Can't get it working - just want to view another desktop on my home network

I need to be able to view (not control) the desktop of my PowerMac that is connected to my Zoom DSL modem in another room. I want to view that desktop from my MacBook Pro connected wirelessly to the modem.
The PowerMac is running Mac OS X 10.3.9.
The MacBook Pro is running Mac OS X 10.4.11.
On the Zoom modem I've turned on port forwarding for port 5900 (is this necessary?).
On the PowerMac I have turned on Apple Remote Desktop in the Sharing preferences, and opened port 5900. On the MacBook Pro I have installed Chicken of the VNC, but it can not connect to the PowerMac. I can login to the PowerMac and share files using Mac OS X, and I can successfully ping the PowerMac with Network Utility. But when I try to port scan the PowerMac the scan proceeds for several minutes without finding anything (scanning the range 5900-5910).
When I try to connect using CVNC the error is "Connection Refused:Conect()".
I'm working at the very edge of my understanding of networking here. I'm really not sure about how I've done things, and I have no idea how to troubleshoot this.
Any suggestions? Thanks!

Okay, I'm going to answer my own question. I needed to update my ARD client to 2.1 to get this working. Latest is 2.2 so I may try that next, but for now 2.1 is working fine.

Similar Messages

I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i c

I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten

1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi.

My printer is on line i just can not get it working on my laptop

my printer is on line i just can not get it working on my laptop

Hi @murphyett ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Printer and not working Wirelessly. Here is a link to the HP Print and Scan Doctor. The HP Print and Scan Doctor will run a check on your system.
What is the model of printer? I would be happy to assist if needed as there are many models of HP Printers I would need the model number. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I want to buy an ipad 2 3G but i am not a US resident, how can i get to work on a local network NOT verizon or AT

i want to buy an ipad 2 3G but i am not a US resident, how can i get to work on a local network NOT verizon or AT&T

From your screen name would it be safe to guess that you will be using it in Egypt? If your carrier uses is a GSM network you can do as Chris suggests.
From the Apple page http://www.apple.com/eg/buy/ there is a link to Arab Buisness Machine, they sell the iPad 2 and offer local support should any problems arise.

Can t get to work tint2 launcher

I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
i've set up the panel the way i want but i would like to have a few launcher
I've try serveral thing but i can't get it to work,
and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
tks
Here my tint2rc
# TINT2 CONFIG FILE
# horizontal panel
# squared taskbars
# idirae config
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #808080 20
border_color = #ffffff 10
# ID 2 - task active
rounded = 0
border_width = 0
background_color = #feffff 0
border_color = #d8d8d8 0
# ID 3 - task
rounded = 0
border_width = 0
background_color = #F5F5DC 0
border_color = #000000 0
# ID 4
rounded = 0
border_width = 1
background_color = #888888 0
border_color = #ED2323 60
# ID 5 - taskbar
rounded = 0
border_width = 1
background_color = #feffff 10
border_color = #ffffff 10
# ID 6 - active taskbar
rounded = 0
border_width = 1
background_color = #feffff 30
border_color = #ffffff 30
# ID 7 - tooltip
rounded = 3
border_width = 0
background_color = #222222 90
border_color = #222222 90
# ID 8
rounded = 0
border_width = 1
background_color = #888888 20
border_color = #888888 20
# Panel
panel_monitor = all
panel_position = top left horizontal
panel_items = LTSBC
panel_size = 100% 32
panel_margin = 0 1
panel_padding = 3 3
panel_dock = 0
wm_menu = 1
panel_layer = bottom
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 1.5
autohide_height = 6
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 5 2
taskbar_background_id = 5
taskbar_active_background_id = 6
taskbar_name = 1
taskbar_name_background_id = 0
taskbar_name_active_background_id = 0
taskbar_name_font = Crisp 12
taskbar_name_font_color = #ffffff 30
taskbar_name_active_font_color = #ffffff 50
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 0
task_centered = 1
task_maximum_size = 20 20
task_padding = 0 0
task_background_id = 3
task_active_background_id = 2
task_urgent_background_id = 4
task_iconified_background_id = 3
# Task Icons
task_icon_asb = 80 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 80 0 0
# Fonts
task_font = BankGothic Md BT 10
task_font_color = #696969 60
task_active_font_color = #696969 100
task_urgent_font_color = #696969 100
task_iconified_font_color = #696969 60
font_shadow = 0
# Launcher
launcher_icon_theme = elementary
launcher_padding = 2 2
launcher_background_id = 1
launcher_icon_size = 20
# Specify icon theme names with launcher_icon_theme.
# if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
#launcher_icon_theme = AwOkenWhite
# Each launcher_item_app must be a full path to a .desktop file
launcher_item_app = /usr/share/applications/chromium.desktop
launcher_item_app = /usr/share/applications/gparted.desktop
# Clock
time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
time1_format = %I:%M %p
time1_font = BankGothic Md BT 9
#time2_format = %A, %B %d
#time2_font = Ubuntu-L 7
clock_font_color = #ffffff 80
clock_padding = 5 0
clock_background_id = 5
clock_lclick_command = gsimplecal
#lock_rclick_command =
# System Tray
systray = 1
systray_padding = 2
systray_sort = right2left
systray_background_id = 5
systray_icon_size = 20
systray_icon_asb = 100 0 0
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 7
tooltip_font_color = #ff0000 100
tooltip_font = Roboto-Thin normal 9.0
# Mouse
mouse_middle = none
mouse_right = toggle
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 1
battery_hide = never
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 80
battery_padding = 5 0
battery_background_id = 5
# End of config
Last edited by jolejo07 (2013-07-05 01:39:25)

I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21)

I have 2 itunes accounts - one work a/c and one home a/c, but when i sign in at home only my home songs appear even if I sign in my work a/c. I have authorised both computers to show both a/cs. How can I get my work a/c songs to appear at home?

I have 2 itunes a/cs one at work and one at home. Both computers are authorised for the 2 a/cs, but I can;t get my work a/c songs to show on my home computer, even though I sign in my work a/c, and I can't get my home songs to show up on the work computer even though I sign in my home a/c. V. frustrating!

Hi,
You will have to manually copy your music. Get a pen-drive big enough to accommodate all your music. And follow these steps:
1. Create a new folder on the pen-drive.
2. Copy the music from your work computer to the folder you just created. It's in (yourhomefolder)>Music>iTunes>iTunes Media>Music if you're using a Mac, or in C:\Users\(yourusername)\Music\iTunes\iTunes Media\Music if you're using Windows.
3. Now on your home computer quit iTunes, and copy your music from work to the "Automatically Add to iTunes" folder in (yourhomefolder)>Music>iTunes>iTunes Media.
4. Start iTunes. It will automatically start to process the files and move them to the appropriate place.
Repeat these steps with your music from home on your work computer. Also I suggest to use only one iTunes account if possible.
Hope it helps
Regards,
Gábor

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It te

Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?

The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

Can't get Mail working properly

I just got my new MacPro this week, and it's really great except for I can't get Mail working right. I've set up my accounts and a few emails come through, though not many, and because it's been a week since I've been online, there should be many more than that. Also, I can't send any emails at all, no matter what I do. They will eventually go into my Sent box, but I've been sending them to myself to see if it's working, and they never come through. I spent an hour on the phone yesterday with the tech support for my ISP, and they told me that I'd have to talk to the Apple techs because they didn't have current info for *Mail 3.1*, the version I have, that the latest they had was for 2.something. So I called the Apple tech support and spent 2 hours on the phone with them, and they weren't able to help me get it going correctly either. It keeps giving me error messages such as Connection Failed, or Unable to Receive Mail, saying "there may be a problem with the mail server or network" and that "the connection to the server on ... port has timed out." I'm on DSL and am always online, so I know it's not the internet connection that's the problem. Can anybody give me some advice on what I should try? Any help will be gratefully appreciated!

Is your ISP Verizon, Demon, or Glocalnet, then it might be Apples biggest Leopard Bug in conjunction with these ISP:s POP-servers.
The one that randomly changes the settings in "advanced" from "password" to "APOP".
The visual result of this bug is that you will get a popup-box where Mail asks you to enter your password. (Which is useless entering, since the preference settings are changed.)
My advice counts only when you are supposed to use "password" as the correct setting in "Advanced" and in conjunction with some ISP:s.
Michael

Can't get webutil working on AS

Hi All,
As topic, I can't get webutil working on the application server. I can run individual forms or sessions that do not utilise webutil. As soon as I have baseHTMLjinitiator/baseHTMLjpi/baseHTML defined in the bit of the formsweb.cfg that I am using, I get this problem. The webutiljini.htm etc are located in the forms/server directory as they should be.
I've got it working fine on my 10.1.2 developer suite XP platform.
I've been trying without success on the App Server. Version 10.1.2 under Win2003
I have been right through the installation instructions several time trying to see what I have missed.
I have installed version 1.0.6 of webutil and version 1.8 of jacob.
I try and run the wu_test_106 form, and all I get is "Applet Started" at the bottom of the browser window, and a blank browser window.
My URL is
http://10.64.125.51:7778/forms/frmservlet?config=webutil1
The config in the formsweb.cfg is:
[webutil1]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=generic
form=wu_test_106.fmx
width=100%
height=100%
separateFrame=True
The other parameters are default. If I try a different form name it makes no difference.
I've done the other configuration stuff, default.env, signing jar files, etc.
The java console just shows:
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\griggto01
Proxy Configuration: Manual Configuration
Proxy:
Proxy Overrides:
JAR cache enabled
Location: C:\Documents and Settings\griggto01\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://10.64.125.51:7778/forms/java/frmwebutil.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Thanks for your help.
Tony

Hi Tony,
Form your post it doesn't look like jacob.jar is being loaded. Can you confirm that you have the following files in the <ORACLE_AS>/forms directory:
java\
   jacob.jar
   frmwebutil.jar
webutil\
   d2kwut60.dll
   jacob.dllAlso open up your default.env file and check that
ORACLE_HOME         -- is correct
FORMS_PATH            -- has the path where wu_test_106.fmx is located
WEBUTIL_CONFIG      -- is correct (I've experienced what you describe when this path was invalid)
CLASSPATH             -- contains frmwebutil.jar
Regards
Tom Casserly

Can't get my work email to load on my new phone

I can't get my work email onto my Droid X. Anyone know the trick?

Carl3 wrote:
I can't get my work email onto my Droid X. Anyone know the trick?
First quesiton I have is do you have authorization to access your work email from your Droid X? Just knowing the email address and password is enough for you to get your personal email, but your employer must approve remote access.
If it's okay with your employer, you may also need to know the incoming and outgoing email server addresses, the port number, and your username on your employer's email server. If you're not sure what they are, check with your IT admin AFTER you get confirmation that it's okay to get your email.

Australia Post Shipping - Can't get to work

Hi,
I have read all the online support docs I can find and I just can't get Australia Post Shipping to work on our site for international orders.
Everywhere it says:
Choose your shipping provider
Enter your account details
Your customers see real time shipping costs!
But Australia Post selection doesn't let us enter account details - does anyone know where I enter them?
(see image at bottom)
And after I allocated sizing, weights etc to every product it doesn't even look like it even works:
(see how there are no options to select)
Does anyone have any ideas on how to get it to actually work? I can't imagine BC would role something like this out if it didn't even work but from all my googling I can't see that anyone actually uses it (or at least comments on using it!)
Would love any help

I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21)

Whenever I ask Siri a question it just links me to a website instead of just saying the answer. The reason I ask Siri is because i am not in a position to look at my phone. How can I get Siri to just answer my questions??

Whenever I ask Siri a question it just links me to a website instead of just saying the answer. The reason I ask Siri is because i am not in a position to look at my phone. How can I get Siri to just answer my questions??

I found that the only time Siri will read anything to you is if it finds a Wikipedia article. Siri will let you know it found that, and ask if you want it to be read out loud. Other than that you will hear the "I found this, take a look".
The only other thing you can do is activate "Speak Screen". It will involve you taking a look at your phone for a moment, selecting what you'd like to look at, but Siri will read the content to you. It's in Settings > General > Accessibility. Once activated, all you have to do is slide two fingers from the top of the screen and you will have it read to you. I use it all the time because of my astigmatism. It's pretty useful.

Flex 4 - Can not get ADG working

Hello,
I have just downloaded flex 4 SDK (flex_sdk_4.0.0.14159_mpl) and Flash Builder 4.
I have created a test prroject and can not get it working with Advanced Data Grids.
Here is my set up: Created Project called Test, this contains one MXML file that contains an Advanced Data Grid:
<fx:Script>
        <![CDATA[
            import mx.collections.HierarchicalData;
            [Bindable] private var _test:HierarchicalData;
        ]]>
</fx:Script>
<mx:AdvancedDataGrid id="test" dataProvider="{_test}">
   <mx:columns>
       <mx:AdvancedDataGridColumn headerText="COL_A" />
       <mx:AdvancedDataGridColumn headerText="COL_B" />
       <mx:AdvancedDataGridColumn headerText="COL_C" />
    </mx:columns>
</mx:AdvancedDataGrid>
This works Okay. I then include a libary into the project, the libary, also built with the same SDK, contains a class that contains nothing but one single method that does nothing:
<mx:Canvas xmlns:fx="http://ns.adobe.com/mxml/2009"
           xmlns:s="library://ns.adobe.com/flex/spark"
           xmlns:mx="library://ns.adobe.com/flex/mx"
           width="100%" height="100%">
    <fx:Script>
        <![CDATA[
            import mx.controls.advancedDataGridClasses.AdvancedDataGridColumn;
            private function test(col:AdvancedDataGridColumn):void { }
        ]]>
    </fx:Script>
</mx:Canvas>
Launcing now causes the error
TypeError: Error #1007: Instantiation attempted on a non-constructor.
    at mx.controls::AdvancedDataGridBaseEx/getSeparator()[E:\dev\4.0.0\frameworks\projects\datav isualization\src\mx\controls\AdvancedDataGridBaseEx.as:4618]
    at mx.controls::AdvancedDataGridBaseEx/createHeaderSeparators()[E:\dev\4.0.0\frameworks\proj ects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4660]
    at mx.controls::AdvancedDataGrid/createHeaderSeparators()[E:\dev\4.0.0\frameworks\projects\d atavisualization\src\mx\controls\AdvancedDataGrid.as:2428]
    at mx.controls::AdvancedDataGridBaseEx/drawSeparators()[E:\dev\4.0.0\frameworks\projects\dat avisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4574]
    at mx.controls::AdvancedDataGridBaseEx/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\ datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:2119]
    at mx.controls::AdvancedDataGrid/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\datavi sualization\src\mx\controls\AdvancedDataGrid.as:2899]
    at mx.controls.listClasses::AdvancedListBase/validateDisplayList()[E:\dev\4.0.0\frameworks\p rojects\datavisualization\src\mx\controls\listClasses\AdvancedListBase.as:3468]
    at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.0.0\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:663]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:718]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.0.0\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1072]
Removing the method in the libary project alivates the problem. But I can not see why this is a problem in the first place!!??!?!?!?!?!?!?
Can anyone help. this is really weird.

I'm getting the same error. This is due to a bug in AdvancedDataGridBaseEx. The offending code is:
            var headerSeparatorClass:Class =
                getStyle("headerSeparatorSkin");
            sepSkin = new headerSeparatorClass();
if getStyle returns null then you will be trying to instantiate headerSeparatorClass is going to cause the "Instantiation attempted on a non-constructor" error.
Apparently someone thought that the headerSeparatorSkin would never be null.

I have the Photoshop Photography Program and every time I try open Photoshop CC it asks me for a Serial Number. It keeps saying my trial period has ended. How can I get this working since Adobe doesn't issue Serial Numbers for CC.

I have the Photoshop Photography Program and now every time I try open Photoshop CC it asks me for a Serial Number. It keeps saying my trial period has ended. How can I get this working since Adobe doesn't issue Serial Numbers for CC.

Jodie84,
I have just checked your account and found that you indeed have bought a Creative Cloud for Teams subscription but you have assigned the single seat to another user hence you ( If you are using your own Adobe ID ) are getting the trial error message.
Two options : Either reassign the seat to your self or add an additional seat and invite your self in the same Team.
Cheers,
Kartikay Sharma

Can't get it working - just want to view another desktop on my home network

Similar Messages

Maybe you are looking for