Can't get Logic to start in new OS

Question

I haven't used my Logic Studio since I upgraded to Lion OS and now I can't get it to work. If I look for updates using Apple's website it can't find my serial number... Any ideas? Also when I run the ap it states "You can't use this version of the application Logic Pro.app with this version of Mac OS X. You have logic pro.app 9.0.0. I can't believe I've paid 500$ for a program that won't open up in the new OS system

Answer 1

Hi all, I'm new to the forum
Have installed the above mentioned server running the x86 platform with Solaris 10 1/08 with broadcom ethernet adaptor cards.
My network connections are giving issues. bge0 and bge1both show physical activity and these are my configs
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.1.170 netmask ffffff00 broadcast 192.168.1.255
ether 0:11:25:22:1f:26
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.0.0.1 netmask ffffff00 broadcast 10.255.255.255
ether 0:11:25:22:1f:27
My default router also exists
# vi /etc/defaultrouter
192.168.1.254
~
The hosts file
# vi /etc/hosts
::1          localhost
127.0.0.1 localhost
192.168.1.170 hostname1      loghost
10.0.0.1      hostname1
~
~
And the device files
# vi /etc/hostname.bge0
hostname1
~
~
# vi /etc/hostname.bge1
hostname2
~
~
All these including restart procedures aren't working.
I dont seem to be able to get to other devices on the network yet the local TCP/IP stack behaves just OK. I can ping all the interfaces but cannot ping any device on the network.
During install too, I attempted to acquire a dhcp address via the network from a dhcp server that serves IPs to our network but failed thus proceeded to static addressing.
Any advice please?