Can´t get icloud to restore on my iphone 4s because it was last saved with the new 7.0.6

trying to sync with from my old iphone 4s to the new one. but i can´t use the iclound that was saved ater i updated to the new software!! it only wants to sync with my ipad that´s from 2013- please help

Read this
Restore
http://support.apple.com/kb/TS4036

Similar Messages

  • Can't get iCloud to back up on IPhone 5. Have 7.1 GB available. Backup keeps failing while I am plugged in and connected to wifi

    Can't get iCloud to back up on IPhone 5. Have 7.1 GB available. Backup keeps failing while I am plugged in and connected to wifi. It will show backing up now and estimated time 20 plus hours and always ends up failing after a couple hours

    You need at least 50 MB of free space in order to back up to iCloud.  Rather than backing up, have you tried importing the photos to your computer and deleting them from the camera roll as explained here: http://support.apple.com/kb/HT4083?

  • Can I get icloud on my ipod touch 4.3.5 and sync my music to my new iphone 4s?

    can I get icloud on my ipod touch 4.3.5 and sync my music to my new iphone 4s

    If you a 3G or 4G iPod then you can install iOS 5. iOS 5 is required for the iPod to use iCloud.

  • How can you get OS Lion back if you already downloaded Mavericks?  I CANNOT live with the battery life of 2 hours!!  HELP

    How can you get OS Lion back if you already downloaded Mavericks?  I CANNOT live with the battery life of 2 hours!!  HELP

    Kappy wrote:
    Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
    When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
    Boot into Recovery (hold ⌘R on boot)
    Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
    Quit Disk Utility
    Then Select: Restore from a Time Machine Backup.

  • When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application." Using OS X 10.6.8

    When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X."
    I've run the software update several times. Pages is located in my iWork '09 folder in Applications. Using OS X 10.6.8

    Delete and reinstall it.
    (104030)

  • Can't get icloud to restore after crash from ios 8.1 update, says server not avaible, any suggestions?

    Had ipad2 crash during ios 8.1 update, tried different things to make it work, ended up booting as new.  Tried on a couple different days to restore from clould and it says server  not avaible, would love to get the info back, any suggestions?

    Can someone tell me the implications of using the command RESET DATABASE on my system days after I did the open reset logs? I opened the database with the ALTER DATABASE OPEN RESETLOGS in SQL not RMAN and I see the below note.....
    Re: Can't get dataguard to recover after SAN crash.
    To reset the incarnation of the target database in the RMAN repository, which means to do either of the following actions:
    •Inform RMAN that the SQL statement ALTER DATABASE OPEN RESETLOGS has been executed and that a new incarnation of the target database has been created. Note that if you run the RMAN command ALTER DATABASE OPEN RESETLOGS (not the SQL statement with the same keywords), then RMAN resets the target database automatically so that you do not have to run RESET DATABASE. By resetting the database, RMAN considers the new incarnation as the current incarnation of the database.

  • I recently did a backup and restore on my Iphone 4 because I was switching carriers. When i switched carriers i went back to I tunes to restore all that iI backed up I can't get any of my pics back contacts or anything. is there a way to recover the data?

    I recently did a backup and restore on my Iphone4 because iI was going to switch carriers. When I switched carriers I went back to I tunes to restore my backup and nothing was there .Some how I lost all of my data, is there a way I can retrive my data or not? I had all of my pics and contacts on the backup. please help..  

    When you say nothing was there, do you mean the backup wasn't there?

  • I can't get iCloud to verify on IOS5 iPhone 4

    I have converted my MobileMe account to iCloud. My email works perfectly on my iMac, iPhone and iPad.
    Previously I had a family account and my wife had a separate email address which worked on her iPhone. Now this will not work on her phone. Whilst I can log into this account via iCloud on the web (so have the correct password), when I try to add it to her iPhone (which has IOS5)  a pop-up box appears which says," iCloud User name or password is incorrect". It will not allow me to click ok on the screen and I then have to push the home button and force quit settings to try again.
    Both phones were historically sync'ed with the same iMac and iTunes
    Please help!!

    I have exactly the same problem with my iPodTouch 4th gen and my wifes iPhone 3GS. When you login to icloud on the settings page it says the password is incorrect then the device locks up. It's fine on my iPad and both our Mac laptops.
    iCloud fail so far 8(...

  • I tried restoring my Ipad 2 and when it was trying to update the new software, this thing pops up saying an error has occured cannot update software. My ipad is still stuck on the apple logo.

    I tried restoring my ipad 2 and when its trying to extract the new software this pop up appears on the screen and says ERROR: cannot update software or something. My ipad still doesnt return to the home screen. It's still stuck on the apple logo. I only had this for a year. Is it broken?

    If your ipad had no problems before, then it is your computer then may fail you. Try to restart computer and ipad.Try to disable antiviruses. If that happens again and you have apple store close by you can set up appointment, or try another computer.

  • HT5654 I had to remove my old version of itunes because I was having problems with the latest update. Now I am tryin to download the lates version and it keeps telling me I am not the administrator.How can I downdoad itunes?

    How can I reinstall itunes without it telling me that I am not the administrator?

    The iTunes app on your device is bundled with iOS.
    The latest version of iTunes for your PC is 10.7:http://www.apple.com/itunes/
    If you have the latest version of iTunes installed on your PC, and are still having trouble with the device, try this:
    1.  Connect your device to your computer.
    2.  Listen for the "new hardware found" beeps.
    3.  If you do not hear the beeps and if iTunes does not automatically start, try a different USB port. 
    4.  If you still do not hear the beeps and iTunes does not run, try a different charging/docking cable.
    5.  If that fails, then try connecting your device to a different computer.
    6.  If this fails, the device is defective.

  • Can't get icloud mail to work today, on and device, is there a problem with server?

    Anyone else with same problem or anyone can tell me how to sort it out please?

    I too am having the same problem. Whats the point of having a server status stating everything is working when clearly it isnt. I'm just in the process of changing all my important mail stuff over to gmail - I just cant be without mail for hours whilst there is no status update.
    I would understand if this were a free service - however its not.
    Does anyone have an ETA on a fix ?
    Thanks

  • I can't get icloud to work between my iphone and ipad

    Anything I put on my calender never syncs to either device.  Same with music, contacts, etc.  Any help?

    they have to be on the same network airplay does not work across the Internet
    the appletv has to be appletv 2g or later

  • I can't get on Mafia Wars it keeps saying Mozillafirefox not responding ever since I downloaded the new 4.0 earlier just keeps saying not responding. Help

    You keep crashing saying not responding when I try to get on Mafia Wars, and my mafia wars toolbar is gone, ever since I downloaded your new firefox today

    Hey Sandy and Skip,
    Thanks for the question. I understand you are experiencing issues with mail on your iPhone. I also understand you have already attempted some great troubleshooting steps. The following resource provides additional information for troubleshooting these symptoms. If you have not already done so, I would recommend the last step; deleting and re-adding the affected account:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Try these basic troubleshooting steps first
    1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage,follow these troubleshooting steps.
              - Try to use an alternate Internet connection if available:
                        1. Try a different Wi-Fi connection
                        2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
                        3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
    2. Log in to your email provider's website to ensure that the account is active and the password is correct.
    3. Restart your iOS device.
    4. Delete the affected email account from your device.
              - Tap Settings > Mail, Contacts, Calendars.
              - Choose the affected email account, then tap Delete Account.
              - Add your account again.
    * If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    Thanks,
    Matt M.

  • How can I get an image to open from Lr 4.4 and edit in CS4 with the Lr edits intact?

    I get a warning message in Lr saying I need to update my camera raw to 7.4 and have done so. No change though.

    That's impossible. CS4 only supports ACR up to 5.6 and LR 4.4 equals ACR 6.7.
    Mylenium

  • My calender was wiped out with the new software how do I restore my calender

    I updated my software and my calender has been wiped clean. How do I restore all the information on my calender.

    Try recovery mode
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Mac keeps freezing at desktop launch

    I have a problem with my Mac mini whereby I am able to startup and launch the desktop on most occasions but if I attempt to do anything such as open a folder the colour wheel just keeps freezing. I am running OS X 10.6.8 and I have started disk utili

  • Change the value of column from select and insert different

    Hi All, I have written a procedure where i am selecting values from some table and inserting in a new table. The code is below If you see the line 54 in code, you will find the combined_bu_code is is coming from one procedure and the value of BU is s

  • Batch Canvas Resize?

    I have a large batch of varying image sizes, such as 1280 x 853, 800 x 600. I want to get them down to 200 x 200. I can do the regular scale to size and get all images to a 200px width. But now the dimensions are all 200 x 133 and 200 x 150. I need t

  • Email not coming to iPhone right away

    I thought I would get notifications of email (using my @me.com account) right away. This does not happen - it seems that if I go into the email section - email then downloads - I do have this account set to push so I am not sure what is wrong. Thanks

  • SJSWS 7 u4 reverse proxy setup with client ip forwarding

    Hi, I am trying to set up a reverse proxy to glassfish enterprise 2.1 so that it will pass on the client ip address. I have added this line to my obj.conf file: ObjectType fn="forward-ip" hdr="Client-ip" Entire obj.conf below: <Object name="default">