Can't get make a connection in a different network
At home ( in my network) IChat works perfect with two computers.
When one is in an other network it does not work anymore.
I have allready opent port 5060, 16384-16403, but that did not help.
Is there anyone who can help me, or is it something that is not good with the provider?
(if possible please answer in Dutch, because my English is not very good)
If not, I'll try to read it.
Gr
Frans
hi Frans,
Nope. It is just one way of connecting on the same LAN (home network) by not using the AIM servers and night have explained your success before opening ports in your modem.
10:15 PM Sunday; December 24, 2006
Similar Messages
-
I just purchased a new iPhone 5 and I can't get it to connect to my home network, which is ATT U-verse. Can someone help me?
Apps and music aren't part of the backup. App data is http://support.apple.com/kb/HT4946
-
How can I get airport to connect automatically to wireless network?
I temporarily switched from a DSL internet provider to a cable provider, and then back to my old DSL Internet provider. My g5 iMac computer connects to the network through a wireless Belkin router.
Since I switched Internet providers, every time I turn on my computer, it no longer automatically connects into the wireless network. Instead, to connect I now have to manually select the network.
I'd really appreciate tips on automating this step. My kids use this computer and due to parental restrictions, they do not have rights to connect to the network.Hi there,
Strictly speaking changing how the internet is coming into the wireless router should not affect the wireless and how machines connect to it, but however to get you out of a hole I would say create a new Location for your home and start again.
Basically,Disable your wireless first, then in your network settings there is a drop down box at the top of the panel where you can change and create new locations. Create a new one, then select it and click Apply. Now enable your airport and connect to the wireless, once that is done you should be good to go.
Hope that helps,
Callaghan001 -
I can't get a database connection.
Background: I've already built two sites with databases using DW CS6, PHPMySQL, and the same hosting company, so I know they allow remote connections. (I'm developing using the remote host because I've never found a tutorial for how to move it all from local XAMPP to my host - but hey, it's been working fine so far.)
I set up the database using CPanel Databases, added the user and password, no problem. Went into PHP MySQL and added a table, logged out and back in, the table is there as defined.
In DW, I double-checked the testing server, tested the connection, and it connected successfully.
Then I opened a page for editing and added a database connection (all as I had done on the previous two sites that work fine). I named the connection, entered the user, the password and tried to SELECT a database. No luck. HTTP Error 404. I manually added the database (the only one) and clicked test. Again no luck. HPPT Error 404.
I double checked the testing server, double checked the DB information, and nothing seems to work.
Any clue what I'm doing wrong? Thanks so much if you can help.UPDATE:
Okay, this is really getting weird. As a typcial computer nerd, I know there are many roads to success, so if one doesn't work, try another.
Trying a different solution, I opened a test.php page and wrote the following code:
<?php
echo "<p>Now testing database connection.</p>\n";
$db_server = "localhost";
$db_username = "mcsb831_mbradmin";
$db_password = "***(redacted)***";
$link = mysql_connect($db_server, $db_username, $db_password);
if (!$link) {
echo "Could NOT connect.<br />\n";
}else{
echo "Connected Successfully.<br />\n";
mysql_close($link);
I loaded the page to the server and guess what? I got the message "Connected Successfully."
Hooray! Now I know the database server is running, and the database and user name and password are valid.
I went to the DW MbrConnect01.php file (the name of the CONNECTION file that Dreamweaver creates when I tried to make the connection through DW), and verified the database name, user name, and password were correct -- I copied and pasted them from the code above to make absolutely certain there were no transcription errors. Here's that file:
<?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_MbrConnec01 = "localhost";
$database_MbrConnec01 = "mcsb831_members";
$username_MbrConnec01 = "mcsb831_mbradmin";
$password_MbrConnec01 = "***(redacted)***";
$MbrConnec01 = mysql_pconnect($hostname_MbrConnec01, $username_MbrConnec01, $password_MbrConnec01) or trigger_error(mysql_error(),E_USER_ERROR);
?>
And guess what?
I GOT THE STINKING ERROR MESSAGE AGAIN!!
(See previous post for the full text of the message.
Yes, I checked the server using an FTP browser for the presence of the required files, and they are there.
Does anyone have a clue what's going on here? I would absolutely love to use DW's DB automation tools, but none of them will work if I can't get a DW connection to work.
I notice that my code uses mysql_connect while the DW-generated code uses mysql_pconnect (which is deprecated), could that be the culprit? How do I fix it if so?
PLEASE, can someone help? -
i bought an ipod touch and i got itunes downloaded on my computer but can't get it to connect to ipod because it is locked it was locked when i bought it how can i get it unlocked?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Can't get printer to connect to my Galaxy Note3
I can't setup my hp2540 printer to my Galaxy Note3
Hi alBorderp, welcome to the HP Forums. Your Deskjet 2540 is supported to work with the 'HP All-in-One Printer Remote' app. First you would need to get the printer installed wirelessly on your home router, or using Wireless Direct. Step one of this document shows you how to enable Wireless Direct if you wish to just communicate directly to the printer from your Tablet: Printing from an Apple or Android Mobile Device with HP Wireless Direct
Once your printer is available Wirelessly, you can install the 'HP All-in-One Printer Remote' app. After it is installed, you can tell your tablet to connect to the same network that the printer is on. If you are on your home router, make sure the tablet connects to the 2.4ghz network, as the printer cannot connect to the 5.0ghz network.
Here is an FAQ on the app in question: HP All-in-One Printer Remote Mobile App FAQs
Let me know if you have any difficulties, I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Can't get printer to connect to computers
I have an HP Photosmart 5512 all-in-one printer and I"m trying to get it to connnect to my computers in my home. I have a HP 2000 laptop running windows 7. I have tried all the trouble shooting software the company provides, I have unplugged and waited on router and printer. I uninstalled and reinstalled software on computer and printer. I have tried everything the company site has to offer to get this printer connected. I have even called the customer support and they won't help me even though I"m using their products, because its been a couple of years. So if there are any techs on here who know anything about this, please help. I'm about ready to throw it out the window. Its new, I only used it once a couple of years ago and put it back in the box. Now I need it for college and I can't get it to connect. Help Please.
Make and model number of modem?
Make and model number of router?
Computers connected via wire or wireless?
OS of computers?
Please detail all steps you have done to troubleshoot the issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
hey my lil brother just got an ipod touch and its saying connect to itunes and its plugged into my computer and im at the itunes website but i can't get it to connect can anyone HELP ME??!! my mom said that she wants his ipod to be connected so that its on my itunes account so i can see if he buys anything.
PLEASE HELP ME !!!
~MaddieiOS: Device not recognized in iTunes for Windows
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar -
I just brought my IPad home but can't get it to connect to my MIFI. The MIFI is on and working as it's sending a signal to my IMac. How do I get it to recognize the MIFI so I can go online with my IPad?
Does your iPad see you network? If no, are you broadcasting its SSID?
-
I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?
Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.
-
Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.
Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon, -
How can I get an automatic connection to wifi on startup?
We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?
An 'uninterruptible power supply' that automatically steps in and takes your computer
off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
a certain degree, depending on model and should there be a valid reason to do so.
An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
for less than a replacement logic board or an hour of authorized Apple repair, the UPS
is a fairly good investment. Backup battery is user-replaceable in the better made units.
Most of them offer extra ports that do not use the battery-backup power feature. If you
need to have more items run when the power switches up/down or out, you'd need to
consider a larger capacity backup power unit. In some instances, the makers of these
(for a time, perhaps even now) did caution users to not install more than one UPS per
room when the same leg may have inadequate grounding, since these can dump the
excess surge power from several different UPS units and overload the ground.
That said, the gamble is yours. I've found to have and use these is some protection
and when away from the computer. Most settings for controlling them appear in OS X.
No additional software is required. Other settings may be on the UPS front panel.
Good luck & happy computing! -
Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?
Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule -
I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.
You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.
Maybe you are looking for
-
Problem deploying a web application (war)
Hello, I am having a problem deploying a web application in Tomcat. Here is what happens: -I copied the war file into the webapps directory. -I started Tomcat. -Tomcat automatically expanded the war file into a directory of the same name. The problem
-
Hello people! I just had a project refuse to save any changes I made in the mixer (add new busses etc). From nowhere, I was given the "index error in bin" message, and also "minor change of project data has taken place". There is an archived discussi
-
Hey All, I am having an issue where PDF output on a bar chart report does not fill correctly on the first 15 or so pages. After that it draws the charts correctly. Here is what the first 15 look like, various colors are missing in the bars and in the
-
Can anyone explain what this piece of code is and what it does? $currentPage = $_SERVER["PHP_SELF"]; Code put in by Dreamweaver Thanks
-
For some reason, after I downloaded Adobe Flashplayer I have no sound on my PC. Can you help me
I have a new computer. Until yesterday I had sound. I need to know how to fix this. I did download Adope Flash Player yesterday, could that be the problem?