Can't get messages from icloud

I have me.com account and it was working fine, I tried to send and email with a big file attached but it could not send it. After that I delete the message and tried to send a new mail but it is working as it is reading mail but it doesn't do anything and I can't read my mail on my mac. I have Lion 10.7.3

troubleshooting imessage http://support.apple.com/kb/ts2755
about message http://support.apple.com/kb/HT3529

Similar Messages

Got a new Samsung galaxy s3 and can't get messages from iphone users now. Don't have the old iphone to change the settings ! please help . need to know how I can get messages on my galaxy

Can't get messages from iphone users on my new Samsung g allaxy and don't have my old iphone anymore ! Please help !

Read here under no longer have device:
http://support.apple.com/kb/ht5661
Be aware, changing your Apple ID password doesn't always work, & can take up to 45 days to work.
It's either that, or you call AppleCare & have them fix.

Lost my Iphone 4g, hooked up old 3gs, can't get messages from people who have me registered with ichat

Anyone who I had previously used iChat with, can no longer send me texts now that I have had to downgrade back to a 3Gs.
Lost my Iphone 4g, hooked up old 3gs, can't get messages from people who have me registered with ichat.
My carrier (Rogers) says they have nothing they can do about it.
Thanks in advance.

Correction - iMessage, not iChat. Too early....

How can i extract messages from icloud backup in apple 4

how can i extract watsapp messages from icloud backup in apple 4

When you backup messages in iCloud, your SMS will be stored in Network. As i know, you cannot view the SMS. But you can try to sync to your iPhone or backup in iTunes. After that, you can extract your messages from iTunes with iPhone backup Extractor apps.

Can't get photos from iCloud onto iPad since updating

HI guys, not very technical so please bear with me
Basically, I updated my iPad software yesterday and all my photos disappeared. So I shared them all again from my iPhone so they would then go back on to my iPad. This worked at first and then stopped working so some photos are on Ipad but not others, and I cannot figure out why or what to do to get my photos from icloud onto my iPad. Anyone know what is wrong or what I can do to fix it?
thanks in advance for any help

Can anyone help? Basically, any photos I send to iCloud are not going to my iPad now since updating. Would appreciate any advice please.
thanks

Can't get message from mailbox in shell script

I'm using the shell-script workaround for the problem of creating messages from scripts run by a Mail rule. Can't seem to get the syntax right for getting a message passed from the main routine:
Main
<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:800px">using terms from application "Mail"
on perform mail action with messages theMessages
repeat with eachMessage in theMessages
set theID to id of eachMessage
set theBox to name of mailbox of eachMessage
set theAccount to "none"
try
set theAccount to name of account of mailbox of eachMessage
end try
do shell script "osascript Users/dave/Library/Scripts/Applications/Mail/exp.scpt " & theID & " " & theBox & " " & theAccount
end repeat
end perform mail action with messages
end using terms from
using terms from application "Mail"
on run
tell application "Mail" to set sel to selection
tell me to perform mail action with messages (sel)
end run
end using terms from</pre>
Shell
<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:800px">on run TheArgs
using terms from application "Mail"
set theID to item 1 of TheArgs
set theBox to item 2 of TheArgs
set theAccount to item 3 of TheArgs
if theAccount = "none" then
set theMessage to (message of mailbox theBox) whose id is (theID as integer)
else
set theMessage to (message of mailbox theBox of account theAccount) whose id is (theID as integer)
end if</pre>
The conditional is so I can test by selecting messages from either my Inbox or other boxes. Either way, though I get runtime errors like: "Can’t get «class mssg» of «class mbxp» \"INBOX\" of «class mact» \"David\" whose id of it = \"19111\". (-1728)"
I've tried variations, but nothing seems to work.
BTW, how does one view events or results in a shell script? Neither its window nor the main routine's show anything, and even "log" statements in the shell seem to go nowhere.

I think I understand what's going wrong. If I select a message in my Inbox, the shell statement
<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:800px">set theMessage to (message 1 of mailbox theBox of account theAccount) whose id is (theID as integer)</pre>
works. If I select a message from an On My Mac box, though, I can't get theAccount in Main in the first place because there's no account associated with those boxes. That's why I set up the "try" in Main and the conditional in the shell. I see now that
<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:800px">set theBox to name of mailbox of eachMessage</pre>
in Main yields only the name of the box -- any containers it may have are omitted. Therefore,
<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:800px">set theMessage to (message 1 of mailbox theBox) whose id is (theID as integer)</pre>
fails if there are any containers. So, I need a "set theBox" statement in Main that produces a proper path to the message, regardless of where it's located. If I can formulate that, a single "set theMessage" in the shell will suffice, without having worry about whether there's an account. I've experimented with "path to" and will continue casting about, but if the solution is apparent to you, please let me know.
BTW: Echo was a worthwhile "little diversion" for me, because it's led me to a better understanding of what "do shell script" does (i.e., it executes a UNIX command as if it was typed into Terminal) and why it solves the message-creation problem (i.e., it runs the named script as a process that's separate from Mail). I suppose that was obvious to you and many others, but it wasn't to me, despite reading what the AS Language Guide says about it, plus a few Google hits for "osascript." So thank you for that.
One thing I don't understand, though: If I change the command to "echo $1 $2 $3", nothing appears in Terminal. (I can produce files the way you showed just fine.)

Can't get messages from my gmail account to my ipod touch to show up

Hello,
My daughter's ipod touch does not allow her to receive her email messages from her gmail account on the ipod touch. What do I need to do to have this work. It was working before I updated my iphone to icloud. At the time our accounts were linked since them I have seperated our accounts.
SS

This may help:
iPhone, iPad, or iPod touch - Gmail Help

Can't get messages from iPhone user on my android

I have recently swapped my iPhone for an android but still have I pad. I am not receiving messages from friends with I phones. Any ideas?

Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"

HT1296 Can't get photos from icloud & more probs??

1. Some months ago, my husband's phone packed up & he wen't to the istore for a replacement. The guy there said he was able to retreive pictures off the old phone & had put them on icloud. My husband doesn't have an icloud account so the guy somehow put them on mine(don't know how he got into it, without password, etc). We've been unable to find them though & istore was no help, saying we needed icloud on the computer to get it - had WinXP at the time & was unable to do that.
So I've just upgraded to Win7 and still can't work out how to get the photos! It seems now there's just a website for icloud, when I thought previously you had to download a program. On the page it doesn't show photos or videos. Somewhere in my travels I came across an icloud page that showed various 'albums' of mine, which included my husband's lost ones. But I couldn't do anything with it & haven't been able to find it again. How do I get these photos??
2. Also when I look at my contacts in icloud, they're old & include my husband's contacts. Also the calendar has obviously synced & shows current events, with correct days, but with the wrong times!! WTH??
3. Since upgrading computers, when I tried to sync my phone with itunes, it came up that I had to erase my phone, because it is synced with another itunes library(that was on this computer, now no more!) So... been searching for answers today to no avail.
I was able to 'transferred my purchases' from the phone to itunes, but not sync. & then when I plugged it in last time, to press sync & get the exact message to post on a help forum, it didn't give me the message!! No message for a basic sync, it just didn't work. But when I go into the 'tones' & 'music' tabs & click 'sync music' it comes up with 'Do you want to remove existing music...from iphone? Remove & Sync is the only option!!
When I 'authorised' this computer it also said '5 of 5 allowed on the account'. As we have 3 computers & this one obviously has registered as 2(don't know where the 5th one comes in), I figure the next problem will be that we can't authorise the other computers at all!!
So I presume answer to no.3 is in cancelling the accounts for the previous 'library' on this & other computers, but how do you do that??? Presume my husband will have the same problem on his computer, as that's also upgraded to Win7.

Can anyone help? Basically, any photos I send to iCloud are not going to my iPad now since updating. Would appreciate any advice please.
thanks

Help please! I can't get songs from icloud onto my laptop.

Hi, I have had a terrible time with my music and iTunes of late. All of which I am sure is because I have installed and unistalled so many times in the last 3 weeks that
I have created a huge mess. I can see the songs in itunes - (most have been purchased) but when I try to listen to them, put them in a playlist and try to burn a cd- I get a message stating that they are not on my computer. I have been trying to download songs from the icloud to my laptop and I get a message that states:
The file name was invalid or too long. Please check that connection to the network is active and try again.
or
There were problems downloading some purchase items.
Before this whole nightmare began I had added "google drive" to my computer and I think that alot of the files are stored there. When I open the music folder the thread goes on and on.and on.. So frustrated. Can anyone help?
Thanks

I fixed my problem - yours might be different, but it might be the same too . . . My problem was similar to what you described. The hardware connected sound was there but the device seemed to not be recognized. Turned out that it was just running very very very very very slowly (thinking that it was an old as hell Iomega Zip dri've)
The Creative device was using a driver written by Iomega (that was the tip off)
Once I got rid of the Iomega stuff, it works fine.
If you have any slower (older?) mass storage dri'ves - you might try uninstalling them to see if that fixes the problem . . .
good luck

TS1387 Can't get music from icloud onto iphone4--do not have enough permissions

I have an Iphone 4. I am trying to put the music library from my icloud onto my iphone. Had no trouble doing this with my ipad. But, when I try to do this, syncing through my PC (windows 7), I get the message "Jane's Iphone will not sync because you do not have enough access privileges for this operation" It's recommended to delete the "iphone cache" in my picture library, but there is no iphone cache folder in my picture library. Why won't my itunes load to my phone? Why won't my iphone sync? Any ideas? Thanks.

Can anyone help? Basically, any photos I send to iCloud are not going to my iPad now since updating. Would appreciate any advice please.
thanks

HT1923 Trying to remove ITunes so I can reinstall getting message from windows installer /feature that you are trying to use is on a network resource that is unavailable? How do I correct same message when trying to install upgrade.

Message receiving is from windows installer:the feature you are trying to use is on a network resource that is unavailable

Many thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

Cryptography in networking,client can't get message from server but

Hello We are developing a simple Networking project where we are chaining CipherStreams to ObjectStream. When client gets connected to the server the server will send initial message to client and flush (but here is the problem) but the client does not get the message and is waiting for the message input.readObject() it just stuck there, what is the reason??
---Server Code----
server = new ServerSocket( 15000, 100 );
while ( true ) {
connection = server.accept();
connection.setTcpNoDelay(true);
// Get input and output streams.
desEn.init(Cipher.ENCRYPT_MODE, desKey);
//get the raw OutputStream
outraw = connection.getOutputStream();
//chain the OutputStream to the coutDES
CipherOutputStream
CipherOutputStream coutDES = new CipherOutputStream(outraw, desEn);
//chain the coutDES CipherOutputStream to
ObjectOutputStream of output
output = new ObjectOutputStream(coutDES);
String message = "SERVER>>>DES CONNECTION SUCCESSFUL!";
output.writeObject( message );
output.flush();
-End of Server Code--
-- Client code start-
Cipher desEn = Cipher.getInstance("DES"); //encrypting
Cipher Cipher desDe = Cipher.getInstance"DES");
client = new Socket(servername, 15000);
client.setTcpNoDelay(true);
desDe.init(Cipher.DECRYPT_MODE,desKey);
cinDES = new CipherInputStream(inraw, desDe);
input = new ObjectInputStream(cinDES);
// We got stuck here the program don't go beyond this line
Object obj = input.readObject();

Thank you for your suggestion. But I tried to chain the BufferedStream between ObjectStream and CipherStream. The problem still exit.
In the c/s sides, there are two functions to use the socket. One is the protocol part which does the handshaking before everything is prepared. Then a JTextField object is enabled and it will also use the socket and the chained stream to commnicate with the other part.
The concrete problem is strange, it seems there is some hidden buffer which holds the message. When a message is send and flush, it doesn't go to the net, instead it is hold somewhere until an other message is send and flush. So there are some delay. So in my code I have to use sendDate("\n") to push the useful message out into to net. And on the other side, eatBoundary() to get rid of the "\n" and then getMsg() to recieve the useful message.
However, for some time the communiction stuck, both sides are waiting. But when you send another message, the previous and the new message appear on the other side. In the way, it is hard to implement the handshaking which requires reliable syncronization. You have met the same problem before? If you think it is not clear enough could you send me your email addr and I can send you the source code.
my addr; [email protected]
Thanks again!
Best

Can't get messages from certain contacts

Can't send or receive messages to some of my contacts

Hi there Dunlop14,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
-Griff W.

How do how do I get imessages off I have a galaxy now and I need imessages off or I can't get messages from iphone user'sget imessages off I have a galaxy now and I need imessages off or I can't get messages from iphone user's

Plz help

Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"

Can't get messages from icloud

Similar Messages

Maybe you are looking for