Can't get k8n diamond plus working with 4x1Gb

I managed to get the DDR memory frequency running at 333MHz using only 2x1Gb in the Green slots of the motherboard (as listed in page 2-7 of the K8N Diamond Plus Manual).
However, when I add the other 2x1Gb modules to the Purple slots, the system does not even come up.
I've then went back to 2x1Gb in the Green slots so that I can get the system to fire up, gone into the BIOS and adjusted the settings according to the configurations below and restarted.
I've then shut-down and re-inserted the other 2x1Gb into the Purple slots so that 4Gb is present, then rebooted but the system still does not come up.
Adjust CPU FSB Frequency: 200.0
Current DDR Memory Frequency (this is Read Only) DDR 333
Adjust DDR Memory Frequency: set to Manual
Memory Clock: Tried all of the following for DRAM/FSB 1/2,2/3,5/6,1/1,5/4
Does anyone know of any person who has got a K8N Diamond Plus working with 4x1Gb ?

Tried removing one of the video cards and disabling the sound card (as suggested by http://www.asktheramguy.com/v3/showthread.php?t=65436), but the system still didn't fire up with 4Gb RAM.
Hans,
I managed to find the D-Bracket and here's the sequence that the LEDs cycle through:
LED1
LED2
LED3
LED4
DESCRIPTION
1
red
red
red
red
System Power ON
2
red
red
red
green
Initializing Video Interface
3
red
red
green
green
Initializing Hard Drive Controller
4
red
red
red
red
System Power ON
5
red
red
red
green
Initializing Video Interface
6
red
red
green
green
Initializing Hard Drive Controller
7
green
red
red
green
BIOS Sign On
8
green
green
red
green
Assign Resources to all ISA
Row 7 of the table above indicates "BIOS Sign On" and this should start showing information about logo, processor brand name etc, but this does not occur.
The cycle (phases 1 to 8) then repeats incessantly.

Similar Messages

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

How can I get my ipod to work with itunes?

When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Can't get out.print to work with XML jsp tags

<jsp:scriptlet>
if(ErrorTrap == true) {
out.println("<tr><td colspan=\"center\" align=\"center\">There was" an error while processing the form</td></tr>");
ErrorTrap = false;
</jsp:scriptlet>
I can't get this script to work with the XML stype jsp tags. It keeps telling me the <jsp> tags are untermintaed. Is there a special trick to fix this or do I have to use the non-XML type tags?

Sorry, I didn't mean to put the extra " in the out.println text string. :-/

Can't get Palm Zire to work with windows 7

Can't get palm zire to work with windows
Post relates to: Palm Pilot

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How can I get elements 11 to work with 16 bits photos?

In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
Either way is expensive compared to photoshop elements.
http://www.adobe.com/products/cs6.html?promoid=JOLIS

How can I get photoshop CS2 to work with Windows 8.1?

how can I get photoshop CS2 to work with Windows 8.1?

Have a look at
http://forums.adobe.com/message/4976720
Cheers
John

How can i get ical invitations to work with outlook users?

how can i get ical invitations to work with outlook users?
I can send ical meeting invitations but outlook users are having problems having the meeting show up in their calendar….

My Epson is able to do scans using Image Capture without any problems at all.
Allan

How can I get Phillips Fidelio to work with ios7

How can I get Phillips Fidelio to work with ios7. It worked with the previous operating system

Not sure if this is the same problem others are having, but I used to play music on my Philips Fidelio by opening the Music app on my ipad and clicking on the box with the triangle (which has now disappeared in the new OS). However, if you have the philips dockstudio app, the box still appears there and I was able to get my speakers working again.

How can I get my iMac to work with scanners?

How can I get my iMac to work with scanners? The scanners scan just fine, but not to my iMac. I've tried Epson and HP all-in-ones; it makes no diffference. I'm becoming extremely displeased, but don't know at whom I should be displeased, the printer guys or Apple. Help?

My Epson is able to do scans using Image Capture without any problems at all.
Allan

HT4623 iPad 3 how can l gets the SIM card works With iPad 3

As all we know its christmas time l just received the gift for iPad 3 & l notice that it need SIM card for me to use as the phone & data,how can l gets the SIM card works With iPad 3

Remember am in South Africa & we got few carrier nets am in MTN provide & I c my sim looks so big to fit on my iPad

Is there an adapter can i get so square will work with the otterbox i have on my iphone

Is there an adapter can i get so square will work with the otterbox i have on my iphone, I love the otterbox and want to keep it on all the time. not only does it protect my iphone it, it makes it easy for me to hold because I have trouble with my hands. please help

That's a good question. The main problem with the Square readers is that the plug is designed to send data to devices, rendering most headphone extension cables useless.
Reading another forum I saw this: http://www.amazon.com/gp/product/B001BN7XSM
Give that a try. Claims to work perfectly for Square. NOT headphones.

I can't get airport extreme to work with iPad

I can't get airport extreme to work with iPad

Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour.

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

Can't get Report Builder to work with Apache Webserver

I'm running ColdFusion 7.0.1 and have it configured to work
with Apache. I've got an application named realestate. I created
the following entry in my host file:
127.0.0.1 realestate
In Apache, I've created a virtual server that uses the
realestate server name. But I can't get the Report Builder to
connect to it at all. When I run the wizard, I try to install an
RDS server. I've used 127.0.0.1 for the host name as well as
realestate and I've set the port to 80. I can't get port 8500 to
work at all. I set my ColdFusion root location to fall under
Apache's htdocs. Should I have left it under C:\CFMX7 ? How would I
change the location?

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Can't get k8n diamond plus working with 4x1Gb

Similar Messages

Maybe you are looking for