Can't get iMessage, totally deleted everything on iPad mini and then started from scratch but still can't get iMessage

On iPad mini, and year ago my iMessage stopped working ! Took it to the store n they reset everything on it! Still couldn't get iMessage to work.
Just decided to leave it because thought I can deal with email n Skype.... Now I need iMessage so just deleted everything n re booted iPad!. Reset everything. Still can't get iMessage and iCloud!!! I'm not too bad cuz I can sync with hubby's iMac. But know I won't have iMessage.

Hello ruby10t,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Messages issues:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Before you start troubleshooting, learn the difference between SMS, MMS, and iMessage. The first step to resolving an issue with iMessage is toupdate your iOS software and your carrier settings to the latest versions. If iMessage still has an issue, follow the steps below for your issue.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD
Re: I accidently turned off my imessages and now they keep messing up and wont send imessages 

Similar Messages

  • I want to restart my iPad mini with retina display from scratch.  I can't

    I was trying to get some purchased apps onto my new ipad mini with retina display.  Problem, I can't seem to download everything so I want to start over.  How can I restart or reload my iPad mini?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT3775 I just upgraded my ipad to 6.0.  I can no longer expand my audio files so that I can move forwards and backwards.  I used to get a diagonal arrow to enlarge the screen and then have a bar that I can move to navigate. Can you help?

    I just upgraded my ipad to 6.0.  I can no longer expand my audio files so that I can move forwards and backwards.  I used to get a diagonal arrow to enlarge the screen and then have a bar that I can move to navigate. Can you help?

    Hi James,
    I am listening to embedded training files on the Quick Time player (I think). They cannot be copied to protect the information.  You only have the option of listening.   I used to be able to click on the Q in the audio strip and it would provide a diagonal arrow and this would allow me to expand the bar to a full screen. I then had the bar which would allow me to navigate in case I wanted to listen again or in case I wanted to move forward.  After my upgrade, I can no longer expand the strip to a full screen with the adjuster.  Now I have not chance to take a break in listening to these audios and most of them are at least an hour long.  Thanks for your help.

  • TS3899 I got my iphone to start sending emails, but still can't get the ipad to do so. Any suggestions?

    I got my iphone to start sending emails, but still can't get the ipad to do so.

    You should take it right back to the Genius Bar.  After they fix or replace it, make sure you can text, call and use all the functions before you leave the store.

  • This may be a duplicate but, I have a new ipad mini that I need to activate but I need to get my data from my 1pad 1 which has never been backed up.  How do I get the data from the ipad 1 to the new mini?  I have itunes acct and also Icloud acct.  Thanks

    I have a new ipad mini that I need to activate but I need to get the data from my old ipad 1 and install on the new mini.  I have a itunes acct and also icloud acct.  How do I back up the ipad 1 data and then activate the mini.  I assume I will need to transfer the sim from the ipad 1 to the mini.
    Thanks for any info
    wino454

    How to Transfer Everything from an Old iPad to New iPad
    http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
     Cheers, Tom

  • If i have iwork keynotes on my ipad mini and i wanted to know if i can transfer some documents that i did on my ipad mini keynotes to finish them on microsoft?

    if i have iwork keynotes on my ipad mini and i wanted to know if i can transfer some documents that i did on my ipad mini keynotes to finish them on microsoft?

    How can the iPad sync some songs if iTunes can't see the iPad?
    You need to get iTunes to see the iPad:
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days?

    I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?

    Does your Cloud subscription show on your account page?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Hi I am using iphone 4, since last few days i am facing problem in touch screen at times it doesn't work at all for 5-10 mins and then it works out itself. Can anyone pls suggest what the problem is and how it can be sorted out?

    Hi I am using iphone 4, since last few days i am facing problem in touch screen at times it doesn’t work at all for 5-10 mins and then it works out itself. Can anyone pls suggest what the problem is and how it can be sorted out?

    Did you recently updated to 7.0.4? Even for me same also issues.

  • HT200250 I couldn't open the files from a Canon XF 300 so I downloade the plugin from Apple but still can't open the files. I opened and clicked on the installer icon. I'm not sure the plugin was actually installed. can anyone help?

    I couldn't open the files from a Canon XF 300 into Final Cut Pro 7, so I downloade the plugin from Apple but still can't open the files. I opened and clicked on the installer icon. I'm not sure the plugin was actually installed. C
    an anyone help?
    Message was edited by: BigDealCam123

    As you probably know the Canon plug-in enables Log & Transfer in FCP7. I'm not sure whether it works with Final Cut Express or not.
    Look in Applications>Canon Utilities. I'm running 10.6 as well and that is where it's located on my machine.
    Good luck.
    Russ

  • I lost my iPad Mini and I didn't activate iCloud how can I find it  ?

    I lost my iPad Mini and I didn't activate iCloud how can I find it 

    Unfortunately, you cannot locate your device if you did not activate "Find My iPhone" on your device.

  • I downloaded songs from CD but I can't get them onto iTouch?  using iTunes 11, I downloaded songs from CD but I can't get them onto iTouch?  using iTunes 11

    I have downloaded songs from CD but I can't get them onto iTouch.  I have synced -- nothing.  I am using iTunes 11.

    Do others songs sync?
    Do apps sync?
    Do the songs play in iTunes?
    How are you syncing? See:
    iTunes: Syncing media content to iOS devices and iPod

  • My Cox Cable/Telephone splits to a telephone modem and a broadband modem.  The BB connects via ethernet to a Cisco Linksys E2500 wi-fi (whatever).  Can I plug my usb printer into the E2500, configure, and then print from my iPad?

    I have just purchased an iPad 2.  I have wi-fi for roku and have connected the iPad to it.  I want to print to my usb printer.  My connection is:  Cox Cable spit to telephone and broadband.  The broad band feed goes to a Cox modem and feeds the wi-fi.  The Cisco Linksys E2500, wi-fi's the Roku and iPad.  Can I USB from the wi-fi to the printer, configure (however), and then print from my iPad?
    If not, how?
    All comments will be appreciated.
    Alan G. Watkins

    the ipad cannot airprint to a non airprint printer.... i think that the only solution is to install helper software on a computer that has an attached printer and share it through the computer only...computer would have to be always left on
    try this....http://www.collobos.com

  • I want to factory reset my MacBook Pro to delete EVERYTHING in there and start from scratch but it won't work! HELPP!

    I have  a MacBook Pro and I have A LOT of files in there which I don't need anymore. And it's too much to sit and do it one by one so I want to completely reset it to factory settings. I tried booting it from the OS X CD by holding C during startup but it won't work. It just gets stuck on the white or gray screen with the apple logo. Nothing else. I'm assuming that it's because the software version on the Mac is 10.6.8 but the boot disk I'm using is 10.6.3? But I'm not sure.
    I also tried booting the CD with holding the option key and choosing the disk, same problem.
    Opening Disk Utility while regularly logged in, won't let me delete.
    Also tried changing the setting of what to boot in on startup, still gets frozen on the apple logo.
    Please what can I do to fix this and delete everything?
    Thank you in advance!

    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc.  Insert the disc into the
             optical drive and restart the computer.  After the chime press and hold down the
             "C" key.  Release the key when you see a small spinning gear appear below the
             dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, set the format type to Mac
             OS Extended (Journaled, if supported), then click on the Partition button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.

  • I have an A4 New iPad mini and a mid 2010 Mac Book Pro Can I get them all sinked with voice as i am loosing my vision?

    Hello Happy New year My name is Karen I have 3 Apple products A iPad mini version 16 GB  wi-fi no phone. A 4S 2011 16 GB. and a Mac Book Pro OS X Yosemite 10.10.. I'm loosing my vision and would like to sink the MAC and the iPad mini to voice commands.I also need them checked for iCloud to work on all for Dr. Appointments. What is the best way to go about having  the products serviced For my vision impairment? How much will it cost to get  all serviced to work together? the iPhone is all set I simply cannot read with it! Can someone assist me I live Near the Coconut point Mall.

    Doesn't work for your MBP.

  • Got my Iphone unlocked recently and now when inserted new sim, all the apps got wiped out, tried syncing it again from itunes but still it isnt getting installed. Can someone help?

    Hi,
    Recently I got my Iphone unlocked. Earlier I was using it on ATT n/w. After unlock i am using it in India with a service provider here.
    The problem that I am getting is, the phone was able to pick up the network and am able to make calls and messages. Data plan is still to be activated so cant confirm on that, but all the apps that were there on my phone got wiped out on its own. Since I wasnt sure as to what happend, so I reinstalled the apps today morning. I saw the apps getting installed and then left to get ready for my office. after nearly 30 mins I saw nothing was getting syncronized so disconnected the phone and left for Office. On reaching office when I checked for my usual Apps, I could see only the apple apps and none other available there. Need to know whats the issue and how to resolve it. Please can someone help me on this?

    I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
    Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
    Yes, my friend unlock the phone to use with Rogers but I don't know where

Maybe you are looking for

  • Need to run SQL in BQY

    Hi All, I have a client where he is using Custom SQL in the query section. The following SQL statement retrieves the results at the database side without any issues. But the same when used in the IR studio Custom SQL it is throwing errors like "inval

  • User Preferences on Startup

    I had a request from one of my users and I'm not sure if it can be done. It does not appear to be a preference available via GUI, but I thought I would ask here to see if there was another way. Is it possible to have TNS pre-selected as the default c

  • Migration from Ipad1 16Gb to Retina 32GB  procedure

    The existing tablet is on iOS 5.1.1, can all apps and/or content be selectively transfered to the new one ?. I presume that the data and apps stay untouched on the old one or perhaps I am wrong !

  • What happens if you install 800 MHZ Dram in a n IMac that originally had 667MHZ installed?

    What happens if you install 800 MHZ Dram in a n IMac that originally had 667MHZ installed?

  • Roles for Portal

    Dear experts. Please anyone can help me with the name for the following roles: Guided Procedure Content Administration User Administration System Administration. Also I want know the name of role and pluging for work with Visual Composer. Thanks in a