Can't get in and out markers to work
In Pro 7, I can't find the In and Out markers on some clips I've downloaded off Limewire. When I go File:New audio and record blank noise for a few seconds, the markers appear. How can I get the markers and trim down my Limewire clips? Thanks
g5 dual 1.8 tower, 512, 160hd Mac OS X (10.3.9)
I've seen a few times in the past what you are talking about. But, the in and out sections would fade in and out.
Try doing a save as to the movie and see if this makes the player a little more stable,,,,,,,,,,,,
Similar Messages
-
Can't get Dolby and DTS options to work
Hi!
Could anyone help me with my new Sound Blaster Z soundcard. I can't get Dolby and DTS options to work with my optical cabel under Cinematic tab in Pro Studio. I've googled enough, tried basically everything. Cinematic tab was never greyed out from the beginning. It either gave me intense, very high pitch noice when you acticated Dolby or DTS options or now... giving error which states:
"The SPDIF-out (Sound Blaster Z) device is currently being used by another application. Please close any application that may be playing audio to this device and try again."
I've re-installed drivers numerous times, tried different Windows operating system (7 and 8.1). Speakers (Sound Blaster Z) is made as default device, other stuff is disabled. I seriously don't know what to do, I'm god **** frustrated, because apart from Cinematic tab not working the sound isn't that great compared to my integrated motherboard soundchip.
// If it matters my speakers are Edifier S530DHi Kimbie,
Are you able to play back mp3 audio tracks?
I'm suspecting you are trying to play back encoded content.
Do share more details here so that I can assist you further.
Cheers,
Colin-CL -
I am locked out of my iphone. I changed the password and it still wont work. I changed it again and it is now disabled. I do not use itunes, icloud. How can I get into my iphone? I have changed my password and its not working. how can I start over?
Follow the instructions in this support document. http://support.apple.com/kb/ht1212
Without a backup, the use of iTunes or the use of iCloud, your only choice is to restore the device as new to remove the passcode. -
I did an hp update and now i can't get sound and my microphone isnt working, HP Pavilion dm4
I did an HP update about 2 hours ago. Now, I can't get any audio and the microphone isn't working.
you can try system restore, restore point where the critical update is
▬JM▬ -
HT4437 Can't get iTunes and monitor mirroring to work at the same time.
When I turn on my airplay on itunes it turns off the airplay from my monitor. I don't know how I've done it before but I sometimes can't play itunes and have it mirror my screen at the same time so I can use the visualizer. Whenever I turn one on, the other shuts off. I've done it before. Is there a specific sequence you need to run itunes and have the mirroring work too?
AkYou might try a simple headphone splitter like this:
http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW -
T42 HD replaced, can't get restore and recovery disc to work properly
Hello Support Team!
I purchased a ThinkPad from a company going out of business and was happy with it until the hard drive started to freak out. I replaced the hard drive with a new Western Digital 250 GB and ordered the recovery discs from the place in Atlanta. The discs arrived and I thought I was ready for my new computer. I'm following all the directions in the install, changing the startup to boot from the CD. I get the Recovery Welcome Screen and try to click on Restore Factory Settings. At this point, I get a screen that says "In order to proceed, your system must be rebooted". I haven't gotten past this point now matter what I try.
I like this little machine, but I'm afraid I can no longer breathe new life into it????
Do you have any suggestions?
Thanks!
slhackett
Solved!
Go to Solution.OK, that's a good start.
Have you wiped the drive before attempting to install the OS? If not, now would be a good time to do it.
Download the PC Doctor for DOS bootable CD, burn a disk and boot from it.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/1ety48ww.exe
Wipe the drive clean (under utilities), run diagnostics on the rest of the system.
If everything comes back clean, re-try installing the OS.
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Can't get Mellotron and VSTI's To Work
Hello, I hope someone can help. I recently purchased an HP Pavillion G7-1075DX from Best Buy. I can get the sound working for most things, but my husband is unable to get sound for the Mellotron and VSTIs, we have the latest drivers installed. I would appreciate any help or solutions.
Hi,
Are these (Mellotron and VSTIs) Softwares installed on your notebook or devices connected to it through Audio Channel?
I work for HP.
Click on the BLUE KUDOS button on the left to say "Thanks".
Mark answer with 'Accept as Solution', if it solves your problem. -
I can't get soundcheck and no gaps to work
I'm burning CDs from a mix of songs I import from my CDs onto a
playlist.In Itunes preferences I have sound check and no gaps between songs
checked off.When I play the CD on my CD player the gaps are there,some
longer than others and some songs are much louder than others.I need these
options to work because I'm a pro percussionist and I use these discs to
play along to at parties and events.Any help would be appreciated.Settings>General>Accessibiltiy>LED Flash on alerts>On. Note, it only works when the screen is locked.
-
Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.
Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password. I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes. Please help.
-
I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine. I moved the TV disconnected cables to move now I can only get video and no sound back on TV. Any suggestions ?
No answer but marking as answered because I want to clear my unresolved questions.
-
How can I get my iPhone out of landscape mode and back to portrait?
How can I get my iPhone out of landscape mode and back to portrait? Tilting the phone doesn't work.
Try following - 1 by 1:-
* make sure portrait lock is not on & try turning on/off several times
* turn off mobile and turned it back on
* hard reset by pressing lock and home at same time
If problem persist, you need to try following but be careful since the following impact your iphone.
* resetting all setting: this will reset all settings of your iphone back to factory setting
* resetting all setting by erasing all data: this will reset all setting and erase all data so do back-up and proper syncing and read relevant details
* restoring from itunes: this will also erase all data and take mobile back to day 1
last 3 options are last resort and only be done if you are sure you can restore your data.
Please don't hold me responsible for any data loss while doing last 3 options
Cheers! -
How can I get rejected photos out of LR5 and off the HD?
When I try to deleted rejected photos in LR5 on my iMac, I get a dialog saying they can't be sent to the trash. How can I get unwanted photos out of LR5 and off the hard drive?
Instead of hitting just the delete key, you need to hit ⌘+Del and one of the choices will be to remove from hard drive.
-
I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much
How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).
-
I put a cd in to download pictures and it did not read, and I can't get the cd out. There are no eject icons anywhere. How do I eject this cd?
Have a look at > Eject a stuck disk from your Mac DVD super drive
-
Is it just me or is the online help manual not always that helpful? When splittling clips in says to insert in and out markers but it does not really tell you how.
I found them in the clip drop down menu but they are grayed out. I want to be able to add back a few frames if needed when editing a video. I used to use pinacle studio and you could just drag the end of any clip to restore frames.
MichaelThere are several ways to add In & Out Points (not ever heard them called "markers") in a Clip.
One way is to Dbl-click on the Clip in the Project Panel. This will Open the Clip in the Source Monitor. There, you can use the In & Out Poiints (maybe these are the "markers" referred to), in the Source Monitor. When done, drag the Clip from the Source Monitor to the Timeline. This creates an Instance of that Clip. You can have unlimited Instances, and they can all have different In & Out Ponts.
Another way to do this is to drag the Clip from the Project Panel to the Timeline. At the Head of the Clip, click-drag to set the In Point. Now, click-drag on the Tail, to set the Out Point.
A variation of the above is to drag the Clip to the Timeline, then use the Scissors/Razor Tool (or Ctrl-K, with the CTI where you want to Cut) to Cut the Clip. Separate it, as is required. Then Rt-click on all sections to be removed, and choose Delete and Close Gaps.
Remember, your original AV file is NOT harmed, or changed in any way. You are only writing instructions to the Project file, PREL, telling it what to do, when you go to output the Timeline. Don't worry about "cutting" Frames out, as they are not really gone. You can click-drag on a Head, or Tail, to get them back again.
Now, when setting In & Out Points, if you are using Transitions, see this ARTICLE, as you WILL want to leave adequate Handles.
Good luck, and happy editing,
Hunt
PS - I highly recommend Steve's books, his Basic Training and Learning Series on Muvipix.com.
Maybe you are looking for
-
Down Payment not showing in PS Reports S_ALR_87013537
I am executing the ps report S_ALR_87013537, but i am not getting the Down Payment information. Down Payment are released from Finance against the Purchase Order Account assignment WBS. In Report S_ALR_87013537, Project Cost Plan, Actual Cost & Act
-
Urgent report compatability question
Post Author: BruceLawrence CA Forum: General We have some reports that are out of wack. The original .rpt file was created with CR v8. I've already tried to modify and save it with visual studio.net but the application that prints the report stated
-
Hi, I have just signed up for CC photographers version, on the promise that it would be much better than upgrading my current PS Elements. The main question I asked first was could I create phonebooks in A4. I was assured that this would be possible,
-
Hi, I dont not have Opatch folder in my oracle home ie Oracle\ora92 i have 9i database installed, to run the opatch utility can any one suggest me from where can i download the Opatch folder or utility apart from metalink. thanks Edited by: Janasheen
-
(Self explanatory, I hope.)