Can't get iPad to print

Can't get iPad to print.  Bought new printer for air print.  When tell to print it searches for printer, but always says not printer found

Hmm, interesting that sites like airprint activator and others have sprung up to support the what seems like a problem with ipad wireless printing....and reading the many discussions here, it seem there is still a big problem between the devices that everyone has a different take on....I'm just glad I don't HAVE to print from my iPad......cause it ain't happened...

Similar Messages

  • Can't get ipad to print from cannon MG 4250 printer, Can't get ipad to print from cannon MG 4250 printer

    Can't get ipad tp print from my cannon MG4250 printer need help please?

    here is canons guide
    http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/InkJet/PIXMA_MG_series/PIXMA_MG4250.aspx?faqtcmuri=tcm:13-957992&page=1&typ e=faq

  • Can not get ipad to print, my ipad mini prints perfectly on same printer

    Can not get ipad2 to print, printed the first time set the printer but will not print now.  Mini ipad prints just fine on the HP printer.  Ipad recognizes printer but will not print to it.

    Hello mariamac80,
    It sounds like you cannot print from your network printer on your MacBook. Printer issues can be a but tough to nail down, but I would recommend trying the troubleshooting in this article named:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I can't get anything to print from my ipad mini since I got the new update.  Does anyone know how to remedy this situation?   Thanks.

    I can't get anything to print from my ipad mini since I did the software update.  It recognizes the printer, but nothing happens when I tap print.  Can anyone help with this situation?  Thanks!

    Hi Justinescc,
    The bottom of this article contains some steps you can try if you're unable to AirPrint:
    AirPrint Basics
    http://support.apple.com/kb/HT4356
    Cheers,
    - Ari

  • HT3258 I have a Brother MFC-J4610DW and can't get it to print from my 2012 iMac over my lan.

    I have a Brother MFC-J4610DW and can't get it to print from my 2012 iMac over my lan. It works with the macbook pro and iPad. The dialog box states "Setting up 'BrotherMFC-J4610..." Unable to communicate." I worked with the AppleCare guy for a couple of hours. We got it to print via USB but when we switched to ethernet hook up via Time Capsule it won't communicate or install the printer.

    Try two things (separately, trying to add the printer in Print & Scan/fax prefs after each):
    Reset the printing system:
    http://support.apple.com/kb/ht1341
    Reset the router - power it off for 15 secs, then back on. Some routers cause these kinds of errors - not recognizing devices are present.

  • Photosmart 5510 when sending from ipad2 picture comes out small,can I get it to print full A4 size?

    when printing from my Ipad 2 the picture prints small ,can I get it to print to full A4?

    Hi eleybill,
    Welcome to the HP Consumer Printer Forums!
    Here is an article that explains how to print from an iPad to your printer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang​...=
    To answer your question, in that article it states:
    NOTE: Print options only apply to documents. All photo files print at a default image size of 4 x 6 in (101.6 x 152.4 mm).
    **UPDATE** 04/26/12
    After some testing, I have found if you change the paper size > A4, and Image Size > Custom, then you can pinch to zoom the image to the size of your liking.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • I have a Mac Air.. with 10.10 and just purchased a HP laserjet pro M201dw  .. I can't get it to print duplex in pages or word.  In pages not highlighted. does in Adobe for pdf.  Help!

    I have a Mac Air with 10.10 .  Just purchased a HP Laserjet Pro M201dw printer.  I can not get the duplex printing to work in Word or Pages.  It does work for PDF files in Acrobat Pro.  It won't for emails.  In Pages I see two- sided but it is dimmed.  I look at setups and it shows two -sided is off but can't find a way to change this setting.  In the printer setting itself, the duplex box is checked.  Need help.  Did notice the driver only goes up to 10.9 but it says on Apple site of supported printers this one is listed.
    Appreciate help in solving this issue.
    Thanks in advance for anyone willing to give me some time and assistance.
    Fran

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • TS2776 can't get ipad to show in the sidebar of itunes so can't sync to my ipad

    can not get ipad into the sidebar of itunes so I can not continue to sync itunes from my PC to my ipad

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

  • Where can I get an EPSON printer for the original iMac?

    Where can I get an EPSON printer for the original iMac?

    You should look for an Epson Stylus Color 740 or the higher-end 900 or 980, which are about 12 years old now.  All have USB connectivity, and while the 900/980 is a better/faster printer, it's harder to find the ink tanks for it at the usual office supply stores.  Ink tanks for the 740 series seem to be more readily available, without a special order.  There were Mac versions of these printers (the 740i and 900i), with blue/ice housings that were color-keyed to match the fruit-colored "blueberry" iMac and Blue & White G3 mini-tower.  There was no Epson printer that was color-keyed to the original Bondi Blue iMacs.

  • Can't get ipad to charge in car ups port

    Can't get ipad to charge in ups port in car all other phone and others charge

    ups port?  You mean USB?
    USB ports do not provide enough power to charge iPads.  iPhones and other smaller devices need less power so can charge. 
    If your car has a cigarette lighter port you can get an adapter for it to charge the iPad. Those put out more power than the USB ports.

  • How can I get it to print output of inputstream?

    Please forgive me for running two similar thread but the other thread ahs strayed from primal concern of coding.
    Some help with the code please???
    I have set up an inputstream and outputstream to the "ftp process" of java.lang.Runtime I have sent the command "dir" to ftp.
    But How can I get it to print all the files etc of the "dir" sent to ftp process?
    Also I have just read that it is perhaps better to buffer the STREAMS.
    How do I do this for outputsteam? I think I have some clue to do for inputstream with bufferedreader?
    import java.lang.*;
    import java.io.*;
    public class RuntimeFTP{
    public static void main(String[] arg){
    Runtime rt = Runtime.getRuntime();
    String[] callAndArgs = { "ftp.exe", "jaguar.wmin.ac.uk" };
    Process process = null;
    OutputStream os = null;
    InputStream is = null;
    String login = "w0109699";
    String password = "11041976";
    String dircommand = "dir";
    byte[] barraylogin = login.getBytes();
    byte[] barraypassword = password.getBytes();
    byte[] barraydircommand = dircommand.getBytes();
    try
    process = rt.exec(callAndArgs);
    process.waitFor();
    System.out.println("Process exit code is: " + process.exitValue() );
    catch(IOException e)
    System.err.println("IOException starting process!");
    catch(InterruptedException e)
    System.out.println("Interrupted waiting for process!");
    try
    os = process.getOutputStream();
    os.write(barraylogin);
    os.write(barraypassword);
    os.write(barraydircommand);
    catch(IOException io)
    System.out.println("io exception write to outputstream");
    try
    is = process.getInputStream();
    while (is.read() != -1)
    How can I print the data to the user
    i.e all the data obtained from the "dir" command sent to ftp?????????
    catch(IOException io)
    System.out.println("io exception read fron inputstream");

    the above code does not work so I have abondaned it.
    I want to integrate an ftp program into a program I am working on. I have scoured the net for reuse able code and come across a "t or Linlyn ftp program" which claims is easily integrate able into larger applications.
    The problem is did does not seem to work and gives me errors. I would be grateful if someone could tell me why I am getting the error, here is the error:
    C:\My_DL_Dap\ftp in java>appletviewer t.java
    Warning: <applet> tag requires width attribute.
    java.security.AccessControlException: access denied (java.net.SocketPermission j
    aguar.wmin.ac.uk resolve)
    at java.security.AccessControlContext.checkPermission(AccessControlConte
    xt.java:270)
    at java.security.AccessController.checkPermission(AccessController.java:
    401)
    at java.lang.SecurityManager.checkPermission(SecurityManager.java:542)
    at java.lang.SecurityManager.checkConnect(SecurityManager.java:1042)
    at java.net.InetAddress.getAllByName0(InetAddress.java:909)
    at java.net.InetAddress.getAllByName0(InetAddress.java:890)
    at java.net.InetAddress.getAllByName(InetAddress.java:884)
    at java.net.InetAddress.getByName(InetAddress.java:814)
    at java.net.InetSocketAddress.<init>(InetSocketAddress.java:109)
    at java.net.Socket.<init>(Socket.java:118)
    at Linlyn.ftpConnect(t.java:326)
    at Linlyn.<init>(t.java:236)
    at t.init(t.java:83)
    at sun.applet.AppletPanel.run(AppletPanel.java:341)
    at java.lang.Thread.run(Thread.java:536)
    I would also be grateful if someone could try out the program and tell me if it works for them, then I could determine if it is because ftp clients are being blocked by my server. The ftp program is very small, here is the url:
    http://www.afu.com/jdownload.html
    1) compile the code
    2) fill in everywhere it requests "your-server" "username" and "password"
    3) to run appletviewer t.java

  • PDF's print two sided.  How can I get them to print on single pages?

    PDF's print two sided.  There is no option shown.  How can I get thelm to print on single pages?

    1: Go into iTunes.
    2: Right click on the song and choose 'Get Info' (or press cmd+i on a Mac).
    3: In 'Info' change the album name to the one you want it to go into, when you start typeing it should automatically come up.
    4: Check that the disk number and track number is correct.  It should be automatic.
    4: Press OK.
    You should see it go into the album now.

  • TS3992 ipad message of not enough storage and can't get ipad to do anything

    ipad message of not enough storage and can't get ipad to go to settings or close. Won't turn on or off

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

Maybe you are looking for