Can't get ipad to charge in car ups port

Can't get ipad to charge in ups port in car all other phone and others charge

ups port?  You mean USB?
USB ports do not provide enough power to charge iPads.  iPhones and other smaller devices need less power so can charge. 
If your car has a cigarette lighter port you can get an adapter for it to charge the iPad. Those put out more power than the USB ports.

Similar Messages

  • TS4222 Q:I have my iPad connected to my electrical outlet, but I can't get it to charge. It just says not charging in top right corner. What do I do?

    Q:I have my iPad connected to my electrical outlet, but I can't get it to charge. It just says not charging in top right corner. What do I do?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT4060 Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged informatio

    Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged information. How can I get it to charge beyond 1% so I can proceed to troubleshoot?

    I have had your exact problem with my old 3GS, now I cannot even get it to turn on, I still see that it is supposed to be charging though, but it never charges any so it seems.
    I replaced the Lower Dock Connector Assembly back when it still charged while hooked to my PC, and it found it made no real difference.
    http://www.amazon.com/gp/product/B003Y5YXLK/ref=oh_details_o05_s00_i00?ie=UTF8&p sc=1 
    At this point I am not sure if I should replace the battery and hope for the best, or just junk the phone, I cannot really sell it if I cannot reset it...

  • TS2776 can't get ipad to show in the sidebar of itunes so can't sync to my ipad

    can not get ipad into the sidebar of itunes so I can not continue to sync itunes from my PC to my ipad

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Can't get ipad to print from cannon MG 4250 printer, Can't get ipad to print from cannon MG 4250 printer

    Can't get ipad tp print from my cannon MG4250 printer need help please?

    here is canons guide
    http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/InkJet/PIXMA_MG_series/PIXMA_MG4250.aspx?faqtcmuri=tcm:13-957992&page=1&typ e=faq

  • Can't get iPad to print

    Can't get iPad to print.  Bought new printer for air print.  When tell to print it searches for printer, but always says not printer found

    Hmm, interesting that sites like airprint activator and others have sprung up to support the what seems like a problem with ipad wireless printing....and reading the many discussions here, it seem there is still a big problem between the devices that everyone has a different take on....I'm just glad I don't HAVE to print from my iPad......cause it ain't happened...

  • Where can I get the example application FuzzyEx Car Backward Parking.vi from LabView?

    Where can I get the example application FuzzyEx Car Backward Parking.vi from LabView? I've got the LabView 2009 and I don't find it.

    First verify if you have the PID and Fuzzy Logic Toolkit installed. To do that, you can just look at the "Control Design and Simulation" palette and you should see PID Palette and Fuzzy Logic Palette available. If you do not see, you need to install this toolkit.
    Second, in 2009 you have two options to access the example: you can directly open the example by using this address:
    C:\Program Files\National Instruments\LabVIEW 2009\examples\control\fuzzy\Car Parking\FuzzyEx Car Backward Parking.vi
    Or you can use the example finder and browse examples by going to: "Menu Help>>Find Examples" and "Toolkits and Modules>>PID and Fuzzy Logic Control>>Fuzzy Logic". yoiu should see "FuzzyEx Car Backward Parking".
    Hope this helps.
    Message Edited by Barp on 05-29-2010 12:59 PM
    Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

  • Can't get iphone4 to charge or power up

    Can't get iphone4 to charge or power up

    What kind of solution are you looking for alexandrescotti? other than the obvious fact that you dropped it and it's not working? There is no solution for hardware problems, only going and getting them fixed. If you dropped the phone and it stops functioning correctly after versus it stops functioning correctly from nothing, it's a little obvious as to why.
    If you didn't drop your phone and it's not working then go to an Apple store and have them take a look at it. If you dropped your phone and it's not working you can try and bring it back to get fixed, but if it's showing signs of physical damage they most likely aren't going to fix it, but you can give it a try anyways.
    Message was edited by: Envision99
    Message was edited by: Envision99

  • If I let my battery die on my mac bookpro on accident, how can I get the full charge back?, If I let my battery die on my mac bookpro on accident, how can I get the full charge back?

    If I let my battery die on my mac bookpro on accident, how can I get the full charge back?, If I let my battery die on my mac bookpro on accident, how can I get the full charge back?

    Connect the AC charge to the system. Battery will charge to 100%.
    But it is very bad to drain the battery to Zero. So don't make a habit of doing that.

  • HT1937 I am trying to charge my Iphone 4s and suddenly i can not get it to charge, what might be the problem?Brian

    Hey guys,
    I am trying to charge my Iphone 4s and suddenly i can not get it to charge, what might be the problem?Brian

    Are you using a original USB cable? if not, than it could be the cable. If you are charging the iPhone with your computer, sometimes the USB port where you plugged in the cable stops working. plug it into a different USB port. 

  • Can i use ipad air charge to charge iphone 5s

    can i use ipad air charge to charge iphone 5s? same power output?

    Read
    APPLE 12W USB POWER ADAPTER
    To find out whether the adapter is suitable for your device go to this link and click on “compatibility”
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=3c

  • TS3992 ipad message of not enough storage and can't get ipad to do anything

    ipad message of not enough storage and can't get ipad to go to settings or close. Won't turn on or off

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

  • Can u get ipad in installments from apple retial store

    can u get ipad 2 in installments from apple retial store

    Apple does offer consumer financing in some countries. Call or visit your local Apple Store or the online Apple Store for your country and ask.
    Regards.

  • I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy. Can any one help

    I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?

    Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
    I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
    You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
    In fact there's a new one for HP at the top of the list just now.
    You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

  • TS3274 i have purchased 3 ipads and we can't get them to charge

    I have purchased 3 ipads and I can't get them to charge

    How are you trying to charge them?

Maybe you are looking for