Can't get messages to backup using COBRAS Export with Unity Connection 7.x

Hi All,
I am trying to do a message export using COBRAS on Connection 7.1.3, but it errors out saying this...
7/6/2011 12:23:05 PM: ** Testing IMAP connectivity to Connection server for message extraction **
7/6/2011 12:23:06 PM: (error) Failed to connect to remote mailstore with super user IMAP access - unable to backup messages.
IMAP client error=ChilkatLog
    ConnectionType: Unencrypted TCP/IP
    loginResponse: aaab NO Logon failure: unknown user name or bad password.
    Received failed login response from IMAP server
    Failed.
I'm assuming something needs to be configured to allow my System Administrator/Remote Administrator user to access the messages. Any tips on how to get this working would be greatly appreciated.
Thanks,
Garrett

I was able to get this to work. Had to use the original administrator account and not a user with the same roles.
-Garrett

Similar Messages

Can I get iCloud if I use a MacBookPro with Intel Core Duo (not Core 2). I can't upgrade from 10.6.8 to 10.7 without a Core 2.

Can I get iCloud if I use a MacBookPro with Intel Core Duo (not Core 2)? I can't upgrade from 10.6.8 to 10.7 without a Core 2.

Lion (10.7.x) needs Core2Duo.

How can I get a video signal using IMAC 27 with only mini display port. I like to send the signal wireless to a TV using a TV/audio transmit system.

I have an IMAC 27 with a mini display port ( only this). I also have all the adapters ( mini display port to VGA, HDMI...).
Since I moved to UAE I like to transmit the signal frm my IMAC ( where I also look German TV on) to my TV. I will do so by using a wireless Transmit receive system with theree cinch inputs ( transmit system ( video, 2x voice).
The distance to the TV IS ABOUT 10m and one wall. I don`t want to use a cable.
Is there any solution for example mini display to VGA + VGA adapter to cinch so I can use the transmit system?
HDMI would also be an optiekn, bat then I have to by another Transmit receive system.
If somebody made already the experience I would appreciate to share the information
Is there may be any store in UAE where to get support. It is very diificult to get good advice here. They sell everything bat can not reaaly explain and have very often no technical knowledge. With this problem nobody until now can help me.
Hans
<Email Edited by Host>

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Can't get to any websites using Mozilla Firefox with Windows XP

Have installed NoScript and use the icon to allow the individual websites, but I still get the "JavaScript required" notice. If I look with the icon, the website is allowed. Can't reach my Verizon DSL email nor Facebook.

Hey, pizzapie22!
In my experience with NoScript, sometimes even if you allow the main site to load JS, some blocked scripts from different domains prevent content from loading.
Does your NoScript icon have a smaller "No" symbol in its lower-right corner? If it does you may have to allow additional scripts.
Does this help?

Trying to email images can not get past password. using a pc with pse123???

Can not send email with pse13, can't seem to accept my password. how do I change mypassword?

Hi,
In PSE 13, the password required is the password for your mail service provider.
In Edit -> Preferences -> Email, you can change that password.
Are you using a standard service provider (from the drop down list) or have to had to configure the link?
Brian

COBRAS Import for Unity Connection 8.5 and Subscriber LDAP Integration Status

Using COBRAS Import for Unity Connection 1.1 Build 212 with Unity 4.2 Voicemail Only and Connection 8.5(1)SU1 with LDAP Directory Integration
When I run COBRAS the old alias matches the new alias and my desire is for subscribers being moved to be LDAP inegrated. However after COBRAS runs, the radio box for LDAP Integration Status on the subscriber is set to Do Not Integrate with LDAP Directory. Is there a way for COBRAS to select Integrate with LDAP Directory when the alias matches on LDAP?

Hi ben,
If you are just importing from and not authenticating against LDAP, then the PIN comes
from the Connection Template you used to build the users;
Note that no passwords or PINs are copied from the LDAP directory to the Connection database. If
you want Connection users to authenticate against the LDAP directory, see the “LDAP
Authentication” section on page 9-7.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg040.html
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straig

Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straight to my phone instead of my MacBook Pro. Help!!

Any error message?

I've had my IPAD 2 2 mosths and still can't get it to backup.

Thought I'd do this upgrade in itunes. Then upgrade IPAD several hours later Itune updated now I can't get past the backup to do the software upgrade.
I'm thinking I've bought a pieces of Junk for $800.00. No Support!! No Customer service!. Thinking about taking it back! unless their is a fix!
Fustrated MAD & confused! i'VE POSTED B4 AND GOT NO HELP!

You need to post the steps you took, exactly what is happening, what OS version are you running (32 or 63 bit). No one can begin to help you unless we have more information to try and figure out what is happening.
It sounds like you got iTunes to upgrade and are trying to download the ios5 upgrade for your iPad. Correct? First things to try:
1) reboot your pc
2). Turn off firewall and anti-virus
3). Try again and post the results with any error messages you may get.
Good luck

I have an ipod shuffle 1st generation it will work if i connect it to my usb port in car or on computer but i can not get it to work using just headphones what coud be the reason for this

I have an ipod shuffle 1st generation. it will work ousing usb port in car or on computer but i can not get it to play using headphones. what would be the reason for this.

Sorry for the typos, I hope my message still gets across!

Lost my Iphone 4g, hooked up old 3gs, can't get messages from people who have me registered with ichat

Anyone who I had previously used iChat with, can no longer send me texts now that I have had to downgrade back to a 3Gs.
Lost my Iphone 4g, hooked up old 3gs, can't get messages from people who have me registered with ichat.
My carrier (Rogers) says they have nothing they can do about it.
Thanks in advance.

Correction - iMessage, not iChat. Too early....

Applescript for mail error can't get message id

I have an applescript (found on internet) for Mail 4.5 that deletes messages in "on my mac" mailbox "Deleted Inbox" that are older than 120 days. The script runs from an iCal daily event. I drag messages from Inbox to "Deleted Inbox" when I don't want the message in Inbox, but I want to save the message for 120 days before deleting it. The script sometimes runs successfully, and sometimes gives error "Mail got an error: Can't get message id xxx of mailbox "Deleted Inbox"". Then in Mail, I "Mailbox / Rebuild" that mailbox, and run the script manually without error. How can I avoid that error? The script is essentially:
tell application "Mail"
          set OldStuff to every message of mailbox TheBox where date received of it < OldDate
          repeat with ThisMessage in OldStuff
delete ThisMessage
          end repeat
end tell
Thanks for any help.
Ken

How can I avoid that error?
I don't actually know how you can avoid that error. However, maybe you can use a workaround and have the script rebuild the mailboxes automatically when such an error occurs. Try the following code:
tell application "Mail"
try
    set OldStuff to every message of mailbox TheBox where date received of it < OldDate
on error
    activate
    tell application "System Events" to click menu item "Rebuild" of menu 1 of menu bar item "Mailbox" of menu bar 1 of process "Mail"
    delay 1 -- adjust if necessary
    set OldStuff to every message of mailbox TheBox where date received of it < OldDate
end try
repeat with ThisMessage in OldStuff
    delete ThisMessage
end repeat
end tell
Since the above script uses GUI Scripting, you must enable the Accessibility Frameworks by clicking the checkbox labeled "Enable access for assistive devices" in the Universal Access System Preference pane.
Message was edited by: Pierre L.

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

Than how can i get java class by using it's class file?

Hi
After compilation of a java program, it creates a class file.
After getting class file suppose class file has been deleted.
Than how can i get java class by using it's class file?
Thanks in advance.

get a decompiler and run your class file through it--I'll assume you want the source code back and that you are not trying to recover a missing class file by attempting to use the class file that is missing--if it's missing, then I've not a clue on how to get it back by using what is already missing.
BTW: many of your compilers have source control--if it does, just restore your missing file.

How can i get a file header using this method cl_gui_frontend_services= gui

Hi Experts,
How can i get a file header using this method cl_gui_frontend_services=>gui_download
Thanks
Basu

Hi,
You can use the FM - GUI_DOWNLOAD to specify the headers. It can be done in the following manner -
TYPES: BEGIN OF ty_head, "Structure for header
             h(10) TYPE c,
             END OF ty_head.
DATA: it_head TYPE TABLE OF ty_head WITH HEADER LINE.
"Adding header details
it_head-h = 'Field1'.
APPEND it_head.
it_head-h = 'Field2'.
APPEND it_head.
it_head-h = 'Field3'.
APPEND it_head.
it_head-h = 'Field4'.
APPEND it_head.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = p_file
   filetype                        = 'ASC'
   write_field_separator           = 'X'
   header                          = '00' "<= note this
TABLES
    data_tab                        = it_tab
   fieldnames                      = it_head[] "<= Pass your header table here
EXCEPTIONS
   OTHERS                          = 1.
Hope this helps.
Regards,
Himanshu

I can't get yahoo to open using firefox or safari. I just installed updates...then the problems began. gmail is working fine

I can't get yahoomail to open using foxfire or safari. I just installed updates then the problem began. Gmail is working fine

What happens when you try?

Can't get messages to backup using COBRAS Export with Unity Connection 7.x

Similar Messages

Maybe you are looking for