Can't get Maps to work in Calendar
Can't get Maps to work in Calendar.
Add a new appointment and put in an address in 'location' but I never get the option to see a map in the event. Further, the 'travel time' is not calculating, nor is weather imbedded in the event.
Any thoughts?
neil
Just realized that you cannot do this pasting in an address. You have to type it in and then it will pull up the map.
Further if the even is mailed to you as an event it doesn't appear to pick up the address either. Only if you type it in.
half way there!
Similar Messages
-
HT4623 I can't get maps to work for me - I can't get past the first step!
The only options I have are overview or end. I've tried swiping from right to left and left to right on the green box at the top... Nada
My guess is you're in a country that does not yet support turn-by-turn.
Here's a list of which countries support which iOS 6 features:
http://www.apple.com/ios/feature-availability/ -
I can't get my subscribed work calendar to show up on iCloud. I have deleted it and re-added it. I have made sure that the location is set to iCloud. Ideas?
Apple have not announced any such plans. It was the same during the whole MobileMe period from 2008 - 2012, so it doesn't seem to be a high priority issue for Apple.
Send feedback here: http://www.apple.com/feedback/icloud.html -
I have a go daddy email account and I can't get it to work on my iPad
I have a go daddy email account and I can't get it to work on my iPad
Try turning the email account off and then turn it on again. Settings>Mail, Contacts, Calendars>select your gmail account>Off. Go to the mail app and then come back to the account in the settings and turn it on again.
If you can't find any other way for the iPad to accept the password, delete the email account and then add it back onto the iPad. -
The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
I have a personal email calendar kept on Outlook 2010, I also have an Exchange calender on Outlook. I want to sync both calendars with my Iphone 5 / 6.1.2 but ITunes only sees the exchange calendar.
How can I get Itunes to see both calendars?Hi,
you don't need MobileMe or anything fancy. I personally sync my Outlook calendar and my Outlook address book with three computers (two at the office and one at home)and besides I run Office 2003 on one, Office 2007 on the other and Office 2010 on the third, so it can't get more complicated than that, but it works 100%.
First sync Outlook with iTunes on one computer, having done that when you try to sync it to another machine, iTunes will recognize that it is synced with another computer and ask you if you want to merge the data, say yes, That's all there is to it.
It does not work for music as you rightly say but as far as Calendars and Contacts are concerned it's flawless and transparent.
If you hit a snag talk back to me.
Cheers. -
I updated my OS from 10.6.4., to 10.8.2. I want to buy iDVD and iMovie, but I bought iPhoto and can't get it to work yet. I'm hesitant to buy the others without now having the original applications on my laptop. Do I need to buy the older versions first? They are probably on my Snow Leopard install disc, but I am now running Mt Lion that I bought, and downloaded a few days ago...so I don't want to insert the old OS disc, thinking it might want to reinstall the old OS... Thanks,
KathyH-PDownload iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
Excellent tutorial but can't get it to work
Hello
Hope someone can help. I've ben looking for a good calendar
nugget since the demise of mxKalendar
The adobe tutorial on blogs has an excellent example of a
nugget
http://www.adobe.com/devnet/dreamweaver/articles/php_blog3_03.html
but I can't get it to work
It gives a parameter error on the page month forward function
$calendar .="<td><a
href=day.php?m=$mn2&y=$yn2&d=$day>></a></td></tr>";
Has anyone been able to get it to work?
Any help/guidance appreciated
ThanksCliveHave you compared your code to the code in the example files?
http://www.adobe.com/devnet/dreamweaver/articles/php_blog3.html
http://download.macromedia.com/pub/developer/blog3_sample.zip
Ken Ford
Adobe Community Expert - Dreamweaver
Fordwebs, LLC
http://www.fordwebs.com
"Clive" <[email protected]> wrote in message
news:fruiu3$7u4$[email protected]..
> Hello
> Hope someone can help. I've ben looking for a good
calendar nugget since
> the
> demise of mxKalendar
> The adobe tutorial on blogs has an excellent example of
a nugget
>
http://www.adobe.com/devnet/dreamweaver/articles/php_blog3_03.html
> but I can't get it to work
>
> It gives a parameter error on the page month forward
function
>
> $calendar .="<td><a
href=day.php?m=$mn2&y=$yn2&d=$day>></a></td></tr>";
>
> Has anyone been able to get it to work?
> Any help/guidance appreciated
> ThanksClive
>
> -
I purchased a MyBook Studio 4gb external hard drive. I can't get it to work properly. WD have assessed it and say its fine and that the problem is with Apple? Any ideas?
Hello EucaBlue!
So in Disk Utility, with the external harddrive selected, go to the Partition tab, and then under "Partition Layout:" select 1 Partition.
After than, verify that it is formatting the drive as "Mac OS Extended (Journaled) under "Partition Information"
Also verify that it's using using the GUID Partition Map under the Options button at the lower left of this window.
Then click apply and confirm that you want to format the drive. It will ask you if you're sure, and probably for an Administrator password.
Once your harddrive is formatted properly, you should be able to use Time Machine, or any other Mac backup software.
Happy tinkering!
Paul -
I'm relatively new to Fireworks. I created a small image map, but when I try to export the image and html to Dreamweaver, I get a message a message saying "Could not complete your request - The file was not found." I've tried Export, Export Wizard, rebooting, and a bunch of other stuff - but still can't get it to work. I'm using the Trial version (but it's the same as the regular version, right?) on a Mac running SnowLeopard.
Other than this, and an issue with the Text function that I posted about in a different thread, I like Fireworks a lot and was planning to buy it - so I hope there's a way to get Export to work with images/html so it won't be a showstopper. I'm assuming I must be doing something wrong.
Thanks.Linda, thanks for responding to my question.
Unfortunately, I'm unable to upload the file to you. Everything I try gives the "file not found" message (but the file is right there on my screen, in front of me as I'm getting this message), so I don't know how to get it to you. The only way that I've found to get the file "out" of Fireworks is to save it as a .jpg file (which of course eliminates the "hotspots" and associated html), and then open it in Mac's Preview utility and also in Dreamweaver. I could send you the .jpg file if you'd like, but since it no longer contains the hotspots and there's no html, I'm not sure that's too useful.
I tried adding the clickable hotspots back in with Dreamweaver, and that worked and also produced usable html.
I noted in a separate forum message that the Text function has also stopped working for me, although it was fine initially. However, I can no longer add text, and when I try to edit existing text, the existing text disappears from my image.
Has my copy of Fireworks somehow become corrupted? Should I reinstall? Other than these issues, I like the product a lot and would like to be able to use it.
Thanks! -
Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor MarkPort Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course. -
Can't get mic to work on Acer TravelMate P
Hello there Arch forum.
@mod
I'm not sure if this post is best placed in laptop/media or newbie corner, I have used Arch for 2 years now but I'm a noob on pulseaudio.
Feel free to move it to the desired location.
Anyone have any suggestions on how to get my head set microphone to work in mumble on my Acer TravelMate P laptop.
I have tried different things that was suggested on the PulseAuido Troubleshooting page.
But I think its a problem with a hardware button that can mute the microphone located just beneath the screen.
When press the button nothing happens..
Output of some commands.
$ arecord --list-devices
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ pacmd list-sources
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: front-left: 69160 / 106% / 1.40 dB, front-right: 69160 / 106% / 1.40 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_03.0>
module: 6
properties:
device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xb0630000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0a0c"
device.product.name = "Haswell-ULT HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0634000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 2
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: front-left: 41353 / 63% / -12.00 dB, front-right: 41353 / 63% / -12.00 dB
balance 0.00
base volume: 5206 / 8% / -66.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC282 Analog"
alsa.id = "ALC282 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0634000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC282"
alsa.components = "HDA:10ec0282,1025081e,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-internal-mic>
Thanks in advanceRe: Can't get Mic to work? I'm using the Steelseries Siberias headset, with a standalone Zalman mic. I never unplugged them, I only reformatted from a cracked verion of Windows 7, to a legit version of Windows 7. The versions were actually the exact same, and now I regreat Formatting.
Here are some of My PC's Specs
http://img9.imageshack.us/i/specsq.png/
I'm using the ATI Radeon 4870
Creative XtremeGamer
http://img704.imageshack.us/i/sound.png/
http://img684.imageshack.us/i/drivers.png/
I've just gottren really frusterated. I'm about ready to go back down to XP just to get this to work, I use my microphone for so many different things.
I've searched this problem, it seems there are numerous people with the same problems, and I just find that sad, I've been using creative products for a long time now, and have never had a problem like this before. -
Can´t configure secondary e-mail. That is I have the icloud account and earlier bought an account för my wife. Now she can´t get it to work. Where the h--l do I configure this?
Welcome to the Apple community.
If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars. -
All,
I am trying to configure simple load balancing to 4 servers on a ACE (ver 3.0.0A13B), but I can't get it to work.
See config below. I have L3 vlan interfaces on my Cat6513 for vlan 22, 29 and 121.
Can anyone spot the issue?
Thanks, Pieter-Jon
probe tcp TCP
description TCP PROBE
interval 2
faildetect 2
passdetect interval 2
connection term forced
open 2
parameter-map type connection IDLE
set timeout inactivity 600
rserver host INFO-Realserver-1
ip address 38.22.175.1
probe TCP
inservice
rserver host INFO-Realserver-2
ip address 38.22.175.2
probe TCP
inservice
rserver host INFO-Realserver-3
ip address 38.22.175.3
probe TCP
inservice
rserver host INFO-Realserver-4
ip address 38.22.175.4
probe TCP
inservice
serverfarm host INFO2008
predictor leastconns slowstart 15
probe TCP
rserver INFO-Realserver-1
inservice
rserver INFO-Realserver-2
inservice
rserver INFO-Realserver-3
inservice
rserver INFO-Realserver-4
inservice
class-map match-all L4_VIP_ADDRESS_CLASS
2 match virtual-address 38.29.250.250 tcp any
class-map type management match-any MGMT-Class
2 match protocol icmp any
3 match protocol ssh any
4 match protocol telnet any
class-map type management match-all SNMP_ALLOW_CLASS
2 match protocol snmp any
class-map type management match-all TELNET_ALLOW_ALL
2 match protocol telnet any
policy-map type management first-match MGMT-Policy
class MGMT-Class
permit
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class TELNET_ALLOW_ALL
permit
policy-map type management first-match SNMP_ALLOW_POLICY
class SNMP_ALLOW_CLASS
permit
policy-map type loadbalance first-match L7_VIP_LB_ORDER_POLICY
class class-default
serverfarm INFO2008
policy-map multi-match L4_LB_VIP_POLICY
class L4_VIP_ADDRESS_CLASS
loadbalance vip inservice
loadbalance policy L7_VIP_LB_ORDER_POLICY
loadbalance vip icmp-reply
loadbalance vip advertise
interface vlan 22
description Info Servers vlan
ip address 38.22.1.250 255.255.0.0
no shutdown
interface vlan 29
description Info Front End vlan
ip address 38.29.1.250 255.255.0.0
service-policy input L4_LB_VIP_POLICY
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface vlan 121
ip address 38.121.6.1 255.255.0.0
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input SNMP_ALLOW_POLICY
no shutdown
ip route 0.0.0.0 0.0.0.0 38.121.1.1> I have L3 vlan interfaces on my Cat6513 for vlan 22, 29 and 121.
That is your problem first of all.
If i get it right from your config.
VLAN 121 is your transfer network / or client side vlan
VLAN 22 and VLAN 29 are Server VLANS?
What you should keep in mind is that you define the server side vlans only on the ACE contexts with L3. You don't define them on the supervisor.
If you use the ACE in routed mode you have to assign networks exclusive to the ace like routing networks to a layer 3 device in your network. If you use those vlans (22,29) on other parts of your net you should subnet them or take another network.
Your setup should look like this.
6513
L3 ~ VLAN 121
L2 ~ VLAN 22,29,121
ACE Module
L3 ~ VLAN 22,29,121
You assign the 3 vlans or any other to a vlan group and assign this group to the ace module.
Create a new context -> assign the vlan 22,29 and 121 to this context.
6513(L3) <-- vlan 121 --> ACE (L3) /Admin Context
6513(L3) <-- vlan 121 --> ACE(L3) / Server Context --> VLAN 22,29
ACE Admin Context (VLAN121)
ACE Server Context (VLAN 121,22,29)
After you have a working L2/L3 setup start troubleshooting the ace config itself. :)
Hope it helps
Roble -
I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel. Also the datafile share which ends in .aplzod is not created in Outlook. The Contacts and Calendar are sent to iCloud (verified on iCloud.com) but the iCloud folders are not created in Outlook in the Contacts and Calendar navigation panes. I get a message toward the end of the sync process indicating that there was an unspecified error. I'm using the newest version of the iCloud Control Panel, the 32 bit version of Outlook 2010, Windows 7 64 bit, an iPhone 3GS, and the latest version of iTunes. Any ideas how to complete the sync process to the end?
Pretty much the same for me: Windows 7 64-bit, Outlook 2010, iCloud Control Panel 1.0.1, iPhone 3GS. Error report at end of setup process is shown below, and has been emailed. Any help please?
Your setup couldn't be started because of an unexpected error.
Error: 0x8004010F: ZebraBootstrap::ActivateDataFile: Could not create msgservice
AppleOutlookDAVConfig version: 3.0.42.0
Windows version (6.1.7601): Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit Local app data directory test: Pass Temp directory test: Pass Outlook version: 14 (14.0.6025.1000), x86 Outlook location (installed): C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE MAPI location: C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
<Not found>
Contents of C:\Windows\system32\mapisvc.inf
[Services]
MSFAX XP=Fax Mail Transport
[Default Services]
MSFAX XP=Fax Mail Transport
[MSFAX XPP]
PR_PROVIDER_DLL_NAME=FXSXP.DLL
PR_RESOURCE_TYPE=MAPI_TRANSPORT_PROVIDER
PR_RESOURCE_FLAGS=STATUS_NO_DEFAULT_STORE
PR_DISPLAY_NAME=Fax Mail Transport
PR_PROVIDER_DISPLAY=Fax Mail Transport
[MSFAX XP]
PR_DISPLAY_NAME=Fax Mail Transport
Providers=MSFAX XPP
PR_SERVICE_DLL_NAME=FXSXP.DLL
PR_SERVICE_SUPPORT_FILES=FXSXP.DLL
PR_SERVICE_ENTRY_NAME=ServiceEntry
PR_RESOURCE_FLAGS=SERVICE_SINGLE_COPY|SERVICE_NO_PRIMARY_IDENTITY
HKLM\Software\Microsoft\Office\14.0\Access\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\OneNote\Outlook Add-in
Message Classes
HKLM\Software\Microsoft\Office\14.0\Outlook
Dataviz
InstallRoot
Namespaces
{0006F017-0000-0000-C000-000000000046}
FolderTypes
{00067800-0000-0000-C000-000000000046}
{00067801-0000-0000-C000-000000000046}
{00067802-0000-0000-C000-000000000046}
{00067803-0000-0000-C000-000000000046}
{00067804-0000-0000-C000-000000000046}
{00067808-0000-0000-C000-000000000046}
{00067828-0000-0000-C000-000000000046}
{00067829-0000-0000-C000-000000000046}
{0006782A-0000-0000-C000-000000000046}
ViewTypes
{00062000-0000-0000-C000-000000000046}
{00062001-0000-0000-C000-000000000046}
{00062002-0000-0000-C000-000000000046}
{00062003-0000-0000-C000-000000000046}
{00062004-0000-0000-C000-000000000046}
{0006F018-0000-0000-C000-000000000046}
FolderTypes
{00067820-0000-0000-C000-000000000046}
{00067821-0000-0000-C000-000000000046}
{00067822-0000-0000-C000-000000000046}
{00067823-0000-0000-C000-000000000046}
ViewTypes
{00062000-0000-0000-C000-000000000046}
{00062001-0000-0000-C000-000000000046}
{00062002-0000-0000-C000-000000000046}
{00062003-0000-0000-C000-000000000046}
{00062004-0000-0000-C000-000000000046}
Operations
1ImportFile
2ExportFile
3ExportDataLink
4ImportVCard
5ImportAccounts
6ImportVcalendar
7ImportRss
8ExportRss
9ImportCFL
ImportEudora
SchedulingInformation
FreeBusySupport
SearchTypes
{00067A00-0000-0000-C000-000000000046}
{00067A01-0000-0000-C000-000000000046}
{00067A02-0000-0000-C000-000000000046}
{00067A03-0000-0000-C000-000000000046}
{00067A04-0000-0000-C000-000000000046}
{00067A08-0000-0000-C000-000000000046}
{00067A10-0000-0000-C000-000000000046}
{00067A11-0000-0000-C000-000000000046}
{00067A20-0000-0000-C000-000000000046}
Setup
UpgradePath
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Office\Outlook
Addins
AccessAddin.DC
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Access
HKLM\Software\Microsoft\Office\14.0\User Settings\Excel_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Excel
HKLM\Software\Microsoft\Office\14.0\User Settings\Misc_SpsOutlookAddin\Create\Software\Microsoft\Office\Outlook
Addins
ColleagueImport.ColleagueImportAddin
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover
Create
Software
Microsoft
Office
14.0
Outlook
AutoDiscover
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Core
Create
Software
Microsoft
Internet Mail and News
Mail
MSDAIPP
Shared Tools
Outlook
Journaling
Conversation
Document
E-mail Message
Fax
Letter
Meeting
Meeting Cancellation
Meeting Request
Meeting Response
Note
Phone Call
Remote Session
Task
Task Request
Task Response
Web Service Providers
FreeBusy
office.microsoft.com
Windows
CurrentVersion
Internet Settings
TemplatePolicies
High
Zones
4
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg
Create
Software
Microsoft
Windows
Shell
Associations
UrlAssociations
mapi
UserChoice
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKLM\Software\Microsoft\Office\14.0\User Settings\PowerPoint_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft PowerPoint
HKLM\Software\Microsoft\Office\14.0\User Settings\Word_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Word
HKLM\Software\Microsoft\Office\8.0\Outlook
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.msi
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.xml
HKLM\Software\Microsoft\Office\Outlook
Addins
Apple.DAV.Addin
BCSAddin.Connect
Groove.OutlookProxyAddIn
Microsoft.VbaAddinForOutlook.1
OneNote.OutlookAddin
OscAddin.Connect
OutlookChangeNotifier.Connect
Search.OutlookToolbar
UmOutlookAddin.FormRegionAddin
AutoConfigDomains
hotmail.*
live.be
LIVE.CA
LIVE.CL
LIVE.CN
LIVE.CO.IN
LIVE.CO.KR
LIVE.CO.UK
LIVE.CO.ZA
LIVE.COM
LIVE.COM.AR
LIVE.COM.AU
LIVE.COM.MX
LIVE.COM.MY
LIVE.COM.PE
LIVE.COM.PK
LIVE.COM.PT
LIVE.COM.SG
LIVE.COM.VE
LIVE.DE
LIVE.DK
LIVE.FR
LIVE.HK
LIVE.IE
live.in
LIVE.IT
LIVE.JP
LIVE.MA
LIVE.NL
LIVE.NO
LIVE.PH
LIVE.RU
LIVE.SE
livemail.com.br
msn.*
msnhotmail.com
tw.live.com
windowslive.com
FormRegions
IPM.Note.Microsoft.Exchange.Fax.UM.CA
IPM.Note.Microsoft.Exchange.Voice
IPM.Note.Microsoft.Exchange.Voice.UM
IPM.Note.Microsoft.Exchange.Voice.UM.CA
IPM.Note.Microsoft.Fax.CA
IPM.Note.Microsoft.Voicemail
IPM.Note.Microsoft.Voicemail.UM
IPM.Note.Microsoft.Voicemail.UM.CA
IPM.Note.Rpmsg.Microsoft.Voicemail.UM
IPM.Note.Rpmsg.Microsoft.Voicemail.UM.CA
Outlook 10 Accounts
Categories
{ED475418-B0D6-11D2-8C3B-00104B2A6676}
{ED475419-B0D6-11D2-8C3B-00104B2A6676}
{ED475420-B0D6-11D2-8C3B-00104B2A6676}
Types
{4DB5CBF0-3B77-4852-BC8E-BB81908861F3}
{ED475411-B0D6-11D2-8C3B-00104B2A6676}
{ED475412-B0D6-11D2-8C3B-00104B2A6676}
{ED475414-B0D6-11D2-8C3B-00104B2A6676}
SocialConnector
SocialProviders
OscAddin.SharePointProvider
HKCU\Software\Microsoft\Office\14.0\Common\HelpViewer\Applications\OUTLOOK
AdditionalCollections
0
1033
HKCU\Software\Microsoft\Office\14.0\Common\Migration\Outlook
HKCU\Software\Microsoft\Office\14.0\Outlook
Addins
AutoDiscover
RedirectServers
Display Types
Balloons
Journal
Message
Office Explorer
Options
Calendar
MSHTML
International
ToDoBar
Perf
RoamingStreamsCache
6BF937902986EF42A5D2882B309351BF
Preferences
Resiliency
DisabledItems
Search
Catalog
Setup
SQM
Today
Folders
UserInfo
HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Core HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKCU\Software\Microsoft\Office\8.0\Outlook
HKCU\Software\Microsoft\Office\Outlook
Addins
AccessAddin.DC
ColleagueImport.ColleagueImportAddin
iTunesAddIn.CalendarHelper
OMI Account Manager
SocialConnector
Maybe you are looking for
-
TS2776 my clander using Icloud by WiFi syncs from Iphone to PC only, no sync from PC to Iphone
When I open an event on Iphone, it syncs with the PC. Openning event on PC doesn't sync with the Iphone. Thanks, Arye
-
Constantly see the following error message from Adobe Flash Player Installer: Error has been encountered. Close this window and try downloading again. What in heck does that error message mean? This message occurs most of the time when I try to updat
-
Not able to Update the Infotype thro'HCM Process and Forms
Hi, I have done the form and ran the test run in ECC, after completion of execution its not updating the form scenario infotype. Herewith mentioned the trace data .. C Function Trace Record Date : 27.08.2010 Time : 17:26:30 : 539,203 Work Process : 0
-
Hi I got this error: The following translators were not loaded due to errors: WAVT-CFTrans.htm: has configuration information that is invalid. and I can not select browser for preview my pages. pls. help
-
Quiero restaurar mi ipad con copia de sgur. como lo hago?
quiero restaurar mi ipad con copia de sgur. como lo hago?