debugging symbols from libraries...
    ==> Stripping symbols from binaries...
    ==> Generating .FILELIST file...
    ==> Generating .PKGINFO file...
    ==> Copying install script...
    ==> Compressing package...
    ==> Finished making: enemy-territory (Tue Ja
    I have bolded those 2 lines as when I try to run enemy-territory after finishing, I keep getting this:
    bobby@dabox:~$ enemy-territory
    /usr/bin/enemy-territory: line 6: /opt/enemy-territory/et.x86: No such file or directory
    /usr/bin/enemy-territory: line 6: exec: /opt/enemy-territory/et.x86: cannot execute: No such file or directory
    bobby@dabox:~$

    colbert wrote:So this cannot work since it is trying to use a .zip? But others have gotten this to work, I don't understand?
    It was caused by the upgrade of the file package.

  • Can't get GDM to work after switch from KDE/KDM to Gnome/GDM

    When I start up it boots into GDM but goes to failsafe with a single terminal and that is it.  I would then go to init 3 and startx from there.  Goes to Gnome.  I open a terminal and use gdmsetup and get that another login manager is starting a boot up.  I changed .xinitrc and inittab to point to gnome and gdm but nothing.  What am I missing.  KDE is uninstalled, is it possible the kdm didn't uninstall.
    help please

    add @gdm to your daemons list

  • Can't get my old mails after Migration from iMac G4 to new iMac

    Hi,
    I bought this weekend my new iMac and transferred all data of the old iMac to my new one. Everything works fine except Mail: it is not possible to connect the Mailserver, the local stored e-mails are not visible. Mail knows the name of my mailfolders and complete setting (these settings work at the old iMac) but the folders are empty and it is not possible to quit Mail (only cmdaltesc works).
    Does anybody knows this problem (or the solution)?
    Thanks for response
    Lubitsch

    Assuming that both are running the same version of OS X, what you could do is copy the entire contents of the folder <home>/Library/Mail across from your old iMac to your new iMac and also copy the file com.apple.Mail.plist from the folder <home>/Library/Preferences on your old iMac to the same folder on your new iMac.
    When you then start Mail it should operate as expected.
    Chris

  • Can i get my photos back after losing them on the ios7 update

    i am gutted i had over 1200 pics and vids on this and i was promised i wouldnt lose them and i did

    - Maybe via How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     

  • HT1386 How can I get local content only to sync FROM my library to my Iphone and not the other way around?

    Ever since ICloud, my local Itunes library has been poluted with old music that I got rid of a long time ago.
    I purchased an album from the Itunes Store App on my Iphone, listened to all the songs and decided I don't like all of them but some of them.  So I went on my laptop and the album I purchased loaded into Itunes.  I manually deleted the content I didn't want from my Itunes library.  Once my library was set the way I wanted, I wanted my Itunes library synced into my Iphone, but instead, my Iphone's content gets re-synced back into my Itunes library and the content I once deleted tries to re-download.
    It's agrivating that what was once an easy automated process is now a slow agonzing manual process.  I'm considering getting rid of my phone if I can't find a remedy for this, which is the only apple product I now own.
    I don't want ICloud to auto download content
    I don't mind streaming the old music on my Iphone but I DO NOT want it downloaded into my phone or into my library.  I like to keep ICloud and my Itunes Library seperate.
    I just want to click "Sync" on Itunes, and my phone syncs EXACTLY how my Itunes library is.
    Please help...

    Backup, then restore the iPhone without syncing. Only the content currently in your library can be restored back to it.
    Turn off all options in iTunes and on the device for automatic downloading of purchases.
    In principle purchases made on the device are copied into the iTunes library when syncing. This ensures that you have the media ready to place back on it or a replacement should the device be lost, stolen, damaged, or need restoring, When you want to remove content either delete it manually from both the device & the library at the same time, or uncheck it within the library so that it is removed from the device during sync, then remove from the library later.
    tt2

  • How can I get Apple Remote Desktop to disappear from my App Store updates list?

    My Apple Remote Desktop software shows up in my App Store updates list.  But I have already updated it to version 3.6.1 and it shows as "Installed".  It is greyed out and will not go away.  Any ideas on how to make it disappear is most appreciated. 

    All the suggestions I have read have not worked for me.
    But you can try:
    Running Software Update from the Apple Menu
    Logging in to the Mac App Store with the account that purchased ARD
    Deleting various Apple Store .plist files
    NB I haven't tried removind ARD and reinstalling.

  • I'm connected to Wifi on my MacBook and iPad yet I can't get  email or Internet access. My iPhone is fine, but that uses 3G. Any suggestions?

    I'm connected to wifi but can't connect to Internet or email on MacBook or iPad

    Being connected is to your wireless router. What's the modem doing?

  • How can i get back my data after i restored my iphone and accidentally created a new iphone ac.

    how can i get back my data after i restored my iphone and accidentally created a new iphone ac.
    it did a back up when i started my restored iphone and i cant retrieve my previous backup while i didnt back up on icloud....
    the new ac is actually the same apple id as the one i used. I lost all my contact, photos and data of whatsapp...
    what can i do...help!

    I don't know if this is a similar problem but I wrote 2 notes yesterday on my iphone. I opened my mail to print them and they appeared as notes but wouldn't load. Then I looked at them on my iphone and I could see the notes but they quickly updated to blank with a time of the last edit the same time I tried opening them on my computer.
    Yesterday I updated to 4.3.4  I don't know if somehow that affected them. Are they stored somewhere else. Can I get them back?

Maybe you are looking for