Can't get internal vSwitch to route through external vSwitch to connect to Internet using one NIC on 2012 R2 Datacenter with Hyper-V

I'm running into a bit of a problem here.
I have the following two virtual switches setup on one 2012 R2 Datacenter Physical Host w/ one (1) physical NIC:
Physical Host is running 192.168.50.120, GW: 192.168.50.1, SM: 255.255.255.0 (Cisco Router has the IP of 192.168.50.1). The Internal vSwitch Network (will contain 8 VM Servers) is 192.168.1.1. I want the VM Servers on 192.168.1.1 to be able to get Windows
Updates by being able to route through the 192.168.50.1 vSwitch but yet, still want the Networks segregated.
Both of these virtual switches/networks will be running through one NIC.
I initially setup RRAS to use NAT but I'm not sure if this is the correct configuration. It seemed to work but when I went to Activate my Product Key (via MSDN Subscription) it wouldn't recognize the key and therefore I couldn't run windows updates.
However, when I set up two of the VMs on 192.168.1.1 to use DHCP through the 192.168.50.1 Network it would work fine (i.e. DHCP, DNS and GW were all set to 192.168.50.1).
Any ideas on what I might be doing wrong or how I could setup an effective route between the two networks?
Any and all ideas are most welcome and appreciated.
Sincerely,
Wallace
Wallace Davis

Hi nbk5533,
The external virtual switch and internal virtual are isolated, you must set RRAS to connect both network zone, you can refer the following article to connect the internal
switch and external virtual switch.
Configuring Hyper-V for multiple subnets with only one NIC (Server 2008 R2 Edition)
http://blogs.technet.com/b/letsdothis/archive/2012/01/08/configuring-hyper-v-for-multiple-subnets-with-only-one-nic.aspx
The similar thread:
RRAS in VM
http://social.technet.microsoft.com/forums/windowsserver/en-US/486bcbb4-bf01-4946-b103-cd896e9dafb9/rras-in-vm
More information:
http://msdn.microsoft.com/en-us/library/windows/hardware/gg605194(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

My mac desktop will not provide sound from internal speakers. when I go to audio devices window it only shows airplay. How can I get internal speakers back.

My mac desktop will not provide sound from internal speakers. When I go to audio devices window it only shows airplay. How can I get internal speakers back.

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
 Cheers, Tom

I cannot access my voice mails. I can't get to voice mail either through the phone app nor the viooice mail app. When I try I get message the "can not complete call as dialed."t Any ideas?

I cannot access my voice mails. I can't get to voice mail either through the phone app nor the viooice mail app. When I try I get message the "can not complete call as dialed."t Any ideas?

backpack12,
Voicemails are a vital part of having a working phone. We do suggest that you look at the contact and then the number to make sure that it is *86. If you are needing to get your voicemails until then, please dial *86.
RobinD_VZW
Follow us on twitter @VZWSupport

How can i get pass my wrt160n router to access my server...

how can i get pass my wrt160n router to access my server from work ??

dmbanko wrote:
how can i get pass my wrt160n router to access my server from work ??
Hi
Well u might try giving a look at this Magic Link .
follow the instructions , you would be able to access ur server side from WAN .
and ofcourse , let us know for any more issues.
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Can we get user's phone number through coding

HI, I want to know that, how can we get user's phone number through coding and is it possible to send sms to some number without concerning to user. I required this for developing the mobile tracker application which will detect that the phone is stolen.

The developer forums are here: http://devforums.apple.com
Documentation for iOS developers is here: http://developer.apple.com/devcenter/ios/index.action

I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel.

I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel. Also the datafile share which ends in .aplzod is not created in Outlook. The Contacts and Calendar are sent to iCloud (verified on iCloud.com) but the iCloud folders are not created in Outlook in the Contacts and Calendar navigation panes.   I get a message toward the end of the sync process indicating that there was an unspecified error. I'm using the newest version of the iCloud Control Panel, the 32 bit version of Outlook 2010, Windows 7 64 bit, an iPhone 3GS, and the latest version of iTunes. Any ideas how to complete the sync process to the end?

Pretty much the same for me: Windows 7 64-bit, Outlook 2010, iCloud Control Panel 1.0.1, iPhone 3GS. Error report at end of setup process is shown below, and has been emailed. Any help please?
Your setup couldn't be started because of an unexpected error.
Error: 0x8004010F: ZebraBootstrap::ActivateDataFile: Could not create msgservice
AppleOutlookDAVConfig version: 3.0.42.0
Windows version (6.1.7601): Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit Local app data directory test: Pass Temp directory test: Pass Outlook version: 14 (14.0.6025.1000), x86 Outlook location (installed): C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE MAPI location: C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
<Not found>
Contents of C:\Windows\system32\mapisvc.inf
[Services]
MSFAX XP=Fax Mail Transport
[Default Services]
MSFAX XP=Fax Mail Transport
[MSFAX XPP]
PR_PROVIDER_DLL_NAME=FXSXP.DLL
PR_RESOURCE_TYPE=MAPI_TRANSPORT_PROVIDER
PR_RESOURCE_FLAGS=STATUS_NO_DEFAULT_STORE
PR_DISPLAY_NAME=Fax Mail Transport
PR_PROVIDER_DISPLAY=Fax Mail Transport
[MSFAX XP]
PR_DISPLAY_NAME=Fax Mail Transport
Providers=MSFAX XPP
PR_SERVICE_DLL_NAME=FXSXP.DLL
PR_SERVICE_SUPPORT_FILES=FXSXP.DLL
PR_SERVICE_ENTRY_NAME=ServiceEntry
PR_RESOURCE_FLAGS=SERVICE_SINGLE_COPY|SERVICE_NO_PRIMARY_IDENTITY
HKLM\Software\Microsoft\Office\14.0\Access\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\OneNote\Outlook Add-in
Message Classes
HKLM\Software\Microsoft\Office\14.0\Outlook
Dataviz
InstallRoot
Namespaces
    {0006F017-0000-0000-C000-000000000046}
      FolderTypes
        {00067800-0000-0000-C000-000000000046}
        {00067801-0000-0000-C000-000000000046}
        {00067802-0000-0000-C000-000000000046}
        {00067803-0000-0000-C000-000000000046}
        {00067804-0000-0000-C000-000000000046}
        {00067808-0000-0000-C000-000000000046}
        {00067828-0000-0000-C000-000000000046}
        {00067829-0000-0000-C000-000000000046}
        {0006782A-0000-0000-C000-000000000046}
      ViewTypes
        {00062000-0000-0000-C000-000000000046}
        {00062001-0000-0000-C000-000000000046}
        {00062002-0000-0000-C000-000000000046}
        {00062003-0000-0000-C000-000000000046}
        {00062004-0000-0000-C000-000000000046}
    {0006F018-0000-0000-C000-000000000046}
      FolderTypes
        {00067820-0000-0000-C000-000000000046}
        {00067821-0000-0000-C000-000000000046}
        {00067822-0000-0000-C000-000000000046}
        {00067823-0000-0000-C000-000000000046}
      ViewTypes
        {00062000-0000-0000-C000-000000000046}
        {00062001-0000-0000-C000-000000000046}
        {00062002-0000-0000-C000-000000000046}
        {00062003-0000-0000-C000-000000000046}
        {00062004-0000-0000-C000-000000000046}
Operations
    1ImportFile
    2ExportFile
    3ExportDataLink
    4ImportVCard
    5ImportAccounts
    6ImportVcalendar
    7ImportRss
    8ExportRss
    9ImportCFL
    ImportEudora
SchedulingInformation
    FreeBusySupport
SearchTypes
    {00067A00-0000-0000-C000-000000000046}
    {00067A01-0000-0000-C000-000000000046}
    {00067A02-0000-0000-C000-000000000046}
    {00067A03-0000-0000-C000-000000000046}
    {00067A04-0000-0000-C000-000000000046}
    {00067A08-0000-0000-C000-000000000046}
    {00067A10-0000-0000-C000-000000000046}
    {00067A11-0000-0000-C000-000000000046}
    {00067A20-0000-0000-C000-000000000046}
Setup
UpgradePath
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Office\Outlook
Addins
    AccessAddin.DC
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
    Microsoft Access
HKLM\Software\Microsoft\Office\14.0\User Settings\Excel_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
    Microsoft Excel
HKLM\Software\Microsoft\Office\14.0\User Settings\Misc_SpsOutlookAddin\Create\Software\Microsoft\Office\Outlook
Addins
    ColleagueImport.ColleagueImportAddin
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover
Create
    Software
      Microsoft
        Office
          14.0
            Outlook
              AutoDiscover
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Core
Create
    Software
      Microsoft
        Internet Mail and News
          Mail
        MSDAIPP
        Shared Tools
          Outlook
            Journaling
              Conversation
              Document
              E-mail Message
              Fax
              Letter
              Meeting
              Meeting Cancellation
              Meeting Request
              Meeting Response
              Note
              Phone Call
              Remote Session
              Task
              Task Request
              Task Response
        Web Service Providers
          FreeBusy
            office.microsoft.com
        Windows
          CurrentVersion
            Internet Settings
              TemplatePolicies
                High
              Zones
                4
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg
Create
    Software
      Microsoft
        Windows
          Shell
            Associations
              UrlAssociations
                mapi
                  UserChoice
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKLM\Software\Microsoft\Office\14.0\User Settings\PowerPoint_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
    Microsoft PowerPoint
HKLM\Software\Microsoft\Office\14.0\User Settings\Word_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
    Microsoft Word
HKLM\Software\Microsoft\Office\8.0\Outlook
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.msi
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.xml
HKLM\Software\Microsoft\Office\Outlook
Addins
    Apple.DAV.Addin
    BCSAddin.Connect
    Groove.OutlookProxyAddIn
    Microsoft.VbaAddinForOutlook.1
    OneNote.OutlookAddin
    OscAddin.Connect
    OutlookChangeNotifier.Connect
    Search.OutlookToolbar
    UmOutlookAddin.FormRegionAddin
AutoConfigDomains
    hotmail.*
    live.be
    LIVE.CA
    LIVE.CL
    LIVE.CN
    LIVE.CO.IN
    LIVE.CO.KR
    LIVE.CO.UK
    LIVE.CO.ZA
    LIVE.COM
    LIVE.COM.AR
    LIVE.COM.AU
    LIVE.COM.MX
    LIVE.COM.MY
    LIVE.COM.PE
    LIVE.COM.PK
    LIVE.COM.PT
    LIVE.COM.SG
    LIVE.COM.VE
    LIVE.DE
    LIVE.DK
    LIVE.FR
    LIVE.HK
    LIVE.IE
    live.in
    LIVE.IT
    LIVE.JP
    LIVE.MA
    LIVE.NL
    LIVE.NO
    LIVE.PH
    LIVE.RU
    LIVE.SE
    livemail.com.br
    msn.*
    msnhotmail.com
    tw.live.com
    windowslive.com
FormRegions
    IPM.Note.Microsoft.Exchange.Fax.UM.CA
    IPM.Note.Microsoft.Exchange.Voice
    IPM.Note.Microsoft.Exchange.Voice.UM
    IPM.Note.Microsoft.Exchange.Voice.UM.CA
    IPM.Note.Microsoft.Fax.CA
    IPM.Note.Microsoft.Voicemail
    IPM.Note.Microsoft.Voicemail.UM
    IPM.Note.Microsoft.Voicemail.UM.CA
    IPM.Note.Rpmsg.Microsoft.Voicemail.UM
    IPM.Note.Rpmsg.Microsoft.Voicemail.UM.CA
Outlook 10 Accounts
    Categories
      {ED475418-B0D6-11D2-8C3B-00104B2A6676}
      {ED475419-B0D6-11D2-8C3B-00104B2A6676}
      {ED475420-B0D6-11D2-8C3B-00104B2A6676}
    Types
      {4DB5CBF0-3B77-4852-BC8E-BB81908861F3}
      {ED475411-B0D6-11D2-8C3B-00104B2A6676}
      {ED475412-B0D6-11D2-8C3B-00104B2A6676}
      {ED475414-B0D6-11D2-8C3B-00104B2A6676}
SocialConnector
    SocialProviders
      OscAddin.SharePointProvider
HKCU\Software\Microsoft\Office\14.0\Common\HelpViewer\Applications\OUTLOOK
AdditionalCollections
    0
    1033
HKCU\Software\Microsoft\Office\14.0\Common\Migration\Outlook
HKCU\Software\Microsoft\Office\14.0\Outlook
Addins
AutoDiscover
    RedirectServers
Display Types
    Balloons
Journal
Message
Office Explorer
Options
    Calendar
    MSHTML
      International
    ToDoBar
Perf
    RoamingStreamsCache
      6BF937902986EF42A5D2882B309351BF
Preferences
Resiliency
    DisabledItems
Search
    Catalog
Setup
SQM
Today
    Folders
UserInfo
HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Core HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKCU\Software\Microsoft\Office\8.0\Outlook
HKCU\Software\Microsoft\Office\Outlook
Addins
    AccessAddin.DC
    ColleagueImport.ColleagueImportAddin
    iTunesAddIn.CalendarHelper
OMI Account Manager
SocialConnector

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13.

I upgraded from 4S to Iphone 5 but i lost all my messages how can i get them back on the new device ?i did back up using the icloud ?

i upgraded from 4S to Iphone 5 but i lost all my messages how can i get them back on the new device ?i did back up using the icloud ?
having said that i have an i pad as well and when i backed up i got the contacts which are on the i pad on my new iphone 5 not the ones who were on
i phone 4s ...
any one can advise me please what to do to get my stuff from iphone 4s to iphone 5 ,rather than the stuff from my ipad ?

If you made a backup using icloud, then restore your 5 to that backup. http://support.apple.com/kb/HT4859

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p but I did everything the same as the ones that did not. ***? Any ideas?

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p by "accident" but I did everything the same as the ones that did not. Same camera/settings (shot in 60i). I didn't really care cause I had to get some stuff done, but now I know I "can" dp them in HD but can't figure why the one went up to YT in full HD (and made a copy in my movies folder. That one project acted totally different than the other 5 but I didn't change anything. Can't get it to work again. ***? Any ideas?

No problem! If you're worried about more complicated edits (which in all honesty, should work no matter how many clips you select or how many effects are attached to them), you can always compound a clip first, and then copy it over after if you're afraid of lots of track clutter getting in the way. Not sure if they would break apart afterwards though if you wanted them to.

I purchased a MyBook Studio 4gb external hard drive. I can't get it to work properly. WD have assessed it and say its fine and that the problem is with Apple?

I purchased a MyBook Studio 4gb external hard drive. I can't get it to work properly. WD have assessed it and say its fine and that the problem is with Apple? Any ideas?

Hello EucaBlue!
So in Disk Utility, with the external harddrive selected, go to the Partition tab, and then under "Partition Layout:" select 1 Partition.
After than, verify that it is formatting the drive as "Mac OS Extended (Journaled) under "Partition Information"
Also verify that it's using using the GUID Partition Map under the Options button at the lower left of this window.
Then click apply and confirm that you want to format the drive. It will ask you if you're sure, and probably for an Administrator password.
Once your harddrive is formatted properly, you should be able to use Time Machine, or any other Mac backup software.
Happy tinkering!
Paul

I have a new iPhone 5S, how can I get my photostream photos from my previous phone(iPhone 4S) to my new one.

I have a new iPhone 5S, how can I get my photostream photos from my previous phone(iPhone 4S) to my new one.

Setting up iCloud with the same account data and switching on Photostream should do the trick:
I see different photos in My Photo Stream on each of my devices.
Your device will keep up to 1000 photos, even if they are older than 30 days. Photos older than 30 days are removed from the iCloud server, so all devices may not have the same photos, depending on when you enabled My Photo Stream.
If you prefer to have only the most current photos in My Photo Stream on each of your devices, and delete the older photos:
If there are any photos in My Photo Stream that you want to keep, save them to your Camera Roll, then back up your Camera Roll and other data using iCloud or iTunes.
Turn My Photo Stream off in Settings > iCloud > Photos (on a device using iOS 6, go to Settings > iCloud > Photo Stream). Confirm that you wish to Delete Photos.
Turn My Photo Stream back on. iCloud will automatically push your stored photos to your device.
Repeat these steps for each device.
copied from iCloud: Photo Stream Troubleshooting

Can't get iphone to recognize itunes on my computer. do i have to use the original cord to connect? i can't find the cord. please advise.

Can't get iphone to recognize itunes on my computer. do i have to use the original cord to connect? i can't find the cord. please advise.

Do you mean that iTunes doesn't recognize your phone when you plug it into your computer using the usb to dock cable? If so, see http://support.apple.com/kb/TS1538. (And yes, you need to use the usb to dock cable that came with your phone. If you dont' have it you'll have to buy another one.)

My screen opened, and with every click the page (letters/images) got bigger. I can not get it to return to normal image size. I have to use the slide bar to read across the page. What do i do to correct it back to normal size???

Question
My screen opened, and with every click the page (letters/images) got bigger. I can not get it to return to normal image size. I have to use the slide bar to read across the page. What do i do to correct it back to normal size???

Hi jholzworth,
It sounds like you might have accidentally hit the zoom button. Try hitting ''CTRL + 0'' to return it to normal size. Just so you are aware, ''CTRL'' and ''+'' will zoom in and ''CTRL'' and ''-'' will zoom out.
Hopefully this helps!

How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

Hi plichy,
Are you able to print to your new printer from other applications, or is it just Acrobat that doesn't recognize the printer? This document outlines some printer troubleshooting tips, and is a really great place to start: Troubleshoot PDF printing | Acrobat, Reader
Please let us know how it goes.
Best,
Sara

Can't get internal vSwitch to route through external vSwitch to connect to Internet using one NIC on 2012 R2 Datacenter with Hyper-V

Similar Messages

Maybe you are looking for