Can't get motion menus with buttons to work

I have a motion menu and when I add buttons, either from text converted or pre defined buttons, and then render the motion menu I get about 10 seconds of menu then no video only audio. I am on CS4 under Windows 7 professional. The video is a .m2v file and the audio is a .wav file. I have also updated to the latest RIXIO program (pxengine4_18_16a.exe) as suggested by another forum entry.

I am not sure what you mean about pre-CS4 elements and "the par changed". On this operating system (win 7) I have never installed any Adobe programs except CS4. I so have adobe reader installed which was not part of the Production Premium CS4 products.
Here is what I did:
1 - Created a new Composition in Ae Preset NTSC D1 Widescreen 30 seconds long
2 - Added text "Test Motion Menu" in red
3 - Animated the text from off screen at the top to off screen at the bottom
4 - Added to the render queue options MPEG2-DVD no sound
5 - Rendered, 33 seconds
6 - Imported the m2v file into En
7 - Used a template menu from Corporate- Blue Sky Menu WIDE to create a menu
8 - Used the m2v files as the Motion Video
9 - Rendered the motion menu
The results are that the motion happens for a few seconds then starts all over again. It never reaches the bottom of the screen.
It never reaches the bottom of the screen only comes down about 1/5 of the way.

Similar Messages

I can't get the patch select buttons to work in edit mode.

I can't get the patch select buttons to work in edit mode. When I select any template, the set buttons or the patch buttons don't work at all. My up and down arrows work fine but I need the on screen buttons to be assigned to my footswitch.

In edit mode, at concert level, select the pedal. Then in the screen control inspector, in the mappings tab, select actions>next patch.

How can I get the middle mouse button to work with the toolbar button?

Yesterday firefox stopped responding to middle-mouse clicks made in the bookmarks toolbar. Middle mouse buttons still work in web pages.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u '''Use hardware acceleration when available''']. All these settings/options/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme, option or hardware acceleration is causing issues. Disabling/enabling hardware acceleration, and some types of add-ons in normal mode may require a Firefox restart.
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.org/en-US/kb/Options%20window Options]

Can't Get Management Screens With Browser to work.

I open up my web browser and open a new page and enter: 192.168.1.1 but instead of being prompted for a user/password all I get is that the browser can't find the page.
I HAD the management pages up for almost two weeks now (after somehow getting logged on) but now I'm having the same problem. I've talked to someone online who says my router is defective. Is he right or is there some other secret in order to get this to work correctly?

To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, you need to reset the router to factory defaults. Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.

Cp8: Advanced interactions - Can't get 'Forced Navigation' through buttons to work

I am going a little crazy because I am tring to do something fairly simple, and I've done it before. I've reached a point of despair.
I'm just trying to do a 'forced navigation' thing where the user has to all of the buttons on a timeline before they:
1. Play audio file from the library
2. Show continue button (which is hidden in the properties panel)
My (failing) method so far is to do this:
1. Create a variable for each button that is equal to 0.
2. Create a Standard Actions that assigns a value of 1 to the variable (on success)
3. Attach the Standard Actions to each button.
4. Create a conditional action that says if the value of all the variables are equal to one, then the continue button will be shown, and the audio will play.
Seems logical to me, and other sources online seem to suggest that this is correct, but it doesn't work.
Can anyone help me out? I am desperate and in a hurry.

You need a conditional action with two decisions for each button. If you are on CP8, would recommend a shared action personally, and put it in a file that you can always reuse as external Library. For one button action will look like this:
There are multiple threads showing this same solution. And on my blog there are several use cases as well.

Can't get my geturl for buttons to work !

I'm working with a flash file from a template I got. I'm trying to link the "read more" buttons to individual pages. This is not working in flash. I manage to open one, but the rest of the buttons open the same page... not individually.
Here are the links for each button:
Button 1. Mexico is clicked the READ MORE button should get URL :
Button 2. Costa Rica should get URL: http://www.....co.uk/Tours/Costa%20Rica/Costa%20Rica%20Highlight%20Tour%209%20days%208%20n ights%20Selfdrive.html
Button 3. Panama should get URL: http://www.....co.uk/Tours/Panama/Panama%20Highlight%20Tour%208%20Days%207%20Nights.html
etc.
I basicly wrote:
on (release) {
geturl ("http://www.....co.uk/Tours/Mexico/Mexico%20Viva%20Best%20of%2011%20Days%2010%20Nights.html", "_blank");
The movieclip that contains the "button" has six diferent movieclips inside. I tried to convert them to buttons, but nothing.
I tried to use html without spaces, but it didn't work eather. I also tried to change instances but also nothing seams to work.
If someone could help it would be great! Thanks.
mishka
Message was edited by Jochem van Dieten

don't convert your movieclips to buttons (or vice-versa). go back to your unedited template before you changed anything.
click on the movieclip that contains your six "read more" objects. in the properties panel assign an instance name (eg, readmore_mc). double click on readmore_mc so you go to the timeline with your six "read more" objects. click on each one in turn and assign instance names (eg, mexico_mc, costarica_mc etc).
finally, return to the timeline that contains readmore_mc and in the actions panel type:
readmore_mc.mexico_mc.onRelease=function(){
getURL("the mexico url");
readmore_mc.costarica_mc.onRelease=function(){
getURL("http://www.....co.uk/Tours/Costa%20Rica/Costa%20Rica%20Highlight%20Tou r%209%20days%208%20nights%20Selfdrive.html");
readmore_mc.panama_mc.onRelease=function(){
getURL("http://www.....co.uk/Tours/Panama/Panama%20Highlight%20Tour%208%20Days %207%20Nights.html");
etc

Can't get the "Email Me" button to work

I added an "Email Me" button on my web site but when you click on it, it does not put my email address in the "To" section. How do I get this to happen automatically?
* My web site is posted to a web host (not Mobile Me)
* I already created an email address at the web host
The HELP section of iWeb says this about Adding an Email Me button:
" ..... clicking the button opens a new email message using the address on
your card in Address Book."
What do I call the card and how do I get it to link with the button?
Thanks for any input!

This old thread may help:

Can't Get the Facebook Like Button To Work

So I've put a like button on my website, and I can't seem to get it to work. I put my company's facebook URL as the target URL. Then I publish, click "like", and nothing happens. Will they not work while it's being hosted on BC? Do I have to upload to an FTP host before the widget will function properly?

Hello,
In the widgets Option you have inserted page URL as "http://https/www.facebook.com/pages/Mother-Ducts-Environmental-LLC/239947229505852?ref=br_ tf"
Please enter only "www.facebook.com/pages/Mother-Ducts-Environmental-LLC/239947229505852?ref=br_tf" (Without HTTP)
Reupload the site and then try.
Regards
Vivek

HT4623 I can't get to my settings, buttons not working and I just have a white screen. Any ideas on what is going on? Thanks for any help

I have tried everything I know of. It worked fine an hour ago. I have a white screen, buttons will not turn it off and I get get to anything. Any ideas whats going on?
Thanks for any help.

Sunny1963 wrote:
I have tried everything I know of.
That's fine - except nobody here knows what you have been able to think of try to this point.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
It really helps if you let others know "what you know of" and already tried.

How can I get Mighty Mouse scroll button to work?

My Mighty Mouse has started to not respond to the scroll button. Sometimes it will scroll up but not down at all.

If you don't mind losing warranty you mighty want to open your mouse. A good tutorial to do this can be found here: http://arstechnica.com/old/content/2005/08/dissect.ars
I already did this twice and it worked like a charm. But be aware that you do this on your own risk.

I can't get the variable with profile to work on the brush tool

I've seen videos of people using that way online but I can't. The option is there but doesn't work. it works with the pencil but i need to over lap stokes and pencil alters the previous stroke.

The brush tool usually applies a calligraphy brush automatically, but this type of brush is not supported by variable width profiles

Can't get my dropdown menu buttons to link to another scene.

I can’t get my dropdown menu buttons to link to other scenes within the same Flash file. The buttons are unresponsive during playback – as if no code were attached to it. Here’s what I have as my AS2 code on the dropped button that is supposed to link to the "Published" scene/page:
on(release){
_root.gotoAndPlay("published", 1);
I'm working with Actionscript 2.0 in Flash CS6.
Any help would be appreciated!
Thanks,
Robert

Hi kglab,
I do get these compile errors:
Scene=published, layer=Buttons, frame=1, Line 1 Statement must appear within on handler
Scene=published, layer=Buttons, frame=1, Line 2 Statement must appear within on handler
But, I think you are correct about the setInterval Loop. On the home scene I’ve created a movie symbol which is set to call another swf file:
loadMovie("frontSlideshow.swf", _root.movie1);
This frontSlideshow.swf file has the following code in every 10 frames:
this.stop();
pause = function ()
play();
clearInterval(pausei);
pausei = setInterval(pause, 5000);
This will pause the timeframe every 5 seconds before sliding to the next frame so that each image can be viewed. It seems odd that the code from this subclass file would affect the timeframe of the main class/file where the “movie1” symbol is located.
Best,
Rob

Can't get motion to open on Macbook Pro

Sorry guys, I haven't seen all discussions, but I just can't get motion (and live type) to launch on my new Macbook Pro. Final cut does work (as does DVD SP, Soundtrack Pro, compressor). Tried everything, New installs, new OS 10.4.10, everything. Crazy problems. Anyone an idea? Thanks in advance! Here's a logfile:
DNSServiceDiscoveryLookupServer(): {DNSServiceDiscovery.c:141} bootstraplookup() failed: $44e
AELicensing: CFNetServiceRegisterWithOptions returned (domain = 1, error = 2)
=====================================================================
0 bytes NOT freed (0 blocks)
Maximum blocks allocated at once: 0
Total blocks used: 0
=====================================================================

hi,
Motion does work on a macbook pro, coz I'm doing it right now! Do you have the intel version? Think it should work on older versions though.
that log file looks like it is trying to find the server for registration, for After effects? Not sure that has anything to do with Motion not booting up.
have you done the usual trashing of preferences and pList files?
regards
adam

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

Can I get a MBP with 32 GB of RAM?

Can I get a MBP with 32 GB of RAM?: I know someone is going to give me a 1-word reply: "NO".
But what I want to encourage is a bit of a discussion here. Why not 32 gb RAM? Isn't it about time? It can't be the price or?? Can't the software handle it?
I keep things a long time--- 10yr+ PBG4; 5 year MBP-13" --- and that's great when I could (and have) upgraded with more RAM, SSD's etc. But today's Macs are basically sealed boxes like an iPad I believe (talking MacBOOK / MBP's here, not iMacs)(although they are fairly tightly sealed nowadays, too!). So I really have to purchase thinking "What will I need in 2020 or 2022?" -or- "How do I win the lottery?"
Any comments appreciated -- I was planning to upgrade my mid-2010 MBP from 8 gb to 16 gb RAM (yes, you can… just this one model of that age) --- but perhaps save the $150 and put it towards a new one--- then again, $150 is only about 5 hours of an Watch so might just do that anyway…
Thanks,
Steve
Friday 10 April 2015

I believe this IS a problem -- it is an issue I have about not being able to run things without enough RAM.
And I think "No you can't" is not a very helpful answer at all! In fact I prefaced my inquiry / problem with my first sentence thinking someone like you would give just such a reply---- was trying to avoid that!
There might be companies out there like OWC or Crucial or I don't know who -- that could / might / might some day provide increased RAM for existing MBP's just like for my MBP 2010 that is spec'd at 8 gb max RAM but there is a 16 gb solution out there.
So if anyone else would like to try to solve this problem for me --
Best regards,
Steve S.
Friday 10 April 2015
<Edited By Host>

Can't get motion menus with buttons to work

Similar Messages

Maybe you are looking for