Can't get margins to print correct

I have created a newsletter, and it appears to fill 8 1/2 x 11 page on screen with normal margins but when I print it is shrinking text and printing with 2 inch margins on top, bottom & left. My printer margins are configured correctly - what next?

Hey,
Turning off "Comments" will fix the problem you are experiencing. Simply go to "view" ... "Hide comments" and your document will print correctly.
Amanda

Similar Messages

  • Can't get iPhoto to print correct size photo

    I have iPhoto 09.   I have two 4 x 6 photos I want to print, one on top of the other, with a 1 1/4 outside border all around and a 1/2 space in between them.  I'm printing on an 8 1/2 x 11 piece of photo paper.
    I did this several months ago and it worked fine.  Now I'm trying to print the same arrangement, but can't get the sizing right.  I don't remember exactly how I constructed the above layout but assumed that I printed it as a two-photo contact sheet.  But now when I do it that way, the photos end up cropped and approximately 3 1/2 x 5 1/2 (instead of 4 x 6) and top/bottom borders of 1 3/4 instead of 1 1/4.   The L-R borders are now at 1 1/2 instead of 1 1/4.  The 1/2 space in between them remains correct.
    Can anyone help me figure out what I'm doing wrong?   Thanks. 

    Apply the library repair below:
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot.

  • PDF's print two sided.  How can I get them to print on single pages?

    PDF's print two sided.  There is no option shown.  How can I get thelm to print on single pages?

    1: Go into iTunes.
    2: Right click on the song and choose 'Get Info' (or press cmd+i on a Mac).
    3: In 'Info' change the album name to the one you want it to go into, when you start typeing it should automatically come up.
    4: Check that the disk number and track number is correct.  It should be automatic.
    4: Press OK.
    You should see it go into the album now.

  • I have a Mac Air.. with 10.10 and just purchased a HP laserjet pro M201dw  .. I can't get it to print duplex in pages or word.  In pages not highlighted. does in Adobe for pdf.  Help!

    I have a Mac Air with 10.10 .  Just purchased a HP Laserjet Pro M201dw printer.  I can not get the duplex printing to work in Word or Pages.  It does work for PDF files in Acrobat Pro.  It won't for emails.  In Pages I see two- sided but it is dimmed.  I look at setups and it shows two -sided is off but can't find a way to change this setting.  In the printer setting itself, the duplex box is checked.  Need help.  Did notice the driver only goes up to 10.9 but it says on Apple site of supported printers this one is listed.
    Appreciate help in solving this issue.
    Thanks in advance for anyone willing to give me some time and assistance.
    Fran

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • I can't get anything to print from my ipad mini since I got the new update.  Does anyone know how to remedy this situation?   Thanks.

    I can't get anything to print from my ipad mini since I did the software update.  It recognizes the printer, but nothing happens when I tap print.  Can anyone help with this situation?  Thanks!

    Hi Justinescc,
    The bottom of this article contains some steps you can try if you're unable to AirPrint:
    AirPrint Basics
    http://support.apple.com/kb/HT4356
    Cheers,
    - Ari

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • HT3258 I have a Brother MFC-J4610DW and can't get it to print from my 2012 iMac over my lan.

    I have a Brother MFC-J4610DW and can't get it to print from my 2012 iMac over my lan. It works with the macbook pro and iPad. The dialog box states "Setting up 'BrotherMFC-J4610..." Unable to communicate." I worked with the AppleCare guy for a couple of hours. We got it to print via USB but when we switched to ethernet hook up via Time Capsule it won't communicate or install the printer.

    Try two things (separately, trying to add the printer in Print & Scan/fax prefs after each):
    Reset the printing system:
    http://support.apple.com/kb/ht1341
    Reset the router - power it off for 15 secs, then back on. Some routers cause these kinds of errors - not recognizing devices are present.

  • Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

  • Can't get ipad to print from cannon MG 4250 printer, Can't get ipad to print from cannon MG 4250 printer

    Can't get ipad tp print from my cannon MG4250 printer need help please?

    here is canons guide
    http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/InkJet/PIXMA_MG_series/PIXMA_MG4250.aspx?faqtcmuri=tcm:13-957992&page=1&typ e=faq

  • Where can I get an EPSON printer for the original iMac?

    Where can I get an EPSON printer for the original iMac?

    You should look for an Epson Stylus Color 740 or the higher-end 900 or 980, which are about 12 years old now.  All have USB connectivity, and while the 900/980 is a better/faster printer, it's harder to find the ink tanks for it at the usual office supply stores.  Ink tanks for the 740 series seem to be more readily available, without a special order.  There were Mac versions of these printers (the 740i and 900i), with blue/ice housings that were color-keyed to match the fruit-colored "blueberry" iMac and Blue & White G3 mini-tower.  There was no Epson printer that was color-keyed to the original Bondi Blue iMacs.

  • Can't get iPad to print

    Can't get iPad to print.  Bought new printer for air print.  When tell to print it searches for printer, but always says not printer found

    Hmm, interesting that sites like airprint activator and others have sprung up to support the what seems like a problem with ipad wireless printing....and reading the many discussions here, it seem there is still a big problem between the devices that everyone has a different take on....I'm just glad I don't HAVE to print from my iPad......cause it ain't happened...

  • Photosmart 5510 when sending from ipad2 picture comes out small,can I get it to print full A4 size?

    when printing from my Ipad 2 the picture prints small ,can I get it to print to full A4?

    Hi eleybill,
    Welcome to the HP Consumer Printer Forums!
    Here is an article that explains how to print from an iPad to your printer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang​...=
    To answer your question, in that article it states:
    NOTE: Print options only apply to documents. All photo files print at a default image size of 4 x 6 in (101.6 x 152.4 mm).
    **UPDATE** 04/26/12
    After some testing, I have found if you change the paper size > A4, and Image Size > Custom, then you can pinch to zoom the image to the size of your liking.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • I am running Windows 7 64Bit system and everything was working normal.  However, I am now getting an error message stating objc.dll is missing.  I've re-installed Itunes but to no avail.  How can I get this error message corrected?

    I am running Windows 7 64Bit system and everything was working normal.  However, I am now getting an error message stating objc.dll is missing.  I've re-installed Itunes but to no avail.  How can I get this error message corrected?

    See this User Tip by turingtest2
      https://discussions.apple.com/docs/DOC-6562

  • Music in itunes from different cd's, how can i get it to have correct info?

    1.  I have over 2000 songs in itunes from different mixed cd's, how can I get them to have correct artist and album and titles?
    2.  How can I convert them all to mp3 because I have to be able to send them to windows media player because I have mp3 players that I would like to play these on along with my ipod? 

    I personally use TuneUp from http://www.tuneupmedia.com/
    It works on both Mac and PC.
    It is a great tool for correcting MetaData "Music Info" for all of your songs. It also adds the correct album artwork and can remove duplicate songs from your library easily.
    iTunes on PC will convert the WMA to MP3 for you if you like. To do so just right click on your WMA files in iTunes and choose convert to MP3.
    If you have already moved all of your music to Mac and no longer have a windows machine there are a couple of programs that will do it for you from Mac OS X. Some are free and some cost money. Let me know if you would like to know a couple of examples.

  • How can I get it to print output of inputstream?

    Please forgive me for running two similar thread but the other thread ahs strayed from primal concern of coding.
    Some help with the code please???
    I have set up an inputstream and outputstream to the "ftp process" of java.lang.Runtime I have sent the command "dir" to ftp.
    But How can I get it to print all the files etc of the "dir" sent to ftp process?
    Also I have just read that it is perhaps better to buffer the STREAMS.
    How do I do this for outputsteam? I think I have some clue to do for inputstream with bufferedreader?
    import java.lang.*;
    import java.io.*;
    public class RuntimeFTP{
    public static void main(String[] arg){
    Runtime rt = Runtime.getRuntime();
    String[] callAndArgs = { "ftp.exe", "jaguar.wmin.ac.uk" };
    Process process = null;
    OutputStream os = null;
    InputStream is = null;
    String login = "w0109699";
    String password = "11041976";
    String dircommand = "dir";
    byte[] barraylogin = login.getBytes();
    byte[] barraypassword = password.getBytes();
    byte[] barraydircommand = dircommand.getBytes();
    try
    process = rt.exec(callAndArgs);
    process.waitFor();
    System.out.println("Process exit code is: " + process.exitValue() );
    catch(IOException e)
    System.err.println("IOException starting process!");
    catch(InterruptedException e)
    System.out.println("Interrupted waiting for process!");
    try
    os = process.getOutputStream();
    os.write(barraylogin);
    os.write(barraypassword);
    os.write(barraydircommand);
    catch(IOException io)
    System.out.println("io exception write to outputstream");
    try
    is = process.getInputStream();
    while (is.read() != -1)
    How can I print the data to the user
    i.e all the data obtained from the "dir" command sent to ftp?????????
    catch(IOException io)
    System.out.println("io exception read fron inputstream");

    the above code does not work so I have abondaned it.
    I want to integrate an ftp program into a program I am working on. I have scoured the net for reuse able code and come across a "t or Linlyn ftp program" which claims is easily integrate able into larger applications.
    The problem is did does not seem to work and gives me errors. I would be grateful if someone could tell me why I am getting the error, here is the error:
    C:\My_DL_Dap\ftp in java>appletviewer t.java
    Warning: <applet> tag requires width attribute.
    java.security.AccessControlException: access denied (java.net.SocketPermission j
    aguar.wmin.ac.uk resolve)
    at java.security.AccessControlContext.checkPermission(AccessControlConte
    xt.java:270)
    at java.security.AccessController.checkPermission(AccessController.java:
    401)
    at java.lang.SecurityManager.checkPermission(SecurityManager.java:542)
    at java.lang.SecurityManager.checkConnect(SecurityManager.java:1042)
    at java.net.InetAddress.getAllByName0(InetAddress.java:909)
    at java.net.InetAddress.getAllByName0(InetAddress.java:890)
    at java.net.InetAddress.getAllByName(InetAddress.java:884)
    at java.net.InetAddress.getByName(InetAddress.java:814)
    at java.net.InetSocketAddress.<init>(InetSocketAddress.java:109)
    at java.net.Socket.<init>(Socket.java:118)
    at Linlyn.ftpConnect(t.java:326)
    at Linlyn.<init>(t.java:236)
    at t.init(t.java:83)
    at sun.applet.AppletPanel.run(AppletPanel.java:341)
    at java.lang.Thread.run(Thread.java:536)
    I would also be grateful if someone could try out the program and tell me if it works for them, then I could determine if it is because ftp clients are being blocked by my server. The ftp program is very small, here is the url:
    http://www.afu.com/jdownload.html
    1) compile the code
    2) fill in everywhere it requests "your-server" "username" and "password"
    3) to run appletviewer t.java

Maybe you are looking for