Can't get "Mail" to load a group

Can't get "Mail" to load a "Contact Group." Group appears normal in "Contact" List. Used to work properly using OSX "Lion." Have had problems since I installed ODSX Maverick.

Michael:
     Right! I had to prepend a ../ to the url.
And a [Bindable] to variable, and IT Works!
And, all this was the Easy part! <G>
Thanks!

Similar Messages

  • Help me fix my email when i get the message, server has failed , can not get mail

    How do I fix my email when I keep getting the message, can not get mail, server connection has failed? In very plain basic english or even on youtube?

    Hey helpsusanplease,
    Thanks for the question. I understand you are experiencing issues with mail on your iPhone. The following article may help to resolve your issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Try these basic troubleshooting steps first
    1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.
              - Try to use an alternate Internet connection if available:
                        1. Try a different Wi-Fi connection
                        2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
                        3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
    2. Log in to your email provider's website to ensure that the account is active and the password is correct.
    3. Restart your iOS device.
    4. Delete the affected email account from your device.
              - Tap Settings > Mail, Contacts, Calendars.
              - Choose the affected email account, then tap Delete Account.
              - Add your account again.
    * If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    Thanks,
    Matt M.

  • I get a message the message " Can not get mail. Not connected to server" Yet I am connected with Wi-fi and can access all other websites. Can you advise? My iPad is only a month old!

    Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
    Thx
    Agnes

    Hey agnesfromcopenhagen k,
    Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Thanks,
    Matt M.

  • The Apps panel of my Creative Cloud does not load. How can I get it to load?

    I recently downloaded Creative Cloud to try Dreamweaver, however, the Apps panel of my Creative Cloud does not load.  I've tried restarting the laptop, opening and closing the application, etc. How can I get it to load? I use a MacBook Pro OS X Version 10.9.5.

    Computer died need code can you please post a screen shot of the error message.  The current released version is 1.8.0.447.  The release notes for the Creative Cloud Desktop application can be found at Creative Cloud Help | Creative Cloud app for desktop | Release Notes.

  • Can't get Mail working properly

    I just got my new MacPro this week, and it's really great except for I can't get Mail working right. I've set up my accounts and a few emails come through, though not many, and because it's been a week since I've been online, there should be many more than that. Also, I can't send any emails at all, no matter what I do. They will eventually go into my Sent box, but I've been sending them to myself to see if it's working, and they never come through. I spent an hour on the phone yesterday with the tech support for my ISP, and they told me that I'd have to talk to the Apple techs because they didn't have current info for *Mail 3.1*, the version I have, that the latest they had was for 2.something. So I called the Apple tech support and spent 2 hours on the phone with them, and they weren't able to help me get it going correctly either. It keeps giving me error messages such as Connection Failed, or Unable to Receive Mail, saying "there may be a problem with the mail server or network" and that "the connection to the server on ... port has timed out." I'm on DSL and am always online, so I know it's not the internet connection that's the problem. Can anybody give me some advice on what I should try? Any help will be gratefully appreciated!

    Is your ISP Verizon, Demon, or Glocalnet, then it might be Apples biggest Leopard Bug in conjunction with these ISP:s POP-servers.
    The one that randomly changes the settings in "advanced" from "password" to "APOP".
    The visual result of this bug is that you will get a popup-box where Mail asks you to enter your password. (Which is useless entering, since the preference settings are changed.)
    My advice counts only when you are supposed to use "password" as the correct setting in "Advanced" and in conjunction with some ISP:s.
    Michael

  • Can't get Mail to work - I get the spinning wheel and Mail freezes.  I have to Force Quit it.  How do I fix this?

    Can't get Mail to work - I get the spinning wheel and Mail freezes.  I have to Force Quit Mail .  How do I fix this problem?

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • After installing IOS 5 can't get mail to work...

    I have been having trouble installing IOS 5 on my Ipad and part of the problem may have been with my home computer... In any event, I finally was able to get it on but the result is a bit discouraging. All my apps are there, but I lost everything on them... not that there was much... but my main concern is that I can't get Mail to work... I go in settings and when I click on mail... it just goes back to the page with all the icons... I have tried reinitializing and all... but nothing works... Any idea what is the issue and how to fix it ?

    First try rebooting your iPad.  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.  If that does not help, you may need to restore your iPad in iTunes.  You can restore from a backup (assuming you have a backup to restore from).

  • How can I get Mail to capitalise the first letter of a sentence?

    Hello all,
    this is my first time using apple Support Community.  i am a new apple user and have just got my first MacBookPro (its wonderful).  however, i am having some difficulties. 
    How can i get Mail to capitalize the first letter of a sentence and also capitalize 'i' as 'I' automatically?
    Also, how can i get apps like Pages to do the same? and for that matter typing into internet sites like this one? look at the lack of automatic punctuation!!
    Thank you all for any advice and tips you may have. 
    Paul.

    I don't think whether it's easier or not is really an issue.  The problem is that all of these wonderful technologies are taking away our understanding of how to communicate in writing.  It's not a matter of being lazy and not "wanting" to do it, but rather getting to a point where many people "can't" do it.
    I certainly wasn't pointing any fingers.  I use a calculator (or computer if I happen to be on one at the time) to do the most basic math calculations.  I can be out to lunch with co-workers and we have to pull out a calculator to split a bill 4 ways.  I went through school at a time when calculators were not permitted.  So, at one time, I could have easily done all of that stuff in my head.  So far as math goes, my mind has turned to mush a long time ago.  I doubt I could work my way through a long division problem at this point... even if I sat there and really tried.
    Computers were not generally consumer items when I was growing up.  So I didn't grow up in a world with spell checking.  I have certainly grown to use it though and I'm sure my ability to spell properly has diminished somewhat because of it.  I tend to be less careful when typing something out.  If I'm not sure of the spelling on something, I just let my computer either fix it or give me a suggestion for the corrected spelling.  Fortunately, I grew up having to rely on my own ability to spell, so with that foundation, I tend to do fairly well when it comes to spelling.
    We're at a point now where systems can correct grammar and sentence structure.  I think all of these are great tools to help us out, but they shouldn't be used to take the place of actually knowing how to do things.  Having said that, I'm fairly sure that is exactly what will happen.  Just as today, I rely almost entirely on some form of electronics for everyday math, I'm sure people growing up today with expert systems able to correct everything will rely on those equally.

  • How can I get mail to address addressees by their first name, first?

    I like it that Mail is integrated with Contacts. But when I type a name in the To: section, it is always shown as last name, first name. How can I get Mail to address my friends as Gary Smith, not Smith Gary??

    I don't think whether it's easier or not is really an issue.  The problem is that all of these wonderful technologies are taking away our understanding of how to communicate in writing.  It's not a matter of being lazy and not "wanting" to do it, but rather getting to a point where many people "can't" do it.
    I certainly wasn't pointing any fingers.  I use a calculator (or computer if I happen to be on one at the time) to do the most basic math calculations.  I can be out to lunch with co-workers and we have to pull out a calculator to split a bill 4 ways.  I went through school at a time when calculators were not permitted.  So, at one time, I could have easily done all of that stuff in my head.  So far as math goes, my mind has turned to mush a long time ago.  I doubt I could work my way through a long division problem at this point... even if I sat there and really tried.
    Computers were not generally consumer items when I was growing up.  So I didn't grow up in a world with spell checking.  I have certainly grown to use it though and I'm sure my ability to spell properly has diminished somewhat because of it.  I tend to be less careful when typing something out.  If I'm not sure of the spelling on something, I just let my computer either fix it or give me a suggestion for the corrected spelling.  Fortunately, I grew up having to rely on my own ability to spell, so with that foundation, I tend to do fairly well when it comes to spelling.
    We're at a point now where systems can correct grammar and sentence structure.  I think all of these are great tools to help us out, but they shouldn't be used to take the place of actually knowing how to do things.  Having said that, I'm fairly sure that is exactly what will happen.  Just as today, I rely almost entirely on some form of electronics for everyday math, I'm sure people growing up today with expert systems able to correct everything will rely on those equally.

  • Can't get X11 to load, hard crashes with Geforce 8200M

    I can't get Xwindows to load on a new laptop I recently got. Ubuntu Live 64bit works fine, even can install the NVIDIA drivers and get 3D support on it (tested this before I purchased the laptop). So in Arch Linux (64bit) I downloaded the main NVIDIA driver package, module loads fine. When I try to start Xwindows, I get a "bus error" as regular user. When I try root, my machine crashes hard (can't even toggle CAPS lock). I can't even load Xwindows with the VESA driver, it complains about MTRR not matching correctly.
    Specs on the machine can be found here: http://h10025.www1.hp.com/ewfrf/wc/docu … ct=3860070
    Any help would be greatly appreciated. I also tried the 190 beta drivers, same problems occur. I can get any log files if needed later, I don't have immediate access to the machine.
    Thank you in advance,

    scriptmunkee wrote:Not sure if my issue is the same as yours, but I updated to night and had version 185.18.31-1 installed with kernel 2.6.30.4-1. That combination didn't allow Xorg to start properly. I don't get an error at all. I get a failure or a halt when the Nvidia driver attempts to replace the ACPI hotkey events
    Are you able to load it properly using vesa of nv drivers? I can't seem to get mine to load with any driver- it always crashes hard.

  • Can't get FCKeditorAPI to load to validate HTML Editor contents

    I have an HTML Editor item on my page and wanted to quickly check the length of the text in the editor before submitting the page. It should be possible to get the contents of the HTML Editor using the FCKeditorAPI, but I can't get it to load. I'm doing this by putting basically this in the HTML header:
    <script type="text/javascript">
    function checkLength() {
    var oEditor = FCKeditorAPI.GetInstance('MY_EDITOR');
    alert(oEditor.GetXHTML.length);
    </script>
    Then calling the function when the Save button is clicked. I'm only geting "FCKeditorAPI is not defined" errors, however.

    Hi,
    I have the same problem, because I want to check the number of characters in the editor field before the values are stored.
    And when I tried to get the value of the fckeditor field with document.getElementById(XXX).value; I don`t get the actual value.
    So I have to get the value through the instance of the fckeditor.
    Thanks for your help,
    Tim

  • My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

    My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • How can I get Mail to stop automatically opening on startup of my MacBook?

    How can I get Mail to stop automatically opening on startup of my MacBook Pro? It's not in my startup items folder. But it auto-opens every time I boot up

    In System Preferences / General make sure the Restore Windows ...... is unchecked.
    Also uncheck in the shutdown dialog box

  • How can I get Mail to 'forget' old email addresses?

    Several work contacts have recently changed their email addresses, but when I type their names in the To: box in Mail, it brings up both the new and old addresses.
    None of these email addresses are in my Address Book, Mail is obviously just picking them up from previous emails I have sent and received  to/from these people.
    How can I get Mail to 'forget' these old email addresses and just bring up the current ones?
    (I have already accidentally sent emails to the old addresses because they are coming up in the drop-down menu. I would much prefer it to be idiot-proof and not bring the out of date addresses up at all)

  • How can I get Mail for Exchange on my 6720 classic...

    The manual says that Mail for Exchange is pre-installed. Yet, I cannot find it where the manual tells it's supposed to be. I updated to the latest fimware version a couple of months ago. So I cannot remember whether Mail for Exchange has been pre-installed before. At the OVi Store Mail for Exchange is not available for the 6720c.
    How the heck can I get Mail for Exchange on my phone?

    The iWork apps for a Mac and for iOS devices are different, they are different operating systems.
    If your iPad was activated after 1st September 2013 (and you are using the same account that was used to activate the iPad) then you should be able to download the apps for free in its App Store app. If it was activate before that date (or you are not using the same account) then you will need to pay to download the apps.

Maybe you are looking for

  • Form on a view

    Hello, I created a view on a remote database. This view contains a calculated column. I created a tabular form based on the view. When I try to cheange and update a record I receive the following message: Error      Unable to process update. Error in

  • Error at connect :Requested registry access is not allowed

    I have a Windows service running as a domain admin connecting with Client 10.2.0.100. My connection string look as follows : user id=xxx;data source=xxx;password=xxx;Statement Cache Size=30;Min Pool size=0 This error (Requested registry access is not

  • BT connection fail while connecting to Pc

    Hi fren, i hv nokia 6275 handset and haveing Reliance connection as operator.whrn my phone its new its working fine..and i am useing the same as a modem my connectivity via bluetooth..its working nicely 2-3 month after some time i am nt able to user

  • Eyedropper tool picks up wrong color

    In Flash CC. It seems as though it's offset too far as it does not pick up the corre t color. Ive seen some talk of this here but for Mac. There seems to be nothing about Windows 8. How do I fix this? Without an eyedropper tool my Flash CC is relativ

  • ADF faces:pass parameter from TextInput to LOV view object

    Txt1----- LOV1 Txt2----- LOV2 This case it's happen in the Create Mode LOV2 depend on Txt1 value for make filtration on the LOV2 View Object I use HttpSession for that, but in create mode it pass nothing in HttpSession How can I solve it?